#1
|
||||
|
||||
HUP half shafts
In May I thought that I had finally had a road worthy HUP and my son and I took it for a test drive. 100yrds down the road there's a bang and we loose drive. I engaged the front axle and had drive, so I knew it was either a diff or more likely a half shaft as I have suffered that problem with land rovers. After stripping it all down I found that the long rear half shaft had broken, in fact it had been broken previously and had been bodged and the ground out to hide the repair. I assume that this had been done to sell the vehicle because the repair wouldn't last long. So the hunt began for a new one. It seemed that there was no chance of finding one, so I decided to have one made. After some hunting I found a couple of companies that could manufacture one, the nearest being a company could Rakeway engineering. All seemed well and they quoted me a maximum turn round of 8 weeks. I left it 10 weeks and rang to see if I could collect the shafts only to be told by the owner that they hadn't even looked at them and, these are his words, "that if I rang back in 2 weeks if he could be bothered he might have a look at them". So the next morning I picked the shafts up and took them the another company GB Engineering. It has taken some time and I have missed the summer but eventually I have a set of new shafts.
Jon
__________________
1950 Land Rover series 1 1967 Land Rover series 2A LWB 1986 Land Rover series 3 SWB 1938 DKW SB200 1944 DKW NZ350-1 1967 Ural K750 sidecar outfit 1944 VW Kubelwagen KDF82 1942 Steyr 1500A 1944 Morris C8A 1943 Chevrolet CMP8A HUP? 194? Bedford QL |
#2
|
||||
|
||||
shaft
A club member here had a similar problem, in his case the vehicle was a ex NZ army C8AX. The front axle was the issue. Len found a C15A front axle half shaft and an engineering shop shortened the shaft and re-splined the end.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#3
|
|||
|
|||
Good job finding someone who could make both sides
Hi Johnathan
Does the company that made your axle have and a web site if so please share it with us as a starting point for anybody else who discover they need an axle. Having a pair made was a very smart idea, over the years I broke both rear axle sides, first being the long side, with help of many friends on MLU a used shaft was found to get my HUP back on the road. Couple of years later the short side snapped. That time no used shaft could be found. So like you I started looking for a company that could make a new one company located in Colorado, US Mark Williams, just check they are still in business. http://www.markwilliams.com/ I share them as a resourse, 2005 they were very good to work with. At the time they did my short side shaft I asked about having a long side shaft made and they could not make the long side because they didn't have a heat treating oven large enough to handle the length. They make axles for racing and other high power applications. Glad to hear your HUP is back to moving under rear wheel drive again. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#4
|
||||
|
||||
Here you go Phil http://berrisford.co.uk/index.php/ As with your contact they do race buggies and components but I am told, will do anything really and although I don't usually recommend companies this one keeps its promises.
Jon
__________________
1950 Land Rover series 1 1967 Land Rover series 2A LWB 1986 Land Rover series 3 SWB 1938 DKW SB200 1944 DKW NZ350-1 1967 Ural K750 sidecar outfit 1944 VW Kubelwagen KDF82 1942 Steyr 1500A 1944 Morris C8A 1943 Chevrolet CMP8A HUP? 194? Bedford QL |
#5
|
||||
|
||||
Moser Engineering makes custom axles for most anything.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
#6
|
|||
|
|||
A good reason to keep a yard full of donor vehicles?
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
#7
|
|||
|
|||
keyboard fumble
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2 Pdr Actuating Shafts | David Burr | The Gun Park | 1 | 27-11-15 09:43 |
For Sale: Carrier axle shafts | jeff davis | For Sale Or Wanted | 0 | 17-12-14 18:32 |
Shafts for the clutch and brake | meduffer | The Carrier Forum | 2 | 20-10-11 06:56 |
Suspension dismantling - balls and shafts | cantankrs | The Carrier Forum | 34 | 02-11-10 13:56 |
One and a half deuce and a half... | Bob Carriere | For Sale Or Wanted | 0 | 16-06-05 03:52 |