MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > Post-war Military Vehicles

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 15-11-09, 03:17
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,594
Default

The complete body in semi OD will be just around a gallon, unless you do multi coats. Most of the mutts I bought were sprayed or brushed in the (ugly) flat green on the inside. Expect to use about a gallon of the IRR flat green, and the other colors (black and OD) will be under a quart each.

Personally, I would do the semi gloss underneath, then undercoat the underneath including inside the wheel wells as was originally done with the Ziebart. Between the sandblasting effect of the wheels and the operators using the high temp steam jennies on the trucks, not a lot of the ziebart remained in the wheel wells.

Sandblasting will get into areas that the paint gun will not. Use extra effort trying to get paint underneath the strengthening lips on the top edges of the body.

Last edited by rob love; 04-02-11 at 01:32.
Reply With Quote
  #2  
Old 28-11-09, 19:01
Wpns 421's Avatar
Wpns 421 Wpns 421 is offline
Gilles Chartrand
 
Join Date: Nov 2009
Location: Merrickville, Ontario
Posts: 368
Default

Quote:
Originally Posted by rob love View Post
The complete body in semi OD will be just around a gallon, unless you do multi coats. Most of the Iltis I bought were sprayed or brushed in the (ugly) flat green on the inside. Expect to use about a gallon of the IRR flat green, and the other colors (black and OD) will be under a quart each.

Personally, I would do the semi gloss underneath, then undercoat the underneath including inside the wheel wells as was originally done with the Ziebart. Between the sandblasting effect of the wheels and the operators using the high temp steam jennies on the trucks, not a lot of the ziebart remained in the wheel wells.

Sandblasting will get into areas that the paint gun will not. Use extra effort trying to get paint underneath the strengthening lips on the top edges of the body.
The Ziebart is an expensive undercoating, what we use with are vehicles is an undercoating we purchase at Canadian Tire used to ba called Hippo Guard, it is easy to apply can be painted and is very tough. The cost is about $60 to $70 for a gallon. You apply the product with a rockguard gun. To do the underdide of an MLVW or M135 take about 1 hour. We have done 8 to 10 vehicles and no problems. Gilles
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 05:24.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016