MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 14-07-15, 13:31
Chris Collins Chris Collins is offline
Registered User
 
Join Date: Dec 2014
Location: Bacchus Marsh, VIC, Australia
Posts: 47
Default An Introduction: Chris Collins and Morris Tilly Project

Hello All,

Allow me to introduce myself, my name is Chris Collins, Reenactor Anglophile and now Military vehicle owner! Here is the Tilly that Hugh Davies had located for me, a rather battered relic, but due to its location has remained largely free of serious rust. Heres some new shots of it in my mates workshop.






Our first step is to strip back to the "chassis", make it sound then on to the steering and suspension, so bits are progressively being sent off to the local sand blaster then being undercoated, plenty of "minion" work for an unskilled/inexperienced knucklehead like myself, leaving the more technically challenging work for my Mate /mentor/master John Neville.

Unexpectedly an opportunity came up to acquire some more! through Hugh Davies and negotiations by John Neville, i met Lenny Watkins, who offered me two more, it was an all or nothing offer, as he said as soon as you see the good one you won't be able to leave it. Despite initial misgivings, I don't regret getting them both. Especially since much of the sheetmetal of the "rough" one is sadly as thin as egg shells and of little use. We may get an engine and lots of useful fittings out of it though.





The Good one is, extremely complete, its not without issues but despite not being ran for 15-20 years with new points, goes! and moves under its own steam! Very exciting! My Wife has named it, rather appropriately, Matilda! Its not without its isues and may need the sacrifice of a morris 10m









Since a feature on the first tilly was placed in Tilly Text, a chap called Andrew Curran in Perth, currently restoring a Austin Tilly offered me parts he rescued from a Morris Tilly in a garage due for demolition many years ago, which should be arriving tomorrow at my work. Exciting times!

Chris Collins
__________________
Military re-enactor and modeller
Reply With Quote
  #2  
Old 14-07-15, 14:36
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Chris,

Welcome on MLU and what a great (set of) project(s) you have there.

One thing I would like to ask you is to attach pictures to your posts rather than using links to Photobucket - we have learned the hard way that one day sooner rather than later they will disappear making this thread worthless.

Here is how you learn how to post images - let me know if you have any further questions.

Thanks!
Hanno
Reply With Quote
  #3  
Old 14-07-15, 15:25
maple_leaf_eh maple_leaf_eh is offline
Terry Warner
 
Join Date: Mar 2004
Location: Shouting at clouds
Posts: 3,081
Default

That is a cute looking little vehicle! And good thing you saved it from becoming razor blades or shopping cart frames.

In a strange way you are getting into the hobby with the best motivation - you have found something(s) that attract your attention, and you want to make things right. This might be why Jeeps, Land Rovers, Universal Carriers and the relatively small CMP trucks get so much work. The uglier one (not saying anything about the owners...) are the big vehicles with funny lines or very heavy parts, seem to get no respect. There is a thread from a fellow in Czech Republic I think whose passion is a great big 10-ton Mack heavy hauler. Only a true devotee has that kind of time, space or money for a project like that.
__________________
Terry Warner

- 74-????? M151A2
- 70-08876 M38A1
- 53-71233 M100CDN trailer

Beware! The Green Disease walks among us!
Reply With Quote
  #4  
Old 15-07-15, 03:10
Mike Kelly's Avatar
Mike Kelly Mike Kelly is offline
Fan of Lord Nuffield
 
Join Date: Feb 2003
Location: Victoria Australia
Posts: 5,605
Default book

Chris

I think I met you on the HMVF

I have a Morris tilly parts book

If you twist my arm I might let you have it

if you catch me on a good day that is

Mike
__________________
1940 cab 11 C8
1940 Morris-Commercial PU
1941 Morris-Commercial CS8
1940 Chev. 15cwt GS Van ( Aust.)
1942-45 Jeep salad
Reply With Quote
  #5  
Old 16-07-15, 13:13
Chris Collins Chris Collins is offline
Registered User
 
Join Date: Dec 2014
Location: Bacchus Marsh, VIC, Australia
Posts: 47
Default Take Two Tilly Pics

Hello Hanno,

hope this is better from an archiving point of view!

Maple_Leaf_eh: Thank you very much for your sentiments! Besides the obvious charms of owning a Military vehicle, something a bit different from the usual, i also like the idea of helping to preserve something evocative of a very different time and place. and you're right its amazing how many CMPs floating around in Australia, that just don't get much love.

Mike Kelly: Yes I recall chatting to you on HMVF, that parts manual would be a very nice thing if one day you decide to part with it. There was allegedly one floating around at Corowa this year but it changed hands before i got the chance to get it.

Cheers

Chris Collins
Attached Thumbnails
loading.jpg   sydney trip.jpg   rear.jpg  
Attached Images
  
__________________
Military re-enactor and modeller
Reply With Quote
  #6  
Old 16-07-15, 13:24
Mike Kelly's Avatar
Mike Kelly Mike Kelly is offline
Fan of Lord Nuffield
 
Join Date: Feb 2003
Location: Victoria Australia
Posts: 5,605
Default book

Quote:
Originally Posted by Chris Collins View Post

Mike Kelly: Yes I recall chatting to you on HMVF, that parts manual would be a very nice thing if one day you decide to part with it. There was allegedly one floating around at Corowa this year but it changed hands before i got the chance to get it.

Cheers

Chris Collins
The book is dated December 1940 , an early date for a tilly publication . I loaned it to a guy in West. Aust. , he also has a Morris tilly and he was planning on restoring, don't know if he ever did .

The book is just sitting here so it may as well go to a good home . It has large fold out drawings in the back . They refer to the mono chassis .

send me a PM Mike
__________________
1940 cab 11 C8
1940 Morris-Commercial PU
1941 Morris-Commercial CS8
1940 Chev. 15cwt GS Van ( Aust.)
1942-45 Jeep salad
Reply With Quote
  #7  
Old 02-03-16, 12:00
Chris Collins Chris Collins is offline
Registered User
 
Join Date: Dec 2014
Location: Bacchus Marsh, VIC, Australia
Posts: 47
Default An Update!

Time for an update! below you can see much of the progress we've made so far, note SCC2 brown made up based on Mike Starmers mixes (from Tilly Colours a great little resource), suprisingly close to the colour of several parts we're finding here and there (not to mention ammo boxes).


A nice original feature we have on the diff housing on the SA tilly is a partially whitened diff, no doubt for the convoy light, kind of suprising it would have such a feature as you could barely see it from another vehicle

Another project we are contemplating is the steering wheels, the originals are badly degraded and we're debating either finding better new old stock examples or homebrew recasting them using High impact resistant resins, A local wheel restorer quoted a scary figure. we're figuring they must be a pretty common wheel used in a variety of Morris/BMC vehicles and we're hoping some might surface (hint hint...)

Cheers

Chris Collins
Attached Thumbnails
Rear axle 1.jpg   rear axle 2.jpg   Front axle.jpg   Diff White.jpg   steering wheels.jpg  

__________________
Military re-enactor and modeller
Reply With Quote
  #8  
Old 18-04-16, 13:08
Sterling Ball Sterling Ball is offline
Sterling Ball
 
Join Date: Nov 2015
Location: Australia
Posts: 26
Default

looking really good Chris wont be long and she will be done!

Sterling
__________________
1941 BSA WM20
Reply With Quote
  #9  
Old 18-04-16, 13:22
Chris Collins Chris Collins is offline
Registered User
 
Join Date: Dec 2014
Location: Bacchus Marsh, VIC, Australia
Posts: 47
Default

Thanks Stirling!

just wait till i unveil its secret!

http://www.austintilly.nl/H23073a.jpg


Jerry won't know what hit them!
__________________
Military re-enactor and modeller
Reply With Quote
  #10  
Old 18-04-16, 14:06
Chris Munford's Avatar
Chris Munford Chris Munford is offline
Registered User
 
Join Date: Dec 2014
Location: Geelong, Australia
Posts: 62
Default

Looking good so far Chris. Interesting set up of the twin brens, I assume that is just the standard twin mount they used on other vehicles?
__________________
MB jeep #227875
42 WC-56 Command Car
Reply With Quote
  #11  
Old 18-04-16, 17:36
maple_leaf_eh maple_leaf_eh is offline
Terry Warner
 
Join Date: Mar 2004
Location: Shouting at clouds
Posts: 3,081
Default

I've seen roadkill animals with more meat on them than this unfortunate specimen.

Good luck
__________________
Terry Warner

- 74-????? M151A2
- 70-08876 M38A1
- 53-71233 M100CDN trailer

Beware! The Green Disease walks among us!

Last edited by maple_leaf_eh; 18-04-16 at 17:36. Reason: no photo
Reply With Quote
  #12  
Old 18-04-16, 17:51
Itzik Merkado's Avatar
Itzik Merkado Itzik Merkado is offline
Registered User
 
Join Date: Apr 2016
Location: Israel
Posts: 23
Default

Our warehouse waiting for better days
Attached Images
 
__________________
Itzik Merkado
4x6zh
Reply With Quote
  #13  
Old 07-08-16, 13:51
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

Having finally got all the Tilly photos on to a computer that is easier to load on this forum than using an Ipad it is time for an update and a few more 'before' photos.

Chris aquired over a peeriod of about four months either complete(?!) or the remains of a total of four Morris Tillys out of what we beleive was forty that came to Australia. All so far have been 'knockdown' versions with removable rooves. There was enough to complete two vehicles as detailed above. To date we have completed the rebuild of two rear axles, front axles, two sets of springs, tailshafts and steering boxes. Out of the total of about ten complete sets of front and rear springs I salvaged enough leaves to reset two complete sets. Many of the leaves were broken or had splits running lengthwise, which I had never seen before. Many hours of hammering to reset the leaves sand blasting and reassembly.
Attached Images
     
Reply With Quote
  #14  
Old 07-08-16, 13:56
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

This original vehicle had come via Hugh Davis from outback South Australia. I believe when Hugh rescued it it was upside down which may have saved alot of the sheet metal and at some stage an excavator bucket had been rested on its roof. It looks alot worse than it is with all the timber having rotted away. The initial thought was it could be rebuilt but after assessing the complete Tilly from Len Watkins the chassis of both are a bit too far gone.
Attached Thumbnails
0AB7D8A4-FAE1-43EF-BADE-335338CBBC41.jpg   01BD6B97-7948-4479-A38D-ADB97A28210C.jpg   7BD895D3-BA75-44F2-A589-908EE1C8A8B9.jpg   8DE28191-5D45-48FB-9AF3-158727C0DF22.jpg   8FAB0C7C-0904-4481-AC7E-91E00CF87CFF.jpg  

Reply With Quote
  #15  
Old 07-08-16, 13:58
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

More photos
Attached Thumbnails
12F3054D-C910-42D5-B1D3-AD59F30F5CF3.jpg   23CC0663-E915-46F8-A4F6-31484979EFC3.jpg   43D02337-654D-480C-87B8-4FAF7B84CDC7.jpg   53CA2336-05E7-4AC1-8C20-12CD3397E0EF.jpg   269E6987-472D-4B1A-9B80-F68E385270C5.jpg  

Reply With Quote
  #16  
Old 07-08-16, 14:04
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

more photos
Attached Thumbnails
8861F414-0216-44A5-BDFB-FBC9DC5D9EE0.jpg   9949D692-05C6-45F2-B0F3-83327BFDF4E7.jpg   F37506C5-3FD8-4985-938F-6807361146E4.jpg   D45EFA74-2114-48F8-A019-ED7F455B44B0.jpg   D98D02B7-923F-4643-BD8D-DFFE51D670D6.jpg  

Reply With Quote
  #17  
Old 07-08-16, 14:08
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

We were short of an engine with this original Tilly hence the lead to Len Watkins and the purchase of the complete Tilly plus the remains of a second which had a complete engine still in situ. We got the complete vehicle running, and the engine was stripped from the othe remains.
Attached Thumbnails
IMG_1212.jpg   IMG_1213.jpg   IMG_1214.jpg   IMG_1215.jpg   IMG_1217.jpg  

Reply With Quote
  #18  
Old 07-08-16, 14:12
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

As you can see I have a very robust portable workbench and overhead gantry. It was easier to lift the front hald up in the air and drop the engine out from the chassis. Bit like slaughtering a beast. That front half is not much good but wil provide a few bits and possibly some rust repair patches before its carcass hits the scrap heap.
Attached Thumbnails
IMG_1217.jpg   IMG_1218.jpg   IMG_1219.jpg   IMG_1220.jpg   IMG_1221.jpg  

Reply With Quote
  #19  
Old 07-08-16, 14:15
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

Chris was very fortunate when a bloke from West Australia contacted him via the Tilly Text magazine with the offer of the remains of the fourth Tilly that he had salvaged many years ago. It was crated up and shipped over.
Attached Thumbnails
IMG_1320.jpg   IMG_1321.jpg   IMG_1322.jpg   IMG_1323.jpg   IMG_1324.jpg  

Reply With Quote
  #20  
Old 07-08-16, 14:26
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

So after assessing what we had we decided that although the first chassis was restorable, the amount of work did not warrant it and a replacement would be a better option. We located a 1946 model car which shares the same chassis and with some modiification came be made to look identical. That is Chris posing next to what should have been his new pride and joy. Shame it was to be sacrificed as it was quite restorable itself.
Attached Thumbnails
IMG_1825.jpg   IMG_1827.jpg   IMG_1828.jpg   IMG_1829.jpg   IMG_2066.jpg  

Reply With Quote
  #21  
Old 07-08-16, 14:33
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

The Tillys share the same B pillar as the car, it is just moved back a few inches to accommodate the wider door of I think the Morris 8. The roof is the same, just chopped, folded and re-enforced with timber. The rear floor is a different panel so I had to remove that from the original and after repairing that it will be fitted. All the surplus sheet metal from the car was removed. I found that repairs had been made roughly to the rear chassis rails so that presented a problem but the rear chassis on the original Tilly seemed salvageable. Luckily Tillys are small enough to work with on a bench. Helps having a small excavotor.
Attached Thumbnails
IMG_2174.jpg   IMG_2175.jpg   IMG_2201.jpg   IMG_2202.jpg   IMG_2203.jpg  

Reply With Quote
  #22  
Old 08-08-16, 03:59
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

These photos show the rear floor layout of the Tilly showing where the sill is chopped and the B pillar located, and the main mounting point for the rear body sides. All that has to be relocated or fabricated onto the car chassis.
Attached Thumbnails
IMG_2173.jpg   IMG_2063.jpg  
Reply With Quote
  #23  
Old 08-08-16, 04:07
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

The floor panel was removed by drilling out all the spotwelds. It is pretty solid still with one small area rusted through. The rear section is badly rusted and will need to be replaced. Chris wants to tow a trailer so I will replace the rear section with some heavier 3mm sheet re-enforced so I can incorporate a stronger section to mount a tow bar.
Attached Thumbnails
IMG_2191.jpg   IMG_2216.jpg   IMG_2188.jpg   IMG_2190.jpg   IMG_2232.jpg  

Reply With Quote
  #24  
Old 08-08-16, 04:11
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

This is the sheet folded up to re-enforce the rear for the tow bar. Everything is done X 2 as both Tillys will be the same.
Attached Thumbnails
IMG_2246.jpg   IMG_2232.jpg  
Reply With Quote
  #25  
Old 08-08-16, 04:19
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

Once the floor was removed I cut off the rear chassi rails of the Tilly complete with the rear side mounting points. I then altered the floor pan of the car to match. This only required squaring off at the rear most end. A folded section was removed from the Tilly that goes under the rear to brace the end of the floor. I then cut away the outside skin of each chassis rail to the sill leaving as much of the inner section as possible.
Attached Thumbnails
IMG_2217.jpg   IMG_2214.jpg   IMG_2205.jpg   IMG_2203.jpg   IMG_2213.jpg  

Reply With Quote
  #26  
Old 08-08-16, 04:25
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

Once the unwanted material from the opposing pieces was removed I clamped them all up to see how they lined up.
Attached Thumbnails
IMG_2218.jpg   IMG_2219.jpg   IMG_2225.jpg   IMG_2226.jpg   IMG_2227.jpg  

Reply With Quote
  #27  
Old 08-08-16, 04:29
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

I am happy that this section will all go together well. I will get it all sandblasted and primed while all the pieces are open and accessable to blasting before it is reassembled. I also took the opportunilty of installing new shackle bushes in the chassis rails while they were easy to handle.
Attached Thumbnails
IMG_2230.jpg  
Reply With Quote
  #28  
Old 08-08-16, 04:36
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

As these Tillys have the removeable roof, the A pillar on the car needs cutting and fitting with plates that bolt together. I welded some braces to the pillars so the windscreen stayed in place when cut. I cut up the required sections from 2mm plate, slipped them in situ and tacked them in place.
Attached Thumbnails
IMG_2235.jpg   IMG_2255.jpg   IMG_2261.jpg  
Reply With Quote
  #29  
Old 08-08-16, 04:46
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

I removed the roof from the complete Tilly and stripped the timber from it so I could take measurements and comparisons in replicating a Tilly roof from the car roof. It was cut to length and removed from the car chassis and a 20mm fold formed up with pliers. B pillar upper sections from the damaged roof were removed and grafted onto the newly formed roof.
Attached Thumbnails
28024CCD-36B1-4DB9-9A18-8AE392417077.jpg   7F01E2BA-B919-4A96-9CDF-90C30690F7AA.jpg   ECB8A14D-CC1D-4E5A-B21C-098486CF19AB.jpg   8861F414-0216-44A5-BDFB-FBC9DC5D9EE0.jpg   3DD9D7EA-5987-46E2-A2EE-1C71C391E414.jpg  

Reply With Quote
  #30  
Old 08-08-16, 04:58
jack neville jack neville is offline
Registered User
 
Join Date: Jun 2010
Location: leopold, victoria
Posts: 1,019
Default

A couple of other modified pieces from damaged roofs were also removed to be fitted into the new roof. All the timber pieces will need to be replicated from the intact originals. Then all the pieces will be sand blasted before being reassembled. So out of four authentic Tilly rooves, plus the car roof I can salvage and complete two Tilly rooves. Next I moved onto relocating the B pillars. The car pillars are simply relocated back to accommodate a bigger door. I cut the sill around the pillar, wiggled the pillar until the internal spotwelds gave and removed the whole lot. The gap is filled with a patch just as the originals were done. I did cut the right side a bit too long so an extra patch will be required. I wil grind up the weld so it can't be seen. The rear curved section of the pillar is cut away to square it up.
Attached Thumbnails
IMG_2268.JPG   IMG_2267.JPG   IMG_2269.JPG  
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1943 Morris Commercial C8 4x4 GS project svdwal The Restoration Forum 25 13-07-15 19:54
WW2 Collins transmitter FS Mike Kelly For Sale Or Wanted 0 16-09-11 03:34
Civvy Tilly's scale-modeller The Softskin Forum 10 31-01-11 00:38
Morris-Commercial project Mike Kelly The Restoration Forum 12 18-11-10 01:02
41 morris project alleramilitaria The Softskin Forum 37 26-07-09 07:04


All times are GMT +2. The time now is 15:24.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016