|
#1
|
||||
|
||||
Sandblasting cabinet
I figured I needed a place to sandblast where I could contain the sand so I modified this old water tank that blew out of the truck one day and split open. The second time I used the sand it got so dusty in there that I couldn't see what I was doing. I put a 220 volt ventilation fan out of a barn in the filler hole and added the piece of ducting to blow the dust outside. I also added a couple of 300 watt lights. Now I could see what I was doing and am in clean air when blasting.
One thing about containing the sand, every cat on the farm wants to use it as a litter box. I rigged up that screening box and put it against the side of the tank. I'm putting a hopper on the inside of the tank so you scoop the used sand into the hopper and it runs down over the screen. Now I can keep the cats out of the sand. That screen thingy is something out of the oilfield that I picked up at the dump. It's a fairly heavy plastic grid with stainless screen on one side and works like it was made for the job. The fan moves enough air that all the fine dust goes out the door so I can reuse the sand a number of times.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#2
|
||||
|
||||
Cat Problem
You could always just rig it to turn on the lights and the fan the moment a cat walks in - might take you days to find the cat again but I guarantee it won't be back!
Of course, the word might get out in the local kitteh kommuniteh that there's a price on your head... lotsa sharp fings out there.... Nice work, though!
__________________
SUNRAY SENDS AND ENDS :remember :support |
#3
|
|||
|
|||
air volume, and media containment
Hi David,
Great thinking and great work! Just wondering how many cfm your compressor puts out to run your rig? Also I've heard of people connecting 1 or more compressors airlines together to get the required volume on a job. I've seen blasting done in a sea container. And I've heard of someone making a blast cabinet out of an old fridge that still had good magnetic door seals. But dust extraction and lighting and your health are the next problems as David touched on. Garnet is 'meant' to allegedly be non-toxic (how many decades will it take to really tell - like mobile phones) where as common as muck silica sand could give you a permanent dose of silicosis. Stay Safe Regards Alex Last edited by cantankrs; 20-03-09 at 12:42. Reason: replaced 'generations' with 'decades' - generations was bad word choice |
#4
|
||||
|
||||
Alex,
I've got a 5 hp and a 3 hp compressor hooked together to run the blaster and they'll just keep up at 100 psi. I've got a 4 cylinder one with a 7.5 hp motor but haven't got it running yet. Getting rid of the dust when blasting is very important. Even if you had grit that wasn't dangerous, I can't imagine the fine paint and rust dust would do your lungs any good. I wear coveralls, a breathing dust filter, ear plugs, and a sandblasting hood with replaceable Plexiglas lens. With that fan on the cabinet I'm working in clean air, but you can still get the stuff blowing towards your face when it bounces off the work. When I need to blast something that won't fit in the tank I do it outside with the used sand and just let it go. I bought $130 worth of sand and used about $100 of it blasting the four wheels for my C8 so you can see why I need to reuse it as many times as possible. With the cabinet I might be able to use river sand instead of bought stuff as the dirt won't be such a problem.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#5
|
|||
|
|||
bead blasting plastic media
Over on canadiangunnutz last month there was some discussion of using plastic beads for blasting gun parts. The guys using it were in Edmonton and found a big-time industrial supplier who sells it by the fifty-pound bag.
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
#6
|
|||
|
|||
Thanks David, Good info.
Alex |
|
|