MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 10-07-15, 11:32
Private_collector's Avatar
Private_collector Private_collector is offline
Tony Baker
 
Join Date: Oct 2010
Location: Wide Bay, QLD, Australia.
Posts: 1,819
Default Speedless wobbles

I get the same shimmy on my F15. It usually happens immediately after bounding out of a moderate pothole, of which we have MANY around my area. Have not had a chance to crack open the steering box yet, just learnt to tolerate the problem for now. I find the shimmy worsens quickly if I don't make a correction immediately. If a little steering force is applied L or R, then the wobble can be stopped in it's tracks. The first time it happened, I nearly pooped myself, because it was VERY violent. I hadn't learnt how to stop it at that stage, and because it was an isolated country road, I went for the brakes! It sure stopped the wobbles, because the truck literally came to a screeching halt. The silver lining was that I discovered the braking system is extremely good.

Curiously, I have not had this problem at a reasonable speed! In fact, once I go over 40-50km/h I can relax. Perhaps centrifugal force stops the problem occuring at higher speeds?!?! I do know the springs are good, so they shouldn't be an issue. Can't speak for the steering linkages, except they have no play which can be induced, or which is observable with movements of steering wheel back and forth. In fact even minor movements result in that movement being visible right through to the wheels. Can't feel any play in steering box at all, so the almost continual but very minor corrections needed to keep on course has me intrigued. For now, I am trying to resist the urge to disassemble the steering box, because I know it will become a full rebuild that I can't really spare the cash for just yet. Besides, I wouldn't be able to enjoy the challenge of driving a CMP.

The tyres I have on, are almost new. They are, however, Indian imports. If left sitting for some time (>1-2 days), they develop a flat spot that takes a couple of km driving to disappear. Once tyres are warmed up, they are fine. I think they have a bit of road noise, but can not really tell. The diesel engine is too noisy for me to be certain.

In near future I will be swapping the current tyres for a set of new NDBT ones. I will be curious to see if that change makes much, if any, difference to the wobbles. I will get the new ensemble professionally balanced before they are put into service. The current tyres/wheels had been balanced too, so I assume that isn't contributing (how's that for optomism!).

I am following this thread very closely. While certainly no comfort to know others are suffering same scenario, the suggestions are very, very, valuable to me, and if the tyre change doesn't fix the issue, the suggestions will assist me to know where to look next.

Thanks, to all contributors here
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still)
Medium sized, half fake, artillery piece project. (The 1/4 Pounder)
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chev and Ford 15cwt front "D" differences Keith Webb The Softskin Forum 14 24-12-21 18:51
Motor Oil: "Riding the Film" 1937 Chevrolet Engine Lubrication Hanno Spoelstra The Softskin Forum 2 21-01-14 10:27
"2 friends in front of 3 Jeeps" Harry Moon The Softskin Forum 6 14-08-12 16:19
New Book: "Amazing Airmen": "Canadian Flyers In The Second World War" RAF21 WW2 Military History & Equipment 1 27-11-09 03:30


All times are GMT +2. The time now is 01:59.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016