MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Armour Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-19, 07:47
Malcolm Towrie Malcolm Towrie is offline
Registered User
 
Join Date: Aug 2015
Location: Whitby, Ontario, Canada
Posts: 306
Default Hetzer preselect gearbox compared to Ferret

This is quite specific and I dont expect a flood of responses , but we have just acquired a nice restored Jagdpanzer 38(t), aka Hetzer, thanks to a rather wealthy benefactor.
It has a Wilson preselect gearbox, like a Ferret, or more correctly, a Praga-Wilson preselect gearbox. It has the same left hand pedal, similar to the gear change pedal on a Ferret. But what interests me is the gearbox is bolted directly up to the differential with no evidence of a fluid coupling like a Ferret, or a clutch.

It seems that, unlike the Ferret, the gear change pedal has two functions as it rises from the hull floor, first it engages the gear selected, and then clamps the band around the drum. This clamping serves as the clutch engagement. I say this because when you come to a stop, you have to depress the pedal and select neutral to prevent the engine stalling, unlike a Ferret.

Anyone any insight? Manuals for WWII German vehicles are damn near unobtainable.

Another thing I thought was interesting: the steering and brake drums are fully exposed. You can see the steering band clamp around a steering drum when you pull back on one of the (horizontal) tiller bars, and you can see the drum stop, confirming you are getting the designed steering radius for whatever gear you are in. The trouble is the steering radius is horrible, even in first gear. It's an extremely unmaneuverable vehicle. Much worse than a Sherman, and they're not great. And no neutral turn. So to aim that gun, you had to drive forwards or backwards. I can see the desirability of setting it up to fire down a bottleneck for oncoming tanks to keep you in the narrow 16 degree traverse range of the gun.

Malcolm

Last edited by Malcolm Towrie; 10-11-19 at 03:33.
Reply With Quote
  #2  
Old 02-11-19, 10:56
Richard Farrant's Avatar
Richard Farrant Richard Farrant is offline
Registered User
 
Join Date: Feb 2003
Location: Kent, England
Posts: 3,634
Default

Hi Malcolm
When the Wilson box was fitted in the prewar ERA racing cars there was no fluid flywheel or clutch.
__________________
Richard

1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2
Member of MVT, IMPS, MVG of NSW, KVE and AMVCS
KVE President & KVE News Editor
Reply With Quote
  #3  
Old 02-11-19, 15:16
David Herbert David Herbert is offline
Registered User
 
Join Date: Mar 2010
Location: Ayrshire, Scotland - previously Suffolk
Posts: 547
Default

Hi Malcolm,
If there was a fluid flywheel or clutch, it would be between the engine and the Wilson gearbox, not between the gearbox and the steering system.

Also the selection and engagement of gears in any Wilson box is done by engaging the band brake for that gear. Thus the selection and the clutch is combined into one action as there is effectively one clutch (the band brake) for each gear. When you press the pedal down fully, any brake band that was engaged is released (which is why you need to press it all the way down) and on raising the pedal the next selected gear is engaged. Only one new gear can be selected at a time as there is a hinged sprag for each brake band that only engages if pushed out by a cam. All the cams are on a shaft that is turned by the gear selection lever and only one sprag is pushed out at a time. So the CHOICE of gear is controlled by the gear selector lever and the disengagement / engagement by the gear change pedal.

I have no experience of Pz38t but I thought that the steering was similar to the system on British Crusader, ie a bevel box (no differential) to turn the drive 90 degrees and then epicyclic / band brake steering units inboard of each final drive to give: High, low and stop separately for each track ( or at least drive and stop). There must be brakes that work together for stopping the vehicle and on a small tracked vehicle designed in the 30s it would be very unusual for it not to be possible to engage them separately to give a pivot steer.

I expect to be corrected about the steering system so if anyone has a nice drawing of the system used in a Hetzer it would be great to see it.

David
Reply With Quote
  #4  
Old 02-11-19, 16:54
maple_leaf_eh maple_leaf_eh is offline
Terry Warner
 
Join Date: Mar 2004
Location: Shouting at clouds
Posts: 3,081
Default Steve Zaloga?

The first source that comes to mind is the prolific writer Steve Zaloga. If he doesn't have the information, he probably knows who does. No, I don't have his contacts.

The man is a professional writer, so don't expect him to cough up research for free. Be ready to pay costs.
__________________
Terry Warner

- 74-????? M151A2
- 70-08876 M38A1
- 53-71233 M100CDN trailer

Beware! The Green Disease walks among us!
Reply With Quote
  #5  
Old 02-11-19, 22:32
James P James P is offline
Registered User
 
Join Date: Mar 2016
Location: Canada
Posts: 386
Default

I can only suggest that you people send a couple reps to the next Thunder Over Michigan airshow and connect with G13/38t owners to become better acquainted with the vehicle you now have and the finer points of maintaining and operating it in a safe manner. Take notes, take pics, ask questions, become educated .

Last edited by James P; 03-11-19 at 01:30.
Reply With Quote
  #6  
Old 03-11-19, 01:59
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Did it not come with G13 manual? I would have thought for that kind of money it would
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #7  
Old 03-11-19, 06:07
Malcolm Towrie Malcolm Towrie is offline
Registered User
 
Join Date: Aug 2015
Location: Whitby, Ontario, Canada
Posts: 306
Default

Quote:
Originally Posted by David Herbert View Post
Hi Malcolm,
If there was a fluid flywheel or clutch, it would be between the engine and the Wilson gearbox, not between the gearbox and the steering system.

Also the selection and engagement of gears in any Wilson box is done by engaging the band brake for that gear. Thus the selection and the clutch is combined into one action as there is effectively one clutch (the band brake) for each gear. When you press the pedal down fully, any brake band that was engaged is released (which is why you need to press it all the way down) and on raising the pedal the next selected gear is engaged. Only one new gear can be selected at a time as there is a hinged sprag for each brake band that only engages if pushed out by a cam. All the cams are on a shaft that is turned by the gear selection lever and only one sprag is pushed out at a time. So the CHOICE of gear is controlled by the gear selector lever and the disengagement / engagement by the gear change pedal.

I have no experience of Pz38t but I thought that the steering was similar to the system on British Crusader, ie a bevel box (no differential) to turn the drive 90 degrees and then epicyclic / band brake steering units inboard of each final drive to give: High, low and stop separately for each track ( or at least drive and stop). There must be brakes that work together for stopping the vehicle and on a small tracked vehicle designed in the 30s it would be very unusual for it not to be possible to engage them separately to give a pivot steer.

I expect to be corrected about the steering system so if anyone has a nice drawing of the system used in a Hetzer it would be great to see it.

David
David, I messed up, didn't I. I can only attribute it to the lateness of the hour.

Yes, I'm familiar with how a Wilson preselect works (and a brilliant design it is), I just didn't word that second paragraph very well. I meant the Ferret doesn't need to use the bands as a clutch, in fact the manual warns against it, IIRC. So the gear selected for pulling away is selected, the gear change pedal is pushed down, the selected gear engages, the pedal is let up quickly so the band bites quickly, avoiding slippage, and the fluid coupling prevents the engine from stalling.

But the Hetzer appears to use the band as a clutch when pulling away from a stop. As I said, you have to select neutral (actually "0" on the plate) before letting up the gear change pedal at a standstill or the engine will stall.

Your description of the Crusader steering is interesting. That may be the design used in the Hetzer as the "differential" casing is surprisingly compact. It being a simple bevel box would explain that.

The Hetzer has brake drums outboard of the steering drums but as far as I can see, there is no way to brake individual drums to allow pivot steering. I'll double check.

Malcolm
Reply With Quote
  #8  
Old 03-11-19, 12:02
James P James P is offline
Registered User
 
Join Date: Mar 2016
Location: Canada
Posts: 386
Default

Have you contacted other 38(t) owners like Saumar, Bovington, Sinshiem, Munster or Bruce Crompton for assistance in how to operate the vehicle ?? You start beating the bushes and do some outreach via the net and no doubt you will connect with folks who can provide advice galore and printed material.
Reply With Quote
  #9  
Old 04-11-19, 01:14
Malcolm Towrie Malcolm Towrie is offline
Registered User
 
Join Date: Aug 2015
Location: Whitby, Ontario, Canada
Posts: 306
Default

James, I don't look after the Hetzer, I just got called to do a repair on it after it arrived and I was interested in the drivetrain. I believe the owner is awaiting some spares from Poland where it was purchased, and I have suggested that he gets copies of whatever manuals they have. I assume they have manuals since they completely restored it.

Malcolm
Reply With Quote
  #10  
Old 03-11-19, 05:18
Malcolm Towrie Malcolm Towrie is offline
Registered User
 
Join Date: Aug 2015
Location: Whitby, Ontario, Canada
Posts: 306
Default

Quote:
Originally Posted by Richard Farrant View Post
Hi Malcolm
When the Wilson box was fitted in the prewar ERA racing cars there was no fluid flywheel or clutch.
Richard, I'd heard the were used in race cars. I suppose the limited need for a clutch in a race car allowed the use of the bands as clutches.

I think the Wilson box must have been perfect for those old race cars. Preselecting the gear for the next corner would allow you to keep both hands on that huge steering wheel as you wrestled it into and around.

Malcolm
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hetzer - ONTR Museum Kolten Hooper The Armour Forum 4 08-03-18 00:37
Gearbox gaskets RichardT10829 The Carrier Forum 4 13-02-14 17:22
Blitz Gearbox Richard Coutts-Smith For Sale Or Wanted 5 16-08-08 10:57
Another Gearbox ID Bob Moseley (RIP) The Armour Forum 2 01-06-07 14:12
Ford gearbox Tim Berry The Softskin Forum 2 10-04-05 18:29


All times are GMT +2. The time now is 13:57.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016