#1
|
|||
|
|||
Chev 216 oil filter gasket
What is everyone doing to replace that cork gasket on the (earlier) 216 oil filter housing? It doesn't come with the filter's I've bought and definitely leaks. Apart from buying a sheet of nitrile rubber and making one, is there a good option? Like a currently available part from something else? Can you buy 'flat' O-rings? Or has someone made an O-ring work?
|
#2
|
|||
|
|||
Which # filters are you buying?
Hi Harry
Couple of years ago the company that makes many of this type of filter stopped putting the two different gaskets in the cartons, somebodies idea of cost savings. Well the problem was pointed out to someone higher in the company and they started putting both in the package again. But there are a whole lot of the filters out there in the system with only one gasket. I will track down which company and which numbers and get back to you. I'll also look to see if I have any extra new one to get you started. My local NAPA guy was actually able to get me the newer filter with two different gaskets. The earlier CMP filter assembly takes a NAPA 1001 and the later larger filter is 1503. I'll be back with more information. Back with more information OK just checked the NAPA computer system at my local dealer, they are showing that NAPA 1001 and 1503 filters both should come with both gaskets, NAPA filters are made by Wix checked the Wix web site and it shows 1001 with two gaskets http://www.wixfilters.com/Lookup/Par...spx?Part=51001 as does the http://www.wixfilters.com/Lookup/Par...spx?Part=51503. Wix home page is http://www.wixfilters.com/ useful site as it has all the measurements for the filter as well. Word of caution on ordering the Wix # 51001 filter the number is used both for cartridge type and spin on type. So when ordering be sure they know which type. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com Last edited by Phil Waterman; 11-03-14 at 18:11. Reason: Added information |
#3
|
|||
|
|||
Mil Jr Filters
I recently bought some filters for my M38A1 . They were Wix 51006 and had two gaskets. One fit perfect.
Bob |
#4
|
|||
|
|||
Thanks Phil, that's a good start. Can't get Napa or Wicks stuff here but I should be able to find a cross over with someone like Baldwin or Fleetguard. Would love a spare seal if you had one... Let me know postage cost (in the $5 I guess)
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gasket clamp | Dave Schindel | The Carrier Forum | 4 | 07-02-12 06:43 |
Gasket kits | c dressel | The Carrier Forum | 6 | 04-12-10 22:41 |
Gasket patterns | Keith Webb | The Restoration Forum | 1 | 27-02-09 15:20 |
Gasket question | Jordan Baker | The Restoration Forum | 6 | 26-12-05 03:57 |
Gasket Trick | Phil Waterman | The Restoration Forum | 7 | 23-11-04 22:51 |