What is unusual about this Sigvan?

[Keith Webb]

Originally Posted by jim sewell

QUOTE , All the photos I have of this wireless type truck show them all fitted with normal steel doors. This one was fitted with canvas doors.

This truck is a bitza , the cab is off a late model 4x4 Blitz fitted to a C15 wireless van and the dash plate is off a C60X .
In the picture attached you will see a very crude attempt to marry the cab which has the back cut away to the body of the wireless van.
As you would be aware the chassis on a C15 is narrower at the front than the 4 wheel drive so the side cab mounts do not match up .
The vehicle is a parts truck only .
Regards
Jim S.

So that explains it. I must admit I was thinking along similar lines as it was so unusual.

The C60X dash plate was from a RAAF refueller. Of course the sigvan was built in both a C15 (WO73) and C15A (WO12) version with the standard cab - be interesting to compare to see how the factory did it.

[jim sewell]

Of course the sigvan was built in both a C15 (WO73) and C15A (WO12) version with the standard cab - be interesting to compare to see how the factory did it.

Probably by having the side cab mounts iether wider or narrower apart to suit the chassis used .
The interior wheel arches are different on the C15 most likely to allow for the sharper turning radius which is why the chassis narrows at the front .
I read in the Holden book that GMH made 3 different cabs for CMP's , 4x4 , 2 wheel drive , 6x6.
Regards
Jim S.