Nah....not that complicated
Time consuming yes.........
When you start fiddling with the linkage from the T case tower let me know. The rods going and out of the T case are adjusted by screwing the rods in or out....... however, to adjust you need to almost remove the T case.
One of the rods has a small piece....about 2 1/2 in. long.... with a pin sticking out from each side...... connects the shifter rods to the T case...... will need to dig into my photos to show yo what I mean...... I simplified the design by replacing the two pin part with a homemade version with the two pins on the same.....makes it easy to remove for adjustment without moving the T case.
You may also have to rebuild the holes in the many shifting rods if they have become oval with wear..... tight pin connections helps the adjustment process tremendously.
Hang in there.......
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
|