MLU FORUM  

Go Back   MLU FORUM > BUY, TRADE or SELL > For Sale Or Wanted

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-16, 21:37
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 armoured car bits and pieces for sale

Hi all,

I am starting to accumulate a few parts spare from my ongoing M8 restoration which I'll list here. These parts are surplus to my restoration and may be of use to someone else. I’ve attached a photo and a brief description. Please PM me if you want additional details or photos and I’ll email them to you. I can work out the freight cost at the time. The spare 37mm gun parts I had are now all sold.

* 37mm ready rack - missing the holders for the projectile end of the 37mm round. Asking $40 US (sold, pending funds)

* Instrument panel face plate - there is some corrosion around the speedo area which will need tidying up and filling. Asking $30 USD.

* Handbrake adjusting pin- this is a little bent but should straighten fine. Asking $5 USD.

* Transmission lever housing - some areas around the base have been damaged by corrosion. Asking $40 USD.

* Light Switch - I have checked this with a multimeter and it appears to work correctly. The indicator plate has been painted over but it is restorable. Asking $20.

* Turret traverse housing - a part of this where the handle would be has been cut away. Asking $5.
Attached Thumbnails
IMG_0973.jpg   IMG_0974.jpg   IMG_0774.jpg   IMG_0865.jpg   IMG_0777.jpg  

__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car

Last edited by Big D; 08-03-16 at 09:05. Reason: Some items sold
Reply With Quote
  #2  
Old 06-03-16, 21:38
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 bits for sale

Last photo.
Attached Thumbnails
IMG_0778.jpg  
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #3  
Old 07-03-16, 06:14
jdmcm's Avatar
jdmcm jdmcm is offline
Registered User
 
Join Date: Dec 2010
Location: Surrey, BC, CDN
Posts: 672
Default

Hey Big D

I would take the 37mm Ready Rack, shipping to Surrey BC Canada, V4A2H9

Thanks
John
Reply With Quote
  #4  
Old 07-03-16, 06:56
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts

Hi John

PM sent. Just waiting to hear back from the other guy.
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #5  
Old 22-06-16, 18:29
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts for sale

Hi all,

I have these turret seats and tower mounts surplus now if anyone is looking for them.

Both towers will need to have some repair work on the base of the tower where corrosion has got to them.

The seats will need new rollers and some fabrication of the lock lever.

I'm asking $200 USD for both plus the ride there.

PM if interested please.
Attached Thumbnails
image.jpeg  
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #6  
Old 27-08-17, 16:35
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default For sale:M8 armoured car parts

Hi all,

I have a few more items which are surplus to my M8 restoration.


* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.

* Throttle master cylinder. Missing internal piston. Asking $50 USD.

* Repro co-driver seat. Unused. Asking $100 USD

* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $30 USD.

* Master on/off switch. The switch works but the whole box will need a tidy up. Asking $30 USD. A French version is included.

* Radio box - used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.

* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.

* Drag link. NOS. Asking $120 USD.

* Turret traverse knob. Asking $10 USD.

* Protectoscope box holders. Both are bent and will require a little heat and straightening. $5 USD each.

* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.

* Transmission lever housing – the top has been cutaway but is otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.

* Fan tunnels for the radiator. New reproduction. $120 USD each

* Brake backing plate. Will require some straightening. Asking $20 USD.

* Brake backing plate. Appears in good condition. Asking $40 USD.

* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.

* Brake adjustment locking plate. Asking $5 USD.

* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.

* Sponson cover. French made. Rough but repairable. Asking $20 USD.

* Grenade box. Restored and painted. Latch pin is not original. Asking $50 USD.

* 37mm rack part. Asking $10 USD.

* Transmission lever housing. Corrosion damage around the base. Asking $20 USD.

* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.

* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.

* Propellor shaft piece. Requires repair. Asking $10 USD.

* Axle grease seals. Asking $4 USD each.

* Distributor. Complete with cap. No points or condenser. Asking $50 USD.

Please PM me for more details/photos and freight estimate, or if you wish to negotiate. Payment by Paypal is okay and prices exclude the ride there.
Attached Thumbnails
IMG_0475.JPG  
Attached Images
 
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #7  
Old 15-04-18, 11:02
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts for sale

Hi all,

I have some more parts left over from my M8 restoration and have updated what is left:

* Protectoscope box holder bolt. Working well. Asking $15 USD

* IN121 insulator. NOS. Asking $15 USD

* Cable, distributor to coil with conduit. Asking $20 USD.

* Cable with conduit. Asking $20 USD.

* Armored vehicle conduit. NOS with a tag which I can't make out the writing. 9 foot long. Asking $60 USD.

* Assorted conduit. Lengths are 24", 27" and 28". Not sure what they are from. Asking $30 USD for all three.

* Steel cable tubing. This goes between the rear terminal box and the taillight wiring. Asking $15 USD.

* NOS Circuit breakers for Generator. Asking $15 USD each

* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.

* Axle grease seals. Asking $4 USD each.

* Distributor. Complete with cap. No points or condenser. Asking $50 USD.

* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.

* Throttle master cylinder. Missing internal piston. Asking $50 USD.

* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.

* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD

* Instrument panel mount for circuit breakers. Asking $10 USD

* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD

* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.

* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.

* Drag link. NOS. Asking $120 USD.

* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.

* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.

* Fan tunnels for the radiator. New reproduction. $100 USD each.

* Brake backing plate. Will require some straightening. Asking $15 USD.

* Brake backing plate. Appears in good condition. Asking $30 USD.

* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.

* Brake adjustment locking plate. Asking $5 USD.

* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.

* Sponson cover. French made. Rough but repairable. Asking $20 USD.

* 37mm rack part. Asking $10 USD.

* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.

* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.

* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.

* Propellor shaft piece. Requires repair. Asking $10 USD.


Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
Attached Thumbnails
20180415_192034.jpg   20180415_192040.jpg   20180415_192056.jpg   20180415_192117.jpg   20180415_192122.jpg  

__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #8  
Old 15-04-18, 11:03
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts for sale

More photos.
Attached Thumbnails
20180415_192326.jpg   20180415_192332.jpg   20180415_192542.jpg  
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #9  
Old 19-04-18, 15:46
BCA BCA is offline
Brian Asbury
 
Join Date: Oct 2006
Location: Ontario, Canada
Posts: 658
Default Radiator shrouds

Hello Darryl,
I spotted the "fan tunnels" for the radiator on your list. Do you mean the left and right radiator shrouds? I have the diffusers but am missing the driver side shroud for my M20 restoration. I could use a better right side shroud also.
I recall seeing you describe some parts you received from Europe and in the phots were a pair of shrouds that looked pretty good. Perhaps these are the ones you are offering?
Regards, Brian

Last edited by BCA; 19-04-18 at 20:40.
Reply With Quote
  #10  
Old 19-04-18, 21:33
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts for sale

Hi Brian

Poor choice of words on my part, sorry. I only have the one set of shrouds and I need both unfortunately.
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #11  
Old 24-05-18, 07:55
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts for sale

Hi all

Here is another wee item to add to the list. These are NOS taillight plugs for the M8 and M20 armoured car. It is NOS but I opened the pack just to confirm what they are. Am asking $12 USD plus the ride there. Postage to the US is likely to be about $10 USD. Please PM if interested.
Attached Thumbnails
20180524_155732.jpg   20180524_155750.jpg   20180524_155815.jpg  
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car

Last edited by Big D; 24-05-18 at 11:06.
Reply With Quote
  #12  
Old 28-03-20, 09:30
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 parts

Hi all,

I have some more parts left over from my M8 restoration. Asking prices are in USD, and exclude the ride there. It is a big job to photograph everything so if you are interested in something, let me know and I’ll photograph it or provide more details. I realise I am a fair way away so hopefully the prices reflect that. If you are interested in anything and want to make an offer, feel free. Note that I won’t be able to ship the goods until the end of our national COVID19 lockdown which is hopefully 3 -4 weeks away:

• .50 cal machine gun turret elevator mount. Good condition = $1200
• Hercules Oil pump repair kit = $30
• Fan pulley wheel. Good condition = $50
• Fan pulley adjuster. Good condition = $50
• Hercules NOS JXD sump gaskets = $10 each
• Fuel pump to carb NOS fittings. Part A-284086 = $3 each
• Hercules JXD oil pump repair kit = $80
• Hercules JXD oil pump idler gear. NOS = $20
• Pinion seal. NOS. Part number A-283830 = $20
• Steering sector to hull oil seal. NOS. Part number G136-6884079 = $20
• Clutch slave cylinder hose. NOS = $20
• Clutch hydraulic tube, connects flexible line to elbow in hull = $10
• Clutch pressure plate = $40
• Clutch disc = $40
• Clutch master cylinder push rod = $20
• Carburettor. Needs rebuild = $200
• Fuel pump. Needs rebuild = $150
• Fan diffusers for the radiator. New reproduction = $150 for the pair
• Radiator mounts. Original = $20 for the pair
• Fuel tank shroud end covers. Some small holes but should clean up = $20 pair
• Ignition coil = $60
• Hercules engine tappet covers = $10
• Starter motor spacer adaptor = $50
• Engine mounts. Some pitting but useable = $20 for the pair
• Distributor shaft end gear. NOS = $20
• Distributor. French made. No points, some surface rust inside. Repairable = $30
• Starter solenoid. Working = $50
• Generator repair kits. NOS = $25 each
• Generator support plate = $50
• Circuit breakers for Generator. NOS = $20 each
• Primer pump = $50
• Automatic choke = $30
• Gear shift lever = $40
• Gear shift lever rod pieces. Repro? = $30
• Gear shift lever housing. Has cutaway top = $50
• Transfer case operating levers = $10 each
• Transfer case operating lever mounting screws = $5 each
• Gear shift lever housing. Corrosion damage around base = $10
• Prism box = SOLD
• Throttle master cylinders. All for rebuild = $50 each
• Torque rod ends = $50 each
• Wheel nuts = $10 each
• Turret seat frame front mounting yoke = SOLD
• 37mm breech block cam= TBC
• 37mm breech block springs= TBC
• .30 cal belt top guide = TBC
• Gun firing cable foot mount. Base is a bit bent but useable = $25
• 37mm travel lock bracket = TBC
• 37mm bore brushes = $15 each
• 37mm/.30cal firing pedal = SOLD
• 37mm rack top= $10
• Hydrovacs and parts = TBC
• Hydrovac line to brake. NOS. Part number GAKB248….= $10
• Drag link. NOS = $120
• Shock absorber mounts = $20
• Brake backing plate. Will require some straightening = $15
• Handbrake adjusting pins = $10
• Handbrake shoe = $50
• Axle grease seals = $4 each
• Brake T connections. Well used = $5 each
• Brake backing plate. Appears in good condition = $30
• Brake slave cylinder caps, requiring restoration = $10 adjustable/$5 for fixed
• Brake adjustment locking plate= $5
• Brake shoe securing bolts with springs. Good condition= $10
• Brake master cylinder. No piston etc = $25
• Drive shafts and drive shaft connections = TBC
• Shock absorber mounting rubbers = $5 each
• Turret mechanism. Mainly complete, plus extra parts = $300
• Steel skirt for turret. 600mm long, for turret repairs = $20
• Protectoscope box holder bolt. Working well = $10
• Latch for hull/hatch visor. Looks a little rough, but works = $10
• Sponson cover. French made. Rough but repairable= $20
• Instrument panel circuit breaker backplate = $5
• Dashboard Silent blocs = $20 for set
• BC-606 Interphone box. Internals altered by a previous owner = $15
• Battery cable 40cm long. NOS = $50
• White terminal box = $30
• Tail light sockets. NOS. Part number G103-2386846 = $10 each
• Pedestal light connectors. NOS = $5 each
• IN121 insulator. NOS = $15
• HS30 earphones = TBC
• T-30 microphones = TBC
• SW-141 switches = TBC
• Radio terminal box. No lid = $10
• Steel conduit, shunt box to T connection. Bent but should straighten = $10
• Dashboard wiring harnesses. NOS = $30 each
• Speedometers = $60
• French temperature gauge. Tested and works with sender A297237 = $80
• Oil pressure gauge. NOS. Stewart Warner, Model 405356 = $80
• Assorted speedometers, ammeters, fuel, temp and oil pressure gauges = TBC

I also have pistons, bearings, valves, bellhousings, engine covers, transfer case parts etc.

Please PM if interested. Payment by Paypal is okay.
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #13  
Old 21-06-21, 21:18
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8

Hi all,

Here is an updated list of M8 and M20 parts I have left over for sale. Rather than list a price, let me know if you are interested in anything and I’ll first work out a freight price and if you are happy with that, then you can make me an offer. I’m not fussed about making money and I’d rather the stuff just gets used. I’m a long way away so I know freight is a factor.

I've attached some photos but can send more if required:

• .50 cal machine gun turret elevator mount
• Brake shoes. NOS and used.
• Map clips. NOS.
• Pedestal light locking pin. May be for H/T but works in M8.
• Brake line covers
• Clutch and brake pedal assembly
• Radio cable tube/conduit
• Voltage regulator. Not working.
• Exhaust header. Needs repair.
• Sponson plates
• Gearshift selector rod.
• 37mm and .30 cal cable mount for seat frame.
• .50 cal gun barrel turret support
• Front engine mount cushions. Rough.
• Front engine mount cushion retainers. Rough.
• Rear engine steel mounts. Rough but repairable
• Oil can bracket. Original
• Throttle salve cylinder mount. Repro.
• Master switch front.
• Throttle reservoir.
• Front axle brake guard.
• Shock absorber mounts.
• Black out light mount. Repro.
• Parking brake and parts
• Hercules Oil pump repair kit
• Fan pulley wheel and adjuster casting
• Fuel pump to carb NOS fittings. Part A-284086.
• Hercules NOS JXD (?) oil pump idler gear
• Pinion seal. NOS. Part number A-283830.
• Carburettor. Needs rebuild.
• Fuel tank enclosure (x2)
• Fuel tank mounts. Originals.
• Ignition coil
• Hercules engine tappet covers
• Distributor shaft end gear
• Distributor. French made. No points, some surface rust inside. Repairable
• Circuit breakers for Generator. NOS
• Primer pump
• Gear shift lever rod pieces. Repro?
• Gear shift lever housings. Both are rough
• Transfer case operating levers
• Transfer case operating lever mounting screws
• Throttle master cylinders. All for rebuild
• Clutch slave cylinders. All for rebuild
• Torque rod ends
• Wheel nuts
• .30 cal belt top guide
• Gun firing cable foot mount. Base is a bit bent but useable.
• 37mm travel lock bracket = TBC
• 37mm rack top
• Hydrovacs and parts
• Drag link. NOS
• Rubber shock absorber mounts
• Brake backing plates. Will require straightening
• Handbrake adjusting pins
• Handbrake shoe
• Axle grease seals
• Brake T connections. Used
• Brake wheel cylinders. Requiring restoration
• Brake wheel cylinder caps. Requiring restoration
• Brake adjustment locking plate
• Brake shoe securing bolts with springs.
• Brake master cylinder. No piston
• Turret mechanism. Mainly complete, plus extra parts
• Steel skirt for turret. 600mm long, for turret repairs
• Protectoscope box holder bolt. Working well
• Latch for hull/hatch visor. Looks a little rough, but works
• Sponson cover. French made. Rough but repairable
• Instrument panel circuit breaker backplate
• Dashboard Silent blocs
• Steel conduit, shunt box to T connection. Bent but should straighten
• Dashboard wiring harnesses. NOS
• Speedometer
• French temperature gauge. Tested and works with sender A297237 = $80
• Oil pressure gauge. NOS. Stewart Warner, Model 405356 = $80

Please PM if interested.
Attached Thumbnails
20210603_142829.jpg   20210603_142836.jpg   20210603_142844.jpg   20210603_142852.jpg   20210603_142857.jpg  

__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #14  
Old 21-06-21, 21:18
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8

More photos.
Attached Thumbnails
20210603_142901.jpg   20210603_142906.jpg   20210603_142910.jpg   20210603_142916.jpg   20210620_142554.jpg  

__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #15  
Old 21-06-21, 21:19
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8

And again...
Attached Thumbnails
20210620_142559.jpg   20210620_142604.jpg   20210620_142615.jpg   20210620_142621.jpg  
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
  #16  
Old 25-06-22, 04:08
Big D Big D is offline
Darryl
 
Join Date: May 2008
Location: Dunedin, New Zealand
Posts: 653
Default M8 and M20

Hi all,

Here is an updated list of M8 and M20 parts I have left over for sale. Rather than list a price, let me know if you are interested in anything and I’ll first work out a freight price and if you are happy with that, then you can make me an offer. I’m not fussed about making money and I’d rather the stuff just gets used. I’m a long way away so I know freight is a factor.

• Flywheel/clutch housing
• Map clips. NOS.
• Countershaft gearset. NOS
• M8 turret seats. Will need work.
• Side locker lids. Good condition.
• Oil can bracket. Original
• Wheel drums. Good condition
• Wheel hubs. Good condition
• .50 cal machine gun turret elevator mount
• Clutch and brake pedal assembly
• Radio cable tube/conduit
• Voltage regulator. Not working.
• Exhaust header. Needs repair.
• Sponson plates
• Gearshift selector rod.
• 37mm and .30 cal cable mount for seat frame.
• .50 cal gun barrel turret support
• Front engine mount cushions. Rough.
• Front engine mount cushion retainers. Rough.
• Rear engine steel mounts. Rough but repairable
• Throttle slave cylinder mount. Repro.
• Master switch front.
• Throttle reservoir.
• Front axle brake guard.
• Shock absorber mounts.
• Black out light mount. Repro.
• Hercules Oil pump repair kit
• Fan pulley wheel and adjuster casting
• Fuel pump to carb NOS fittings. Part A-284086.
• Hercules NOS JXD (?) oil pump idler gear
• Pinion seal. NOS. Part number A-283830.
• Fuel tank enclosure (x2)
• Fuel tank mounts. Originals.
• Ignition coil
• Hercules engine tappet covers
• Distributor shaft end gear
• Distributor. French made. No points, some surface rust inside. Repairable
• Circuit breakers for Generator. NOS
• Primer pump
• Gear shift lever rod pieces. Repro?
• Gear shift lever housings. Both are rough
• Transfer case operating levers
• Transfer case operating lever mounting screws
• Throttle master cylinders. All for rebuild
• Clutch slave cylinders. All for rebuild
• Torque rod ends
• Wheel nuts
• .30 cal belt top guide
• Gun firing cable foot mount. Base is a bit bent but useable.
• 37mm rack top
• Hydrovacs and parts
• Drag link. NOS
• Rubber shock absorber mounts
• Brake backing plates. Will require straightening
• Handbrake adjusting pins
• Handbrake shoe
• Parking brake (handbrake) handle and parts
• Axle grease seals
• Brake shoes. NOS and used.
• Brake line covers
• Brake T connections. Used
• Brake wheel cylinders. Requiring restoration
• Brake wheel cylinder caps. Requiring restoration
• Brake adjustment locking plate
• Brake shoe securing bolts with springs.
• Brake master cylinder. No piston
• Turret traverse mechanism. Mainly complete
• Steel skirt for turret. 600mm long, for turret repairs
• Protectoscope box holder bolt. Working well
• Latch for hull/hatch visor. Looks a little rough, but works
• Sponson lower cover. French made. Rough but repairable
• Sponson lower cover. French made. Painted.
• Instrument panel circuit breaker backplate
• Dashboard Silent blocs
• Steel conduit, shunt box to T connection. Bent but should straighten
• Dashboard wiring harnesses. NOS
• Speedometer
• French temperature gauge. Tested and works with sender A297237
• Oil pressure gauge. NOS. Stewart Warner, Model 405356

I also have Hercules pistons, bearings, valves.

Please PM if interested.
__________________
Cheers,

Darryl Lennane

1943 Willys MB
1941 Willys MBT Trailer
1941 Australian LP2A Machine Gun Carrier
1943 White M3A1AOP Scout Car
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: lp2a carrier bits and pieces Darren Eastwood For Sale Or Wanted 0 04-03-16 05:25
More bits and pieces to get rid off Michael Greeley The Carrier Forum 2 25-08-11 01:45
Some CMP bits and pieces I need cmperry4 For Sale Or Wanted 0 20-05-09 22:52
Bits and pieces help Jordan Baker The Carrier Forum 8 13-04-06 05:07
looking for a few bits and pieces BIG MIKE The Carrier Forum 0 23-12-05 03:36


All times are GMT +2. The time now is 11:14.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016