![]() |
|
#1
|
|||
|
|||
![]()
Hi All
Rick in your original request yous said "It has a PUROLATOR N-15 cartridge" but the last two post are showing photos of N-51. So would you confirm the number? Going back to my 1990 Catalog I don't find a N-51 listed but do find a P-51 listed which has a NAPA number of FIL 1100 which should be WIX 51100 here is the link to the NAPA site to the FIL 1100 see if these are closer to what you need. http://www.napaonline.com/Catalog/Ca...100_0297032254 these numbers look closer to your measurements. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#2
|
||||
|
||||
![]() Quote:
I read the Junior Military Filter cross-references to AC P-115 and Fram C-21. I'll check what the local car parts store can come up with, at least I have the NOS one to compare.
__________________
Regards, Hanno -------------------------- |
#3
|
|||
|
|||
![]()
Hi Rick,
Just looking at the dimensions of the elements you were seeking and I found these two filter elements when I was chasing them up for my F-15A: Fleetguard LF510 Length 4.87" Dia 3.97" Hole Dia 0.54" NAPA1006 Length 5.00" Dia 4.094 " Hole Dia 0.553" (WIX 51006) Length 5.007" Dia 4.094 " Hole Dia 0.553" Fleetguard LF 510 are available in Dandenong at Whitehorse Truck Parts and the WIX 41006 are available from Brisbane at Australian Engines. I bought a WiX 51001 from Australian Engines which has a 5.50" length which matched the original element from my F-15A I recall a local company in Melbourne that had WIX 51006 elements but I had to get the 51001 from Brisbane. A google search should find the local Melbourne agent for WIX filters. May have posted this photo before but if not here it is for comparison. Original F15A- Left, WIX51001- middle and Fleetguard LF 510- right Hope this is of some help and interest. Still have the Fleetguard LF510 if anyone wants it. Cheers,
__________________
F15-A 1942 Battery Staff Jacques Reed |
#4
|
|||
|
|||
![]()
Thanks Jacques and Hanno for the updating of this 2014 thread. I was successful and the Lynx has a new filter installed.
regards Rick.
__________________
1916 Albion A10 1942 White Scoutcar 1940 Chev Staff Car 1940 F30S Cab11 1940 Chev WA LRDG "Te Hai" 1941 F60L Cab12 1943 Ford Lynx 1942 Bren Gun Carrier VR no.2250 Humber FV1601A Saracen Mk1(?) 25pdr. 1940 Weir No.266 25pdr. Australian Short No.185 (?) KVE Member. |
#5
|
||||
|
||||
![]() Quote:
But none of the filters you listed are available in Europe. The guy at the local car parts store was very friendly and helpful (he even looked up my truck on the internet), but he could only find cross-references to cross-references leading to one and the same filter - which is too wide. I contacted Micha Korst of Jeep Dodge parts (http://jeep-dodge-parts.nl/) and he was very helpful and provided both the info and the filter in question: a Bosch P 9170 (order number 1 457 429 170, plus see the picture of the packaging for cross references to other brands). Attached are some pictures and the product data sheet: Bosch P 9170 ProductDetail.pdf. While it stands 23 mm smaller at 110 mm, the diameter of 98 mm is a good match (2 mm larger). The center tube is 1.5 mm too large at 14 mm (although they all seem to be around the 0.55" mark), but I minimized seepage with a couple of rings. I am happy to have fitted a new quality product. Will report back after the next oil change. If anyone finds another (European) match, please report about it here. HTH, Hanno IMG_0166.jpg IMG_0182.jpg IMG_0186.jpg IMG_0185.jpg
__________________
Regards, Hanno -------------------------- |
#6
|
||||
|
||||
![]() Quote:
A lot of application info here, it is a UK supplier and good price too. https://www.inlinefilters.co.uk/Bran...ann/FMH-PF925X
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#7
|
|||
|
|||
![]()
From the US government catoalogue for the mil junior filter, it offers the following manufacturers and their numbers. You will have to do a little research to go from the NSCM to their actual names, but you should recognize the part numbers. The 5 digit number preceeding the part number is the NSCM....:
Quote:
|
#8
|
||||
|
||||
![]() Quote:
EA041A8B-1997-42BF-9123-D213BAB1BECE.jpeg
__________________
Regards, Hanno -------------------------- |
#9
|
|||
|
|||
![]() Quote:
Just to close the loop on the NAPA Filter as the information might be of use see the 3 screen shots of the filter information. Screen Shot 2017-09-04 at 10.12.15 AM.jpg Screen Shot 2017-09-04 at 10.12.49 AM.png Screen Shot 2017-09-04 at 10.13.03 AM.png Rick just out of curiosity what filter Make and Number did you end up with? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
MK2 air filter | Ron Pier | For Sale Or Wanted | 5 | 10-12-09 14:49 |
Location of Oil Filter | Jim Price | The Softskin Forum | 0 | 01-10-08 03:05 |
235 oil filter | John Stokes | The Softskin Forum | 5 | 20-09-08 06:18 |
air filter | Bryan | The Carrier Forum | 0 | 17-06-06 19:14 |
Air Filter | BIG MIKE | The Carrier Forum | 1 | 17-10-05 14:54 |