#1
|
|||
|
|||
HUP (HUW) Frame Question
Has anyone access to an original HUP (or similar) who can answer a question about the front frame channel that the cab cowl rests on?
My question basically is whether the HUP used spacers between the frame and the channel. The channel that came off my HUW (seen placed in location in the photo below) doesn't have spacers but I really can't recall if it ever did when I took it off years ago. It may have and they got lost. The second channel I have is taken off a Chev 60cwt and is the identical part. But when I took it off I attached the four spacers as seen in the pic. So did the HUP use spacers or not? The HUP front cowl has many differences and also HUP engines sit differently so anything is possible. |
#2
|
|||
|
|||
This may not be a very satisfactory answer... but reflects what I would do in your situation.
I suggest preparing and painting the channel and a set of spacers (make them if you don't have originals). I'm thinking of painting them separate from the frame so all sides are painted and look the same (also match frame and channel) and can be either put in or left out as appropriate. Once you have the main body in place on the frame, install the channel, do a trial assembly of the front end shell to the body and frame and check to see whether the spacer fits between the channel and the curved angle at the center of the front shell. If it fits, unbolt the channel and install spacers between frame rails and channel, if it won't go during the trial fit-up you don't need the spacers but you didn't lose a great deal in time and materials making them. |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
Is this what you are looking for?
Hi Bruce is this what you are looking for, this picture is of the end of the channel I think you are talking about, on my 1945 HUP pre-overhaul so this has never been taken a part for the any spacers to be lost.
Cheers Phil http://canadianmilitarypattern.com/R...ions%20001.jpg
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com Last edited by Phil Waterman; 01-10-22 at 18:36. Reason: Hit send to soon |
#5
|
|||
|
|||
Quote:
Thank you!!! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: RL-39 frame | John Carmichael | For Sale Or Wanted | 1 | 01-11-21 16:39 |
11 set frame | kevin powles | The Wireless Forum | 0 | 26-08-16 21:44 |
F 60 Frame | japes | The Softskin Forum | 3 | 26-10-09 02:07 |
Top Frame for F8 | Jim Price | The Softskin Forum | 3 | 07-01-09 06:34 |
MB frame | peter simundson | For Sale Or Wanted | 1 | 29-03-06 04:43 |