#1
|
|||
|
|||
19-Set/Clansman/Larkspur Adapter
Somewhere on the net in the last couple of weeks, I ran across a reference to one of these, with a very fuzzy picture and I cannot, for the life of me retrace where I ran across it. Thought I would toss it out here in case somebody recognizes the details and can perhaps provide more information.
What the item appeared to be was a 6 or 8 inch long heavy rubber cable. One end was fitted with a standard 12-pin 19-Set Cable Connector. The opposite end had a female 6-pin Clansman/Larkspur Headset Receptacle fitted. From what I understood from the article, by fitting this adapter to a 19-Set Control Box, the Clansman/Larkspur Commanders Headset could be connected and be fully functional within the 19-Set System. I am guessing this adapter was most likely in use during the transition years, when the 19-Set equipment was being phased out and the newer Clansman/Larkspur equipment phased in. I know in the early 1960's, the Canadian Army had a version of the M37/42 Signals Van in their inventory that was equipped with a 19-Set and a C42 Set, which would be an ideal environment for one of these adapters. What crosses my mind now is whether or not these adapters would have been a limited run special order item that was contracted for, or if the design came into being as a field mod on an 'as needed' basis. David |
#2
|
|||
|
|||
Quote:
Cables I have seen: Short 2-pin male Pattern 104 to Pye 6 pin socket. (WS19 power from later power distribution box). Long 12 pin Pattern 104 to Pye 12-pin socket (WS19 into Larkspur harness) Bracket with Pye 12-pin plug to something I've forgotten (to fit a C12 into a WS19 harness). 6-pin Pattern 104 (I think) to Connector 5-pt (drop lead) Mic/Headset connector for C12. (Only allows a single user, so presumably training, etc. There may well be other variations in circulation, but these were standard items for various applications. Chris. |
#3
|
|||
|
|||
It was on Ebay a couple of weeks ago. P/N Z1/ZA47960
http://www.ebay.co.uk/itm/WIRELESS-S...p2047675.l2557 |
#4
|
|||
|
|||
Thanks for posting that, Bruce. It isn't the bit I spotted on the web earlier, but is definitely the same piece of equipment. Interesting to know it was a production item. It also solves a mystery lurking in my odds and sods bin for several decades. I will do some rummaging this evening and see if I can post some pictures to explain it all.
You and Chris do realize, of course, your information has very likely put me on a quest for two more fiddly bits for my 19-Sets that will literally tie in quite nicely now with my C42 as well. Cheers for now, David |
#5
|
|||
|
|||
Glad to help a fellow 'yless collector.
I had to sell my M152CDN sigs van prior to moving here. It was equipped with a WS19 and two C42 sets in rebroadcast mode. I did keep a C11/R210 set but I think Chris owns it now. |
#6
|
|||
|
|||
Quote:
Chris. |
#7
|
|||
|
|||
Rats! I cannot locate it at the moment, but back in the 80's I received a box of C42 Cables and bits from a benevolent Corporal at a local armoury while chatting to him about Southwind Heater installations for the M38CDN. Tucked into the box of stuff was a late model 12-pin Pye connector identical to the one in the eBay ad, but the rubber cable had been chopped at the base of the connector and just a short bunch of plastic covered wires were sticking out. Seemed odd to find a 19-Set bit of kit in with C42 parts and I dismissed it and tossed the connector into a spares bin. The plastic wire loom colours in the eBay ad are identical to those in the connector I have misplaced, but it seems to support these particular adaptor cables were in the Cdn Army Supply System at one time. The only cables I have seen for the C42 12-pin connector are 90 degree elbow types. Seems I will have to keep an eye out for this cable with inline connectors and use the appropriate end and section of cable to reconstruct one of these adaptors. I suspect once the 19-Sets were out of the picture, these adapters became redundant and somebody wagged the C42 end as a spare, tossing the Pye end.
David |
#8
|
|||
|
|||
While I am at it. In the course of trying to find the original web article that started all this, I ran across the attached 19-Set/Clansman/Larkspur adapter that looks as if it is intended to allow 19-Set headsets to be connected to the later FM radio systems.
Probably the other one I need to start looking for... David |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: Clansman vehicle headsets | Jon Bradshaw | For Sale Or Wanted | 1 | 20-09-14 11:23 |
WTS - Misc Larkspur and post war Brit EIS | 4b1t | For Sale Or Wanted | 16 | 07-01-12 02:47 |
Wanted: LARKSPUR battery box | Mike Kelly | For Sale Or Wanted | 5 | 05-05-11 06:47 |
Wanted: Larkspur radio bits C42 C13 | Mike Kelly | For Sale Or Wanted | 3 | 15-03-11 02:57 |
Clansman | Jon Skagfeld | WW2 Military History & Equipment | 2 | 22-12-03 00:31 |