|
|
#1
27-03-14, 10:59
|
|||
|
|||
What is this??
Calling all gun experts! This turned up today, is it 25pdr limber , 25 pdr main gun axle , 17 pdr ?? over to you guys
It's on 8.25 x 20 wheels
__________________
Valentine MkV Covenanter MkIV Lynx MKI and MKII Loyd Carrier / English / Candian / LP. M3 Stuart Last edited by Andrew Rowe; 27-03-14 at 11:04. 
|
|
#2
27-03-14, 11:56
|
||||
|
||||
|
Hi Andrew, it is the main axle from a 25pdr.
Colin.
|
|
#3
27-03-14, 13:18
|
|||
|
|||
|
I think it might be a No. 27 limber axle but not the wheels.
|
|
#4
27-03-14, 13:35
|
|||
|
|||
|
I think the axle is upside down but I'm a bit confused, has the brake been repositioned? It is not a 25 pounder as they are tapered and don't have the box mounting arrangement the limber has.
|
|
#5
27-03-14, 13:40
|
|||
|
|||
|
The brake component's are from the No 27 limber ,looks like a bit of a mash up !
Rob...............rnixartillery.
|
|
#6
27-03-14, 16:03
|
|||
|
|||
|
The wheels are from a 3 tonner or similar.
__________________
Adrian Barrell
|
|
#7
27-03-14, 20:23
|
|||
|
|||
The handbrake lever on the lefthand side in the first photo appears to have been shortened at the top , been cut and rewelded about four inches down.
The wheels I have not seen before , have only a slight dish in them , doesn,t 25 pdr rims have 4 lugs on the outside of the rim?
__________________
Valentine MkV Covenanter MkIV Lynx MKI and MKII Loyd Carrier / English / Candian / LP. M3 Stuart
|
|
#8
27-03-14, 21:37
|
|||
|
|||
|
Andrew,
The 25 pdr is on 9.00/16" Artillery wheels, with a ring and bead and yes it has the lugs . Rob.................rnixartillery.
|
|
#9
28-03-14, 02:27
|
|||
|
|||
|
Axle
Hi Andrew,
You have found a Limber/Trailer No. 27 hubs and axle. Wheels are not 25pdr or Limber. Good find.
|
|
#10
28-03-14, 11:22
|
|||
|
|||
|
axle
rims are blitz 20" where as limber and 25 pr used 16" but bolt pattern the same, jerry rigged handbrake using a lot of original bits, limber axle. good find.
__________________
macca C15 C15A
|
|
#11
29-03-14, 10:13
|
|||
|
|||
Axle Identity Established
Thanks for the replies , so I think we have established that it is a no. 27 gun limber axle that should be on 9.00x 16 rims , threads on the wheel nuts appear to be BSF , as my Canadian ones off the Lynx don't screw on.
The rims in the pic are 20 inch CMP rims , I must have had a brain fade on the rims ,because I have a rear engine armoured car that uses these. Anybody out there restoring one of these Limbers ? Cheers.
__________________
Valentine MkV Covenanter MkIV Lynx MKI and MKII Loyd Carrier / English / Candian / LP. M3 Stuart
|
|
#12
29-03-14, 10:54
|
|||
|
|||
|
Andrew, brain fade at your age. You're on the way to being a SOB (silly old buggar)
I thought the small CMP wheel studs had BSF threads.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
 |
|
|
Linear Mode
