|
|
|
|
#1
21-12-09, 01:39
|
||||
|
||||
I finally got the manual off the royal signals site. That site isn't just user unfriendly, it's on the verge of user hostile. After two days and about a dozen requests I finally got the link and password.
The manual answered a lot of my questions. I'm also trying to get the manual for the wireless remote control No 1 but am getting another run around. Has anyone got any info on how this unit hooks to the 19 set?
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
|
#2
21-12-09, 01:53
|
||||
|
||||
|
Operating Instructions
Wireless Remote Control Unit No 1 (Canadian) RCA-113894, 5 Jan 43, or, DEIL-36XR298, 13 Nov 44, ZA/CAN1304. Basically any snatch plug from the Control Unit of the 19 set to the snatch plug of the RCU. For operation you need 2 RCUs...the nearby unit (with the 19 set), and the remote unit connected by field cable. You also need a 3V power source into the battery box. Don't fully jack in the key and plug assy until you are ready to send, otherwise dynamotor on 19 set will activate. For the finer points, ya gotta have the manual.
__________________
PRONTO SENDS Last edited by Jon Skagfeld; 21-12-09 at 01:54. Reason: Add ZA number
|
|
#3
19-01-10, 01:57
|
||||
|
||||
|
I have a few questions on these pieces too.
-about what year would that hand mike be and is it any better or worse than the regular ones? -what's the green control unit No 17 used for? -what does the control unit No 3 need for wires to hook it to the radio?
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#4
19-01-10, 02:22
|
|||
|
|||
|
The hand mic is a Tannoy power mic. It's probably 1943/44. It has a carbon element and is designed to hook to the intercom system. I wouldn't use it with the radio.
Control unit 17 is used in AFVs to connect wireless sets 31/38/88 to the 19 set system. Junction distribution box #3 was made originally for the driver/co-driver to buzz the commander regardless of which radio he is using. It attaches to the intercom system, not the radio, by 5 wires. It was later mounted on the outside of an AFV with a telephone enabling infantry to talk to the commander.
|
|
#5
19-01-10, 03:46
|
||||
|
||||
|
Is this the same control unit No 3 on the HUW setup?
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 19-01-10 at 03:52.
|
|
#6
19-01-10, 18:24
|
|||
|
|||
|
In the diagram you've provided for the setup that is a control unit #3B mk II, located below the variometer. This was pretty much standard for the truck/ground station. It has a large socket for the cable to connect to the WS19 proper. It also has at least 2 drop leads for the headsets.
The grey box in your photo (the one with button marked Call Commander) is not a control unit. It is a junction distribution box #3 and it's function was stated earlier. Other control units can be used, not just the 3B.
|
|
#7
19-01-10, 23:56
|
||||
|
||||
|
Bruce, would a Control Unit No 1 Mk 2 work there? I have one of those.
It looks like I have some extra stuff to trade if anyone's interested. -Tannoy power mic -Junction box No 3 -Control Unit No 17 I need some aerial stuff and another Wireless Remote Control Unit No 1 (Canadian)
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
 |
|
|
Hybrid Mode
