HUP project started at last

[Jonathan Moore]

Hello Bob,

There are some pictures at the top of this thread and a description. That is, if you mean from the start of the project. If however, you mean what did I have to start with as far as the rear body and the roof, well then Nothing. The whole body has been constructed using the dimensions and photo's supplied by Robert Morrison, plenty of scaling and an in depth engineering knowledge. I can't thank Robert enough for his help. Its a shame but no one else seemed willing to supply any detailed information on line. There are plenty of photos of vehicles in bits on the forum but they are not detailed enough.

When I visited the War and Peace show in 2013, I measured a HUP that was in attendance and I couldn't find any problems so far.
I Have got a load of pictures of the body construction and a lot of dimensions so if you need any.

regards,

Jonathan

[8threcce]

Jonathan,

Find my restoration project ( HUM ) on facebook

https://www.facebook.com/ChevroletC8A

Regards

Pieter

[Keith Webb]

Originally Posted by 8threcce

Jonathan,

Find my restoration project ( HUM ) on facebook

https://www.facebook.com/ChevroletC8A

Regards

Pieter

Great way to share a project, please keep updating on MLU too.

By the way... your profile picture is not a HUM or a HUP but is an Australian CGT No8, and a really interesting photograph too, do you have a high resolution version?

[8threcce]

Hey Keith,

Yes I know however I found it such a beautiful picture, and it fitted nicely, but indeed you are right so I'm told.

Sorry but I don't have it in high resolution

[Jonathan Moore]

Pieter,

Lovely job, I know how much time and effort it takes. I don't actually do facebook, all too much hassle I fear. But I shall keep an eye on your project as its so close to my heart.

I've been busy, the roof is finished, apart from a bit of grinding. The rear sun roof took me longer than expected, it never ceases to amaze me how long making all the little bits takes. It now locks, lifts and moves as it should. The front passengers observation hatch is in place and for once this contains some original parts. The inner and outer frames were actually present and usable, as were the hatch catch and strengthening ribs. Alas the actual hatch is long gone and the fabricated replacement was rubbish so a new one had to be made.

Obviously and as usual, the only firm information that I have to work with is from the few dimensions and pictures supplied by Robert. As I don't have any original parts to copy this information has proved invaluable. The next job, is the rear wheel arches and guards. As I finish off grinding the roof, my mind has gone on to how to form the guards. Well It gives me something to dream about at night.

Regards,

Jonathan

[Haridimos]

Wow! can't believe my eyes! Congrats Jonathan!

Better than mine ..which is original!

kostas

[Jonathan Moore]

Thanks Kostas and I am glad that you like it. Encouraging comments such as yours, gives one the enthusiasm to continue

regards,

Jonathan

[8threcce]

Sheeting is looking good!!, come on over, can you do mine?? LOL

[Hanno Spoelstra]

This mammoth restoration ... erhm ... recreation is still progressing:

http://hmvf.co.uk/forumvb/showthread...vrolet-CMP-C8a

DSC02707.jpg

[8threcce]

Originally Posted by Jonathan Moore

Pieter,

Lovely job, I know how much time and effort it takes. I don't actually do facebook, all too much hassle I fear. But I shall keep an eye on your project as its so close to my heart.

I've been busy, the roof is finished, apart from a bit of grinding. The rear sun roof took me longer than expected, it never ceases to amaze me how long making all the little bits takes. It now locks, lifts and moves as it should. The front passengers observation hatch is in place and for once this contains some original parts. The inner and outer frames were actually present and usable, as were the hatch catch and strengthening ribs. Alas the actual hatch is long gone and the fabricated replacement was rubbish so a new one had to be made.

Obviously and as usual, the only firm information that I have to work with is from the few dimensions and pictures supplied by Robert. As I don't have any original parts to copy this information has proved invaluable. The next job, is the rear wheel arches and guards. As I finish off grinding the roof, my mind has gone on to how to form the guards. Well It gives me something to dream about at night.

Regards,

Jonathan

Jonathan

What kind of bearings did you use for the hatch handle to operate?
I see that you have added a slight rim to your sunroof was that original? mines just flat with an L-shape profile ( how did you make the rim it looks quite fancy )
What type of rollers did you use to make the roof slide? Do you have any spares


Fantastic work.. I'm just in the middle of mine as you know, but feel a urge to visit you .. and discuss details

Greetings Pieter

[8threcce]

Johnathan,

How much overlap does your hatch have versus the hole in the roof?

Seems I messed up my measurements..

Originally Posted by Jonathan Moore

Pieter,

Lovely job, I know how much time and effort it takes. I don't actually do facebook, all too much hassle I fear. But I shall keep an eye on your project as its so close to my heart.

I've been busy, the roof is finished, apart from a bit of grinding. The rear sun roof took me longer than expected, it never ceases to amaze me how long making all the little bits takes. It now locks, lifts and moves as it should. The front passengers observation hatch is in place and for once this contains some original parts. The inner and outer frames were actually present and usable, as were the hatch catch and strengthening ribs. Alas the actual hatch is long gone and the fabricated replacement was rubbish so a new one had to be made.

Obviously and as usual, the only firm information that I have to work with is from the few dimensions and pictures supplied by Robert. As I don't have any original parts to copy this information has proved invaluable. The next job, is the rear wheel arches and guards. As I finish off grinding the roof, my mind has gone on to how to form the guards. Well It gives me something to dream about at night.

Regards,

Jonathan

[Erik Nijenhuis]

Hello Jonathan,
I'm also working on the backroof from the HUP. Do you have the measurements on paper!
I have to make the roof also complete new.
By the way, you did a great job!

Greetings from the Netherlands,
Erik Nijenhuis