|
|
#3
10-05-09, 22:07
|
||||
|
||||
I have solved this problem on other machines by drilling and taping a hole through the pully in the bottom of the V. The belt then hides your work. After you drill the pully assemble and drill a notch in the shaft, then tap the pully and use a grub screw with an allen key head.
__________________
Robert Pearce. Last edited by hrpearce; 11-05-09 at 04:28. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode