MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #91  
Old 15-01-22, 21:14
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 775
Default

(One practical demonstration of Boob's Law[1] later...)

Switchboard UC 6 line with battery and Box, Accessory, Switchboard UC 6-line containing 7 pulley weights and cords; operator's Telephone, Hand, No.2; Night Bell and connector. Weight 35 lb. 6 oz.

The current for the switchboard is provided by a battery of three cells (Cells, Dry, X, Mk.II; or Cells, Dry, Inert S, Mk.I) contained in a removable box behind the line units in the back of the case, connections being made to the battery box by means of plugs and cords. Terminals are provided on the line terminal panel at the back of the switchboard for the connection of an external battery if desired.

(Pulley weights are apparently optional for the 6-line version.)

The battery box has sockets on the end to take the two plugs from the switchboard.

Best regards,
Chris.

[1] You always find something the last place you look - I think I found manuals for everything between the pre-WW2 "Mark 236" and the postwar 40/160 Line Exchange before the Switchboards UC 10-line and 6-line pamphlet turned up!
Reply With Quote
  #92  
Old 15-01-22, 23:31
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Thank you very much Chris ! 4.5 Volts then . The field phones run on the same voltage i assume ? Boob’s law ?
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 16-01-22 at 02:11.
Reply With Quote
  #93  
Old 16-01-22, 02:06
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 775
Default

Hi Robert,

Boob's Law - see footnote [1] on my previous post.

Field Telephones for WW2 Commonwealth forces would be the D Mk.V for front line forces, Telephone Set 'L' for Linemen, and Telephone Set 'F' for higher formations (basically an office telephone for people with desks). All of those ran on 3 volts from a pair of 'X' or 'S' cells. Switchboards for higher formations would be the Switchboard F&F (Field & Fixed)which could support 20 to 60 lines and could operate with three switchboards in parallel as a combined unit.

Switchboard UC "Universal Call" supported buzzer and magneto signalling.
Switchboard F&F is magneto only.

Telephone set D Mk.V was buzzer call but buzzer or magneto ring
Telephone set 'F' was originally buzzer and magneto signalling but the buzzer was replaced by an induction coil (microphone transformer) later on (for better audio quality) and became magneto only.
Telephone set L was magneto signalling (only).
(There may have been some earlier (Post Office 110) telephones still used by linemen, but the 'L' was rather better.)

(Plus the various Remote Control Units (Canadian) and the British 'E' could connect to switchboards as magneto telephones, of course.)

All the manuals are available from the WS19 website - I think I scanned most of them.

Best regards,
Chris.
Reply With Quote
  #94  
Old 17-01-22, 00:26
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Wanted

Thank you for your detailed answer Chris - Wanted : Look at pictures . I want to set up an artillery comