|
|
|
|
#1
15-10-08, 02:54
|
||||
|
||||
pics
Chuck
these pics will help you. The original section of wood that fits across the top of the w/screen, has a shallow rebate in it .. the angle metal you see sitting on top of the tubular frame is supposed to fit into the rebate . I used a flat section of wood as I didn't have a router on hand to do the work. So , what you end up with is that angle metal piece should be flush with the wood.. sit in it rather than on top of it as in my pic. Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad 
|
|
#2
15-10-08, 03:10
|
||||
|
||||
|
Drawing
A QUICK DRAWING OF WHAT I AM TRYING TO PUT INTO WORDS !
Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#3
15-10-08, 05:54
|
|||
|
|||
|
Guys,
Thank you very much! This is a huge help. While digging in the shop tonight I found the angle metal piece that goes between the windshield frame and the wood. also I found the thick rubber pieces that go on around the roof hatch. On the dashboard, I've got two of the three toggle switches (instrument on/off, and Tail-White/Red), but need the Axle light toggle. Also, I'd like to replace my speedo at some point as mine is pretty tough. Thanks again for all the help!
|
 |
|
|
Hybrid Mode
