|
#1
|
||||
|
||||
parts identification
Hello
can some one help me to ident this parts , they are mot in my MKI parts book, so probably MKII parts. thank you Harlé Sylvain |
#2
|
|||
|
|||
Hello
can some one help me to ident this parts , they are mot in my MKI parts book, so probably MKII parts. thank you Harlé Sylvain the long clip for the speedometer cable is used on the MK-I* and MK-II*. the divisional wall cable cover, jump seat gravity latch, and bracket are right hand C31UCW. the Sutton harness adapter could be applied to a MK-I*, if so updated. while the starting handle appears to be portions from MK-II*, it has either been modified, or I am mistaken. the detachable pouch bracket/strap could be used on the updated MKI* to MK-II... but your example is 1944 dated and Canadian made. Last edited by Michael R.; 26-01-21 at 23:10. |
#3
|
||||
|
||||
The half pipe mounts on the division wall in the engine compartment behind the driver it is for the wiring / conduit and is a Mk2’ism.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#4
|
||||
|
||||
The long bracket at the back is a Sutton harness bracket for the driver, Mk2 again.
The other two smaller brackets appear to be seat latches for holding the seats up in the rear compartment.. again mk2. I am after a pair of those for my carrier.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#5
|
||||
|
||||
Just spotted Micheal R’s reply.
What he said...
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#6
|
|||
|
|||
Clip, speedometer casing, long
Harlé, your part number for the long speedometer casing clip should read:
C01UC 105340. It was used on each of the four Canadian three-wheel UC models after serial #2084. Last edited by Michael R.; 26-01-21 at 21:51. |
#7
|
||||
|
||||
Hello
Thank you both for your kind answers. Is my picture correct? Best regards Harlé Sylvain |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bren Carrier Parts Identification | RichCam | The Carrier Forum | 1 | 14-09-13 14:56 |
Parts Identification | Howard | The Sergeants' Mess | 6 | 11-04-07 12:25 |
CMP Identification 3 | Kuno | The Softskin Forum | 17 | 13-02-07 09:19 |
Help with identification | Redbeard45 | The Softskin Forum | 7 | 07-01-07 10:47 |
T16 Identification | jbledsoe | The Carrier Forum | 2 | 09-09-03 00:11 |