|
|
#1
07-09-16, 01:35
|
||||
|
||||
please remove,it is sold
restauration project for sale!
M38A1 cdn2 1967,mostly complete except for rear seat and top bow brackets,front bumper and lifting shackles on the front.i have the titles,a mecanical inspection is needed to put it back on the road.engine turns but i haven't tried to start it,it's been stored in a shed for last 15 years so carb is dry.windshield frame is a bit bent backwards.comes with the heater.too many projects here so this one have to go!more questions let me know! located in stukely-sud,quebec.asking SOLD!!          
Last edited by tristan L.; 09-04-17 at 17:27. Reason: sold!! 
|
|
#2
08-09-16, 04:25
|
|||
|
|||
|
Hi what is your adress or phone number i live at 1 hour
|
|
#4
08-09-16, 12:38
|
||||
|
||||
|
It looks like Cdn 3 data plates as well.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers
|
|
#5
08-09-16, 13:35
|
||||
|
||||
|
There appears to be a spare data plate sitting on the passenger seat.
__________________
1953 M37 CDN 1953 M38A1 CDN 1967 M38A1 CDN2
|
|
#6
08-09-16, 15:29
|
|||
|
|||
|
Quote:
To the seller, are you familiar with the Home Hardware store in Dunham? They have quite the time machine for old surplus "stuff" in their back warehouse. I found a good condition USGI jerry can in there which was half-full of old engine oil, so it in not rusted in the usual places. I also remember seeing old fashioned marquis tent wooden poles. That is going back a ways!
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us!
|
|
#7
08-09-16, 20:26
|
|||
|
|||
|
The factory 1970 tank is the same Terry. The welded edge squarish tanks were early 80s replacement tanks contracted in Canada. The necks on them were terrible, and you had to fit the gas cap on them to get them to work.
There are a half dozen differences on a Cdn3 from a Cdn2 that are easy to spot. Things like closed hood hinges on a Cdn3, re-enforced spring hanger area on the frame at the forward mounts of the rear axle, re-enforcing squares welded to the body for the seatbelts, and of course the one piece rear axle shafts with the larger self adjusting brakes. None of the photos really show if this is the case or not, other than what looks like a Cdn3 rear axle flange.
|
|
#8
10-09-16, 00:55
|
||||
|
||||
|
sorry! i didn't got any notice that i had replies on this post.i will change the notification settings right now!
Rob,these are one piece axles from a CDN3.i read your very interesting reply in a post here about cdn2 and cdn3 differences,this one is a cdn2 according to the things you mentionned to check. Terry,yes i'm familiar with the dunham surplus.not much interesting stuff left unfortunately! yes Wayne there is another data plate on the seat,it's from my cdn3,i've put them aside to compare and forgot it when i took the pics. Last edited by tristan L.; 10-09-16 at 01:05.
|
|
#10
10-09-16, 01:52
|
||||
|
||||
|
Not unlike my first M38A1, it's a 1970 CDN3 but had a '67 rear axle in it...
I guess the motor pool Veh Techs used what was available.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers
|
|
#11
10-09-16, 03:19
|
||||
|
||||
|
Quote:
|
|
#12
10-09-16, 03:29
|
||||
|
||||
|
Quote:
|
|
#13
10-09-16, 04:12
|
|||
|
|||
|
Swapping the rear axle between years was slightly more complicated than ordering an axle. The U bolts and shock mounting plates also had to be matched to the correct axle since the tube diameters were different. There was a CFTO which advised of the parts needed when the proper axle was not available.
We even still had the odd 50s axle assembly, identifiable by the earlier brake system, floating around on vehicles towards the end. All this made for very confusing times for the poor guy trying to order parts.
|
|
#14
10-09-16, 04:42
|
||||
|
||||
|
The U bolts and shock mounting plates also had to be matched to the correct axle since the tube diameters were different.
i didn't notice this!!
|
|
#15
21-09-16, 12:31
|
||||
|
||||
|
price lowered from 2800$ to 2600$
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1967 m38a1 dash | Jeff Vandermey | Auction and Classified Ad Site Heads Up | 4 | 03-11-15 08:51 |
| Sold: 1967 m38a1 | oldlithgow | For Sale Or Wanted | 4 | 22-09-15 05:03 |
| Heads Up: 1967 Jeep M715 | Jack Innes | Auction and Classified Ad Site Heads Up | 0 | 03-09-15 20:02 |
| For Sale 1967 M38A1 CDN2 | Casey B | For Sale Or Wanted | 1 | 03-10-11 18:34 |
| M38A2 Cdn 1967 For Sale | Wpns 421 | For Sale Or Wanted | 0 | 12-07-11 03:27 |
Linear Mode
