#1
|
||||
|
||||
Veh tac signs...post war
Let me list three assumptions below so that I can stand corrected if one or any are wrong.
I'm posting about SMP veh tac signs specifically during the 1970s/1980s. Assumption No 1: That factory painted SMPs on a static unit's DA would have stencils in white.(i.e. ECC, C/S, TP) Assumption No 2: That an SMP VMOd to a field unit, after having 2 or 3 coloured cam paint applied, would have black stencilling. Assumption No 3: That a static unit's SMP wouldn't/shouldn't have black stencilling, and, conversely, that a field unit's SMP wouldn't/shouldn't have white stencilling.
__________________
PRONTO SENDS |
#2
|
|||
|
|||
Vehicle markings
Hello Jon
To support your assumptions. From what i have in documentation, vehicle markings 1957/1962, which i understood covered up to the camouflage pattern. gloss green vehicles. Unit Sign, The unit title in a coloured rectangle was in black. The other vehicle markings as you indicated were in white. CFR on yellow painted vehicle in black. on all other vehicles white. bridge class, yellow circle with black number Canada markings, was a gold mple leaf on a formation sign but later changed to Canada Flag. Tire Pressure White on the inside of the cab in a prominent location, if not already shown on a plate by the manufacture. Later when the Canadian Forces logo came out the larger vehicles had these on the doors, inluding SMP's. Camo pattern It is my understanding that low visibility markings were used when the Camouflage was introduced. That is flat black paint. The only exception was the red and white Canadian flag which is still in use today. (But some vehicles have the black and green version.) I am not aware of the 80's Camouflage pattern having white markings. Exceptions Some M series vehicles were never painted Camouflage and still sported their gloss green. Some of these did have the low visibility markings on them. Some of the earlier camouflage patterns did sport the earlier markings. I hope that this helps and i am sure somebody else will post info, which we are missing. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc. |
#3
|
||||
|
||||
Quote:
Scotty
__________________
Gone but never forgotten: Sgt Shane Stachnik, Killed in Action on 3 Sept 2006, Panjwaii Afghanistan |
#4
|
||||
|
||||
These photos were sent to me by someone from another Forum. The caption is as follows: In 1978, a Recce Troop from the Windsor Regiment was flown over to Lahr on a call-out to serve as the RHQ Recce Troop for the RCD. At that time, the RCD did not keep a Call Sign "60" on a regular basis. As a result, we had to draw our Jeeps from a couple of different sources. Some were from war storage, and others were signed over by the Sqn OCs and the COs personal rover. Therefore the Tac Signs were painted over and the Call Signs painted on by us. CFRs were stenciled onto the front and rear bumpers, so CFR plates were not attached. In this case, these M151A2s all have the 3 Color Cam Pattern, but yet the ECC is clearly painted on in white. Goes to show ya, rules were all written in pudding |
#5
|
|||
|
|||
Markings
Hello Scotty
I knew somebody had some more info to add. It looks like the white CFR on the front bumper followed the British and US tradition of not having licence plates. Odd considering we did use the DND plate overseas as well and even provincial plates when they were issued. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc. |
|
|