![]() |
|
#1
|
||||
|
||||
![]()
I made up this composite drawing from some defense dept drawings to come up with a Mark IV mount for a single gun. I printed it out full size using a number of pages that I taped together and it'll make an excellent blueprint to reproduce a mount. I have the seat so I'm half way there already. If anybody wants full size drawings let me know and I'll post the images.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#2
|
||||
|
||||
![]()
I looked through my anti aircraft pix to see if there was anything else I wanted to post and noticed something on this one. There's the rod that the motley hooks to to stow it when not in use just to the left of the seat. You squeeze the handle on the mount part and the spring loaded pin pulls out of the way so you can hook the two pieces together. Then you let go and the pin fits into that groove in the vertical rod and the mount is held in place. I imagine that rod could be layed down on the floor when not in use though as it would get in the way sticking up like in the pic.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#3
|
|||
|
|||
![]()
Found this photo from the 12th Manitoba Dragoons in the National Archives of Canada.
Marco
__________________
Staghound F215633, 12th Troop "Sergeants Car" XII Manitoba Dragoons |
#4
|
|||
|
|||
![]()
On the size of the seat, and your seat. I understand that Yankee stadium has been "re seated" 3 times since it was first built, each time the seats are 2 inches wider. Our seats are getting bigger than they were when our "Boys" went off to fight in WWII.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#5
|
||||
|
||||
![]() Quote:
Marco, The Humber Scout Car, has the twin PLM mounting. I converted a single mounting to a twin for a Humber owner a few years back.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#6
|
||||
|
||||
![]()
I opened the Mk IV drawing for the single gun in Autosketch and put in the dimensions. The gun support arm is 1 1/2" square tubing, the legs and horizontal pipe under the seat are 1 1/4" O tubing, the vertical pipe that's attached to the seat is 2" O tubing, All the tubing is 1/8" thick wall.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#7
|
||||
|
||||
![]()
This looks like a simple mount with a bamboo chair for a seat. I like the Boyes mount too. I wonder if that bracket was simply bolted to the spare wheel so you could put it where-ever you wanted.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#8
|
||||
|
||||
![]() Quote:
Original AWM caption ID Number: 008801 Physical description: Black & white Summary: SYRIA, 1941-06. GUNNER J. WOODS (ON TOP) AND DRIVER T. KELLY, AIF, HAVE ADEQUATE DEFENCES AGAINST AIRCRAFT, TANKS OR INFANTRY. (PHOTOGRAPHER: F. HURLEY).
__________________
Cheers Cliff Hutchings aka MrRoo S.I.R. "and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night" MrRoo says "TRUCKS ROOLE" ![]() |
![]() |
|
|