#1
|
||||
|
||||
Question about CMP to restore in Argentina
Quote:
The C15A Cab 13 came with the 2C, 2H and 2J series of body types shown in this picture: http://bcoy1cpb.pacdat.net/CMP_15_Cwt_body_styles.jpg (see source). While they can be remanufactured, an alternative in full wood could be the so-called Indian Pattern body. Those were manufactured in India where they were fitted to imported Canadian Chevrolet and Ford chassis/cabs. I have posted your question here so others can add a reply. Hope this helps, Hanno
__________________
Regards, Hanno -------------------------- |
#2
|
||||
|
||||
If the Cab 13 is a 1942 model it could have come with the 2B1 box too. That 8 cwt body in the link is all metal. Your friend's 15 cwt is a 1944 or 1945 model with the lifting flanges on the hubs.
The second pic is from the thread New photos of old vehicles at the Proving Ground.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 22-06-09 at 15:35. |
#3
|
||||
|
||||
Quote:
Quote:
Hanno http://www.geocities.com/cmpvehicles/body_aus_wood.html
__________________
Regards, Hanno -------------------------- |
#4
|
|||
|
|||
body
Very similar to the body that I built for the C15, The centre brkts and front corners came from the old C60 body which I believe was a workshop as it had a short section at front with mesh grill and drop down side WITH legs. There,s a good pic in Blue print to Victory P163. Bob
__________________
macca C15 C15A |
|
|