Mb jeep tranfer case oil seal

[Little Jo]

Originally Posted by jason meade

Hey Tony With your picture in your first post, was it 19 or 30 that oil is leaking from? Because if its parked and oil is leaking from 19 with out running, you may want to drain about 6 liters of oil out of it...your oil level shouldent be that high, if it is then you have bigger problems as oil is migrating from the t-84 wich it shouldent.
Jason

Hi Jason

Good call mate. I closely rechecked the TRANSFER CASE EXPLODED VIEW and admit I made a big time B#lls Up.. Lets start again at the beginning. The oil Seal is actually "30" not "19"- I did not follow the arrow. I have replaced "42" Output Shaft Oil Seal without experiencing any problems or having to use a screwdriver/chisle and hammer to hit it. But it is "30" that is turned out to be a real B##tch to remove, hence my request for advice.

I APOLOGISE TO YOU JASON -ALEX and LYNN FOR WASTING YOUR TIME WITH IN CORRECTLY RESEARCHED INFORMATION.

Cheers

Tony