Piece to identified!

[NORTH-SHORE(CANADA)]

Hi Bob,
That is not on a gun tractor but on the ford F15a i think is for a gaz can
Call me i home

[Rob Beale]

Those little brackets hold down the back of the seat frame which extends about one inch each side, and the wider bracket holds the front edge of the seat base, out of sight under the seat itself.

Could the window frame be from a HUP rear door?

Does the floor bracket behind the seat have a raised edge? Hard to see clearly in the image. I usually stow stuff behind the seat, but things can roll or slide while driving, so a shallow box would be a useful modification.

My C8AX has a raised angle frame fitted on top of the doghouse. Very useful to hold small bits and pieces on trips.

Rob

[NORTH-SHORE(CANADA)]

Those little brackets hold down the back of the seat frame which extends about one inch each side, and the wider bracket holds the front edge of the seat base, out of sight under the seat itself. Any pic????????

Could the window frame be from a HUP rear door? it come frome a C60L

Does the floor bracket behind the seat have a raised edge? Yes
Rob

[Jim Price]

Here's a picture of the seat frame.

Regards,
Jim

[NORTH-SHORE(CANADA)]

Thanks Jim for the pic
Any one for the back bracket or the window frame
For the plate in the floor i think is the battery holder home made

[Rob Beale]

The pics show a rear hold down clip for the seat from the side,

and the front clip looking from the front of the seat.

Now these seat clips are on a Chev. Note the seat frame has angle end pieces front and rear.

I have seen another style of seat frame with folded channels front and rear, which may be Ford. Whichever style you have the clips will work on both.

[NORTH-SHORE(CANADA)]

Hi
Thanks Rob
In the passenger side i have the sameting and 1 big long one for the front