|
#1
|
||||
|
||||
WTB: a single antenna wire with plug on the end for the WS No.19
I have the antenna base but am missing the wire and coax connector to the No. 19 WS to finish my Staghound radio installation in the turret.
Anyone? Call Dan 505-269-2056 |
#2
|
|||
|
|||
Hello Dan.
Are you referring to the coax cable running from the A-set plug on the front right of the set to the side of the Variometer? It has a right angle Pye Connector either end. David |
#3
|
|||
|
|||
Quote:
The Sherman or Grizzly installation kit will list all the aerial parts required. Chris. |
#4
|
||||
|
||||
antenna lcoations and cable issue
Chris: thanks for that......I am assuming that the variometer attaches to the bottom of the aerial feeder No. 4 (the pyramid shaped one). I guess I was under the mistaken belief that there was a cable from the bottom of the No.4 to the variometer and then one from the variometer to the front of the No. 19 set. I have the cable and antenna mount for the other side (one with the inverted protector around the base of the antenna mount).
I'VE SEEN A FEW PICTURES BUT NO ONE IT SEEMS GETS BACK INTO THE INNER RECESSES OF THE TURRET BUSTLE AND PHOTOS THE LAYOUT BEHIND THE No. 19 SET WHICH IS IN FRONT OF ALL THOSE CONNECTIONS!!!!! I think I have the cable attaching to the variometer that plugs into the front ofthe No. 19 set. |
#5
|
|||
|
|||
Quote:
If the hole in the roof is much too large for the aerial feeder, it was drilled for a U.S. aerial base and you need a centering washer plus a spring washer to cover the hole from the inside. Cable from 'A' set to variometer is "Leads, Aerial, No.1" and has two right-angled connectors. The one for the 'B' set to Aerial Base No.9 is "Leads, Aerial, No.2" and has a right-angle connector for the set end and an in-line one to connect to the bottom of the aerial base - the clip on the base should be a 'horse shoe' shape, but sometimes they come with the wrong type. You will also probably need to change the position of the variometer front section so that you can read the scale when it's in position - this needs to happen before fitting it! Hope this is some help. Chris. |
#6
|
||||
|
||||
anywhere where I can find a picture of the fittings??? They are worth a 1000 words so they say - probably 3,000 to me!!! LOL
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Variometer wire to antenna | James D Teel II | The Wireless Forum | 10 | 25-09-19 20:26 |
Connector, Single, No3; ZA2270 | James D Teel II | The Wireless Forum | 2 | 31-08-19 19:54 |
PLUGS, Aerial, Single No. C1 (ZA/CAN 1480) | David Dunlop | The Wireless Forum | 10 | 27-08-19 06:44 |
For Sale: M274 mule Spark Plug Wire Set | Richard Whelan | For Sale Or Wanted | 2 | 30-04-19 13:48 |
Iltis single installation conversion kit 81-041A | chris vickery | For Sale Or Wanted | 0 | 22-01-12 19:45 |