MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 29-01-17, 01:48
Craig McKelvie Craig McKelvie is offline
Registered User
 
Join Date: Aug 2010
Location: Windsor, Canada
Posts: 5
Default '44 Chevy CMP C15 Master Cylinder

Has anyone successfully found a rebuild kit for a Chevy C15 brake master cylinder? (Preferably in Canada) Mine is leaking from the rubber dust boot end and assuming it will need new piston cups.
Reply With Quote
  #2  
Old 29-01-17, 04:03
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

If you don't think it is safe to drive now (and I think you are right to be concerned) you could take it out of the truck, plug the lines, disassemble the master and inspect whether the cylinder is pitted. If it is pitted, you will probably have better luck getting it sleeved and rebuilt/remanufactured by someone like John Stuart http://www.johnstuartpowerbrake.com/...-Sleeving.page in Stoney Creek. A new kit put into a pitted cylinder will wear and leak much sooner than new seals in a good bore. The master used in most of the Chev CMPs is a pattern that isn't readily available. Similar looking style exist, but not in the needed 1-1/4" size.
If only a kit is needed, this auction has ended on ebay but the seller regularly has CMP parts.
Based on a quite comprehensive Wagner Brake Catalog HU-400 dated September 1947, the master cylinder used on CMPs is probably a FD-4388 in "Wagner speak" based on shape, mounting pattern and bore. If this is correct, it is listed as taking a Wagner FC-3630 kit. The FC-3630 number in turn goes back to GM part number 603646, which is one of the repair kit numbers given in the C15A parts list. I don't know what the difference between this kit and the ones listed as superceding it are. GM part number 5450260 doesn't appear in the Wagner cross-Index, but it isn't one of the "unique to CMP" part numbers according to the parts list.
The FD-4388 seems to have been used in some GMC trucks late 30s to mid 40s.
Reply With Quote
  #3  
Old 29-01-17, 07:01
cletrac (RIP)'s Avatar
cletrac (RIP) cletrac (RIP) is offline
David Pope
 
Join Date: Jul 2003
Location: Eston, Sask, Canada
Posts: 2,251
Default

Farm oriented auto parts stores quite often have stuff for 40s trucks that will work. I got a kit from Great West Auto Electric in Swift Current a few years ago. They even had wheel cylinder kits on the shelves.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
Reply With Quote
  #4  
Old 29-01-17, 10:14
Maurice Donckers Maurice Donckers is offline
Registered User
 
Join Date: Feb 2004
Location: Beek Holland
Posts: 403
Default

Dodge WC series have the same rebuilt kit , it is just a standard 1 1/4 kit .
Reply With Quote
  #5  
Old 29-01-17, 10:27
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

Another source that might help you are long established heavy truck repair shops, probably better if they are independent - not a dealer, that make their living by keeping customers trucks on the road, not selling new ones. Avoid anywhere like Canadian Tire where the kid at the counter can't even sell you a 12V 7" sealed beam headlight bulb without knowing what vehicle it fits to find the stock number in his computer.

You probably already know that the wheel cylinders are as used on Ford trucks of the period (and probably others too) and are still readily available new. Ford master cylinders are also still available new. New replacement and NOS Chev master cylinders are rare (even used ones on ebay are rare, but the master for early C60X are a whole different breed of rare. I have never seen a new or NOS of that style. They may exist, just I've never seen one that wasn't already on a truck and I've seen cases where they were neatly robbed from the C60Xto keep something else running. I suggest to folks that any CMP Chev master cylinders, safe to use or not, that aren't already on trucks be saved unless the casting has failed beyond the ability to repair by sleeving.
I agree with Maurice that in that period, parts were less vehicle specific. For a small production vehicle like the C60X, you don't design a new part if something already in production by one of your suppliers can do the job.
The Wagner catalog I referred to did list the same repair kit for several different master cylinder housings but all were GM.
Reply With Quote
  #6  
Old 29-01-17, 20:10
Harry Moon Harry Moon is offline
Registered User
 
Join Date: Feb 2003
Location: Burnaby B.C. Canada
Posts: 1,091
Default Chev's of the 40's have them

I bought the one that was new manufacture, Argentina, and it was off by a couple mm's as it was obviously manufactured to metric specs, took some work to install on the C60. I would buy the rebuild that requires a core.
Reply With Quote
  #7  
Old 29-01-17, 20:37
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

Quote:
Originally Posted by Grant Bowker View Post
Avoid anywhere like Canadian Tire where the kid at the counter can't even sell you a 12V 7" sealed beam headlight bulb without knowing what vehicle it fits to find the stock number in his computer.
He will also need to know the engine size before he can look anything up for you, as if that would make a difference on the majority of body parts.

A good parts counterman has to have some years of experience, and should not give you a puzzled look when you ask for something like a vacuum advance.
Reply With Quote
  #8  
Old 29-01-17, 21:01
cletrac (RIP)'s Avatar
cletrac (RIP) cletrac (RIP) is offline
David Pope
 
Join Date: Jul 2003
Location: Eston, Sask, Canada
Posts: 2,251
Default

Like I told my daughter, when you go to a parts store, Always ask for the OLD GUY!
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
Reply With Quote
  #9  
Old 30-01-17, 02:40
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

Quote:
Originally Posted by Harry Moon View Post
I bought the one that was new manufacture, Argentina, and it was off by a couple mm's as it was obviously manufactured to metric specs, took some work to install on the C60. I would buy the rebuild that requires a core.
My C60 manual says the master cylinder assembly is part # 5450260 (same as the C15A). The only master cylinder I see today at Chevs of the 40s that looks to be the same general shape as CMP master is part # 5450257, listed as fitting cars. I thought most cars and pickups had 7/8" or 1" master cylinders rather than the 1-1/4 usually found on CMPs.

