MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > Post-war Military Vehicles

Notices

Reply
 
Thread Tools Display Modes
  #61  
Old 16-02-20, 00:43
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Finished with painting for now. All the body parts, other than the cab tub and doors are painted and stored.

The remainder of the truck is back inside for further disassembling. As usual, I have fallen well behind my desired timeline.
Attached Thumbnails
34148F46-CDCB-467B-B1FE-761ADBCCA11E.jpg   01AA09C3-9A75-4B38-BCE4-0AFF7255CFF5.jpeg   1B552E53-E61F-4D7E-BD07-2B24503903CC.jpeg   7124FBBF-EC82-49F0-9B60-E008D8B0D8E2.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 17-02-20 at 05:03. Reason: Manage photos
Reply With Quote
  #62  
Old 16-02-20, 17:28
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default Nice job......

Never worry about the time line............ years from now you will still be tinkering on it to add some details.....besides until it is completely fully finished it keeps you from starting another vehicle....

Bob C
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #63  
Old 16-02-20, 20:02
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Good point Bob... another vehicle project is exactly what I don’t need. I already have a couple of trailers lined up that need a bit of work to get on the road. My biggest problem is space for all the M37 parts scattered everywhere.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #64  
Old 17-02-20, 19:52
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Separation

Another small step this morning.
Attached Thumbnails
B2427583-40EE-4DE0-9123-CB932004FB03.jpeg   08F9A16F-AF61-48CE-B1BF-DD16DB071E31.jpeg   2729F4D9-24FB-40B4-BD77-44673EE961B1.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #65  
Old 17-02-20, 22:53
SteveJ's Avatar
SteveJ SteveJ is offline
Registered User
 
Join Date: Oct 2004
Location: Calgary Alberta Canada
Posts: 97
Default

Hey Wayne did you do your sand blasting down at Consolidated in Calgary. I thought your pictures looked like a familiar place. Nice work as usual by the way.
__________________
SteveJ
1943 Dodge WC52
1986 Armstrong MT 500 CDN Motorcycle
Reply With Quote
  #66  
Old 17-02-20, 23:03
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

Quote:
Originally Posted by Bob Carriere View Post
Never worry about the time line............ years from now you will still be tinkering on it to add some details.....besides until it is completely fully finished it keeps you from starting another vehicle....

Bob C
And add to that statement that when you finally do finish it, it will all be downhill from there. The first scratch, the first dent, the first breakdown, the burned out headlight.........
Reply With Quote
  #67  
Old 18-02-20, 00:53
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Quote:
Originally Posted by rob love View Post
And add to that statement that when you finally do finish it, it will all be downhill from there. The first scratch, the first dent, the first breakdown, the burned out headlight.........
Yes, I don't expect that I will get bored. There always seems to be something to do.

Steve: Yes, Consolidated Compressor is the spot. Its so nice to have unlimited air and sand. I sold my sandblaster because it was so frustrating waiting for the compressor to catch up, and then stopping to dump another bag of sand in the tank.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #68  
Old 18-02-20, 01:25
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Wires

The most widespread issue on this truck is the aged and damaged wiring. Almost every single wire has bare sections where the insulation has dried, cracked and fallen off. If I bend a wire, the insulation immediately disintegrates. One large power cable for the slave receptacle was routed in such a way that it was pinching between the brake peddle arm and the floorboard. It would be a fairly major (and frustrating) undertaking to replace a vehicle wiring harness without removing and stripping the cab from the frame. For me, one if the things I’m looking forward to is getting all new wires, fuel lines and brake lines on the truck.

Some examples of crispy and damaged wires:
Attached Thumbnails
F80F5EB6-9FA0-4009-9215-ACF2B1A73702.jpeg   6144B86E-BF23-472B-A02D-596177648DD7.jpeg   7F48A424-F75C-4161-BB0E-3154E060ADF4.jpeg   D6DF5364-6ABD-45A0-8BE6-A1740212D669.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #69  
Old 23-02-20, 20:29
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Engine & Trans

Lifted the engine and transmission out yesterday. Unfortunately I need to go away for work, so it will be a couple of weeks before I can get back at this.
Attached Thumbnails
66FFECE6-77CC-4D9A-9749-22AA369C0AC3.jpeg   520050CE-B81D-4324-BC94-6EE4DFBEC9A8.jpeg   C6A868B6-1E0B-46C3-839A-5624A4108E40.jpeg   7A26817B-B3E9-44F2-ACDB-D0924AE6AA7D.jpeg   71F003B6-4C84-4086-B048-82A7FE911A1B.jpeg  

__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #70  
Old 26-02-20, 08:18
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Hole-tunnel

At some point someone had a need to cut a crude series of 4” to 6” holes to create a passageway from under the drivers seat, through the back wall of the cab, through the front wall of the cargo box, and then through the cargo box floor into the tool storage area. I have no idea what it was for. Some of the holes were cut out with a torch, and some with a mechanical cutting tool (possibly something like an air chisel). The holes were not pretty.

I repaired the cargo box floor and front wall many months ago, and finally started on the cab repairs.

A few photos of the tunnel of holes... I’m puzzled by this one.
Attached Thumbnails
832AACF7-C768-4B93-B8F2-93F224BAF80D.jpeg   8774A68F-D171-4406-8E64-50FC8DADDE0E.jpeg   CF48EE98-FACF-48A4-8E8D-24E764510EDB.jpeg   B38620EC-A392-4B31-BADA-806BD2A4F310.jpeg   2F8EFE2B-6CFC-461E-A38B-F0AE9802F879.jpeg  

__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #71  
Old 26-02-20, 08:24
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

This is what the holes in the cargo box looked like.
Attached Thumbnails
6A852972-A777-493C-92CC-27DDF71E325A.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #72  
Old 22-03-20, 03:12
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Cab tub

Cab tub bottom side. Kind of dirty and crusty looking, but very solid. Should be like new once cleaned up.
Attached Thumbnails
D3EC786C-C42E-4A9E-8040-CC5A7D87594A.jpeg   4667D908-0D6F-4921-99D1-F405B9F70187.jpeg   8AF3142F-F0C3-4AEB-BE54-0E4AF197B4C8.jpeg   35E19379-2232-4B3E-8612-D86E1D3D82EC.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 22-03-20 at 03:20. Reason: Photo add
Reply With Quote
  #73  
Old 22-03-20, 03:16
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Transmission

I opened up the transmission a couple of weeks ago. Very clean with new looking oil. No rebuild tag.
Attached Thumbnails
E9377462-1AA5-4DEC-A3A8-D9522628E5C4.jpeg   D8C5755D-BEF7-4BF6-82CB-6C167D4F8AE9.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #74  
Old 21-05-20, 06:27
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Over the past several weeks I found some time to finish repairing the holes in the cab under the driver’s seat, stripped the doors and rebuilt a winch and PTO. I’m planning to get the frame stripped down this weekend and ready to sandblast next week. Hopefully the weather cooperates for the sandblasting.
Attached Thumbnails
D314C1C0-AFF3-4BC4-9096-9F5DBBB53057.jpeg   102B9127-496E-4233-A952-19A1BFC13990.jpeg   C4403D09-F2EC-483E-84E7-D22BD77E339E.jpeg   D394D2B9-786E-4799-8562-F6B7C143230C.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #75  
Old 21-05-20, 13:40
Rob Crombie Rob Crombie is offline
Registered User
 
Join Date: Aug 2015
Location: Ottawa Area
Posts: 17
Default

Hi Wayne,

Looks like great progress. Did you find the frame to be straight and free of rust? I found the middle cross member on my truck to have pretty well rusted through from the inside where it attaches to the frame rails. It all seems to have occurred from trapped dirt and moisture.
I’m looking forward to watching this truck go back together.

Rob
Reply With Quote
  #76  
Old 21-05-20, 19:19
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Hi Rob. I haven't taken any measurements to confirm frame straightness, but there is no damage evident on the frame or body components to indicate any trauma has ever occurred to the truck, and there are no tire-wear indicators. The frame condition is excellent with no rust. The black frame paint is almost fully intact where bits of the layers of OD and flat green paint have flaked off during my pressure washing. This truck appears to have been in the west for its entire life, where it was not exposed to road salt etc. Ill post a few more frame section photos in the next couple of days.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #77  
Old 23-05-20, 05:15
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

A few photos of the cross members. Rob: I’m assuming you had trouble with the large boxed-in cross member to the rear of the transfer case. All cross members on this one are solid. They should clean up nicely.
Attached Thumbnails
1528FACD-C3AB-4751-93E9-21D0E9DFA0D6.jpeg   36236AD7-8D80-4704-91AA-CE57987E3C3D.jpeg   D7830EB0-BDD9-4BB8-AE67-0851FD9C4C61.jpeg   56E1D15B-6C61-48B8-B2FE-C76A8495AA03.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #78  
Old 23-05-20, 13:50
Rob Crombie Rob Crombie is offline
Registered User
 
Join Date: Aug 2015
Location: Ottawa Area
Posts: 17
Default

That does look really solid. The boxed cross member is the only one that warrants repair on my truck. It was utterly rotten where the spring perches are, and had several pounds of dirt/rust inside. So out it will come to be patched up. It has also done a number on the fuel and brake lines where they pass through the cutouts in that crossmember. What are you planning to replace your lines with? I decided to go with some copper/nickel alloy lines as They should outlast steel, and are easy to work with.
Reply With Quote
  #79  
Old 23-05-20, 16:03
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Yes I can see how that would have an unfortunate impact on your leaf spring mounting brackets. Let me know if you need any measurements or photos as you fabricate the pieces for your repair.

I haven’t made any decisions on material for the replacement brake and fuel lines, but that will be needed soon enough. I did however pick up a few lengths of stainless steel coil armour for the new lines.
Attached Thumbnails
22E31513-2416-4C94-BAA1-DAEF7AA7DD01.jpeg   E6C4388A-882D-487F-B057-DC053780359B.jpeg   69E7B31B-BA7C-4B1B-9592-F87E0C4E1A10.jpeg   902CAA4A-113C-43E6-A43F-8D61563966F2.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #80  
Old 25-05-20, 00:37
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Frame ready to go for blasting.
Attached Thumbnails
F54D6455-CAEA-41D3-9CD4-075F4BCFFC06.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #81  
Old 26-05-20, 06:26
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Well, today I learned that the major tire shops won’t even touch the split locking ring wheels like on the M37. I even went to a commercial shop that does heavy duty equipment, highway trucks, farm equipment, etc. They looked at me like I was carrying a bomb in my truck. I was planning to stop at a non-franchised shop on my way home, but ran out of time and decided to give it a try myself.

I did a quick review of Bob’s 2016 thread where he tried out his fancy new tool on some stuck CMP wheels and tires and got a few ideas.

I tried breaking the bead with my pickup on one side of the tire, and tractor bucket on the other... no luck.
Attached Thumbnails
E31BC1CD-00D1-4D15-B646-E3692C1BF1C6.jpeg   E15EA523-01F5-4E0D-A7E7-0C5CAA2A44D4.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 26-05-20 at 06:34.
Reply With Quote
  #82  
Old 26-05-20, 06:33
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

That’s when I realized that I would have to cut the tires off. So I copied the method described by Jacques Reed in Bob’s thread. After learning the technique on the first tire, I was able to salvage the flaps on the other 3. I have one more to do tomorrow.
Attached Thumbnails
EE0F5E1F-7ABF-46BD-82C6-636883CA333A.jpeg   BBEA6AE4-EB60-4551-B662-BD5D24AC817D.jpeg   4B64517E-E365-4AF0-9B1B-31963B132596.jpeg   36701D7B-9403-43B6-A89A-F4596EF10EF1.jpeg   A1CF1351-9597-4954-959D-B7B182402578.jpeg  

__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 26-05-20 at 06:38.
Reply With Quote
  #83  
Old 26-05-20, 06:48
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

While handling the wheels and tires, I noticed that one of them was particularly heavy. It felt like it was a loaded tire, but no sloshing noise. As I was cutting that tire, I found it to be almost twice as thick as all the others. It was 8 ply rating Good Year tire, just like all the others. Cross-section comparison below.
Attached Thumbnails
DDDE18AE-E8F7-45D4-9B58-801DBFE2C8B2.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #84  
Old 26-05-20, 12:21
David Herbert David Herbert is offline
Registered User
 
Join Date: Mar 2010
Location: Ayrshire, Scotland - previously Suffolk
Posts: 547
Default

I would have thought that a small amount of damage on a flap wouldn't cause much of a problem as long as it would sit flat without big bits missing. As for the heavy tire, that is very odd. It's not a run-flat but all that extra rubber got there somehow.

I have had success in the past using the stabilizer leg of a truck with a crane on it to crack the bead loose. In your photo of the pickup and tractor you do look to be achieving something. I know it is hard work cutting tires off - I burnt out a nearly new 9" angle grinder doing it once.

David
Reply With Quote
  #85  
Old 06-06-20, 07:07
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

Quote:
Originally Posted by David Herbert View Post
...As for the heavy tire, that is very odd. It's not a run-flat but all that extra rubber got there somehow.
From the 5 tires, 2 were of the thick/heavy variety. Upon closer inspection I note the thick ones are designated as "BLX 8 ply". Anyone know what BLX indicates?

UPDATE: I found the following paragraph online from TM 9-1870-1
Attached Thumbnails
10DC6D16-194D-40A5-AAE6-D37F5C40081F.jpeg   6DD72BDF-ABD3-4A15-B5E1-BB6C120B4B4C.jpg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 06-06-20 at 15:41.
Reply With Quote
  #86  
Old 06-06-20, 07:15
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Turning point...

I was able to get out and sandblast the frame, wheels and other miscellaneous frame brackets today. Once the frame paint goes on, I can start the rebuild process. Things are now moving in the right direction.
Attached Thumbnails
87EA6B0F-D04E-48AB-9B76-67593439F10F.jpeg   3D5BD10B-0E65-466F-822A-DAE3A81A479C.jpeg  
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #87  
Old 06-06-20, 16:28
Dan Martel's Avatar
Dan Martel Dan Martel is offline
Centurion nut
 
Join Date: Jan 2007
Location: Mississauga
Posts: 224
Default

Quote:
Originally Posted by Wayne Hingley View Post
If anyone out there can help, I have a few questions as listed on the photo attached.

The second photo is on parade, and the formation sign appears to be red background with yellow maple leaf.
Wayne,

Sorry for the late response but I've just seen your thread for the first time today. I think I can help you with your questions about markings for your truck.

In 1958 the Canadian Army Field Force reorganized from an infantry division to separate infantry brigade groups.

According to Annex F, Vehicle Unit Signs, of CAMT 1-36 Vol III, the unit sign for the infantry battalions of an Infantry Brigade Group was a red backing with a white serial. The serials used were 7, 8 and 9, which were allocated based on the seniority of the battalion within the brigade group. As the Black Watch would always to junior to the Van Doos, the other regiment in 3 CIBG, their serials would be either 8 or 9. These instructions applied to all three infantry brigade groups in Canada and to the one in Germany.

The formation sign would have been for the 1st Canadian Infantry Division rather than for Atlantic Command. All of the Canadian Army Field Force units within the brigade groups were designated as a part of 1 CID. Non-field force units would have used the Atlantic Command shield. So you're correct about using a red rectangle with a gold maple leaf.

Now the light coloured squares are a bit of a mystery. I'm inclined towards tactical signs, which would have designated which company and platoon the vehicle belonged to within the battalion. But it's hard to tell from the photographs. I don't think it would make your vehicle any less authentic if it didn't have them.

Cheers,
Dan.

PS: I've attached Annex F should you wish to have a look.
Attached Files
File Type: pdf Vehicle Unit Signs Bde Gp.pdf (134.2 KB, 13 views)
Reply With Quote
  #88  
Old 06-06-20, 17:24
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default Thank you Dan!

Many thanks for the help and explanation of reasoning behind the markings, Dan. I really appreciate your help. Darrell Zinck has offered to help me get access to do more research for additional photos in Gagetown, but the travel restrictions have slowed my ability to be in NB for the past few months. Hopefully something will turn up regarding the white squares that appear to be on all four sides of the vehicles. Your suggestion of it being an indicator of Coy/PL sounds reasonable. Perhaps that will become less of an unknown with more photos. Now I can begin to prepare the markings on some of the painted pieces.
__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2
Reply With Quote
  #89  
Old 06-06-20, 22:57
Rob Crombie Rob Crombie is offline
Registered User
 
Join Date: Aug 2015
Location: Ottawa Area
Posts: 17
Default

Looks good. I had the same fight with the tires. I tried quite a few things but nothing would budge them. Thankfully the local truck tire shop was willing to break them down, and did so without damaging anything.
I’m looking forward to watching your truck go back together. It’s always a good feeling on any project when you turn the corner from disassemble and clean/ repair to putting everything back together again.

Cheers,
Rob
Reply With Quote
  #90  
Old 15-06-20, 01:42
Wayne Hingley's Avatar
Wayne Hingley Wayne Hingley is offline
Registered User
 
Join Date: Aug 2015
Location: Water Valley, Alberta
Posts: 733
Default

With a makeshift rotisserie, I got some frame paint on today. Hoping for decent weather tomorrow to spray some semi gloss OD.
Attached Thumbnails
1802AEDC-8AEE-45FA-AC71-DEA0953CD117.jpeg   10610786-9437-4DB0-97C9-C7CE5EC850C7.jpeg   148AB994-2EE6-43C6-9DB4-D02F077D52AC.jpeg   01B278D2-4864-47CA-91FD-A865854B894C.jpeg   11B327D2-CCE5-4EFB-B2A1-C4CEC35FDF8F.jpeg  

__________________
1953 M37 CDN
1953 M38A1 CDN
1967 M38A1 CDN2

Last edited by Wayne Hingley; 15-06-20 at 16:13.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
19 set restoration universalgrl The Wireless Forum 0 10-01-14 18:51
4.5 Restoration James Shopland The Gun Park 7 18-03-13 16:38
19 Set Restoration Bruce Parker (RIP) The Wireless Forum 3 07-09-12 08:46
Cab 12 7A2 FAT for restoration Keith Webb The Softskin Forum 1 03-04-07 13:20
F8 for restoration david moore The Softskin Forum 32 21-06-05 14:47


All times are GMT +2. The time now is 13:45.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016