|
|
|
|
#1
07-06-08, 03:56
|
||||
|
||||
Alex...anecdotal and corrective post to your last...Hellyer, not Hillier.
Shame on you for mixing them up!!! See you at CC7? PS, BTW, has anyone thought of contacting Herb Danter of the Limber Gunner's Association?
__________________
PRONTO SENDS Last edited by Jon Skagfeld; 07-06-08 at 03:58. Reason: Add postscript. 
|
|
#2
11-06-08, 23:03
|
||||
|
||||
|
Herb Danter
Yes I did contacted him.
Herb has been moore than usefull to the 3BAM he is the father of it.
|
|
#3
12-06-08, 01:32
|
||||
|
||||
|
Gilles, I managed to find enough in Holland (16) to outfit one side of my limber for display. Now having said that, I had a 37MM Bofors anti tank gun and for it I used steel casings that were made up in a machine shop. I used the bottom of a shot gun shell with the primer to fire the casing. Rifle powder and black powder will make an impressive bang and flash. Be careful though with the steel blanks as they aren't as forgiving as the brass and a little extra powder will swell them up so bad they are almost impossible to remove from the breech.
 Ask me how I know.Cheers, Barry
__________________
Every twenty minute job is one broken bolt away from a three day ordeal.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