Is more information available about you got and how close it was to the CMP master cylinder?

Chevs of the 40s do sell kits, but todays catalog seemed to be for 7/8 or 1" master cylinders.
Reply With Quote
  #10  
Old 30-01-17, 15:56
Craig McKelvie Craig McKelvie is offline
Registered User
 
Join Date: Aug 2010
Location: Windsor, Canada
Posts: 5
Default

thanks everyone, going with Grant's suggestion and sending to John Stuart in Stoney Creek. Try a fresh start.

Always wonderful help from the forum!!!
Reply With Quote
  #11  
Old 01-08-17, 17:35
Harry Moon Harry Moon is offline
Registered User
 
Join Date: Feb 2003
Location: Burnaby B.C. Canada
Posts: 1,091
Default follow up

Quote:
Originally Posted by Harry Moon View Post
I bought the one that was new manufacture, Argentina, and it was off by a couple mm's as it was obviously manufactured to metric specs, took some work to install on the C60. I would buy the rebuild that requires a core.
A follow up on this master cylinder. It failed before I got on the road. There is a outlet at the end for the brake sensor and when you rotate the push rod to install or adjust the seal cuts itself on that opening. no way to avoid rotating the push rod. in addition it is a one inch bore which required a longer stroke or travel to the pedal. seemed to work fine but after adjusting it it started to fail. I recall the same damage to a similar later master cylinder adapted to another truck, same 1 1/4 master with the mounting holes on the side and I think back then the culprit was the same outlet on the side ripping the seal when it was being adjusted. So I have taken Grants suggestion and sent an original one off to Stoney Plain for sleeving and a Rebuild.
Reply With Quote
  #12  
Old 01-08-17, 19:25
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Photos Please

Hi Guys

Some photos of the master cylinder unit preferably with a original in the picture would help others understand the issue.

Would also be interested in the dimension of the bore casting, just wondering if the casting between the larger and smaller bore are the same? Wonder if there is enough metal in the walls to bore for the larger size?

My solution has been to have the original cylinders sleeved this has been a once and done solutions with sleeved master and wheel cylinders lasting 30+ years. With just replacement of the rubber parts every 5-7 years.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote
  #13  
Old 02-08-17, 23:32
Andrew H. Andrew H. is offline
Registered User
 
Join Date: Dec 2010
Location: New Zealand
Posts: 200
Default

Quote:
Originally Posted by Phil Waterman View Post
Hi Guys,Some photos of the master cylinder unit preferably with a original in the picture would help others understand the issue. Cheers Phil
Here is an original master cylinder from a 1942-45 civilian Chev truck.
Attached Thumbnails
1942-45 Chev master cylinder (R).jpg  
Reply With Quote
  #14  
Old 03-08-17, 02:14
cletrac (RIP)'s Avatar
cletrac (RIP) cletrac (RIP) is offline
David Pope
 
Join Date: Jul 2003
Location: Eston, Sask, Canada
Posts: 2,251
Default

I bought a NOS military master cylinder off ebay several years ago. The guy didn't know the difference between it and the civilian ones. The civvy ones have the bolts going in from the side and the CMP ones go up from the bottom.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
Reply With Quote
  #15  
Old 03-08-17, 09:24
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Barry Churcher made a bracket to fit the more common master cylinder to a CMP. May be a solution for others as well.

HTH,
Hanno
Reply With Quote
  #16  
Old 03-08-17, 20:56
Jonathan Moore's Avatar
Jonathan Moore Jonathan Moore is offline
Registered User
 
Join Date: Aug 2012
Location: mid wales britain
Posts: 505
Default

I had the same problem with my HUP, I did think about having the master cylinder it lined but in the end I bought a new one fro Rockauto in the US. Its slightly different in that it has two bolt holes that go through the chassis and you need to make a couple of spacers but mine already had the holes. The part number is MCA4555.

Jon
__________________
1950 Land Rover series 1
1967 Land Rover series 2A LWB
1986 Land Rover series 3 SWB
1938 DKW SB200
1944 DKW NZ350-1
1967 Ural K750 sidecar outfit
1944 VW Kubelwagen KDF82
1942 Steyr 1500A
1944 Morris C8A
1943 Chevrolet CMP8A HUP?
194? Bedford QL
Reply With Quote
  #17  
Old 06-08-18, 23:32
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,285
Default

Comments on installing kits to sleeved master cylinders http://www.mapleleafup.net/forums/sh...780#post252780
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford Master Cylinder Phil Waterman Parts/Sources/Prices 5 27-09-15 13:36
C60X Master Cylinder rebuild kit Gunner Parts/Sources/Prices 10 27-02-11 16:10
Master cylinder check and top up OttawaValleyGuy Post-war Military Vehicles 3 11-11-10 10:49
Chevrolet Master Cylinder picture Ganmain Tony Parts/Sources/Prices 9 10-06-10 20:40
Ford Master Cylinder Eric Szalanda Parts/Sources/Prices 1 03-08-09 11:55


All times are GMT +2. The time now is 21:17.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016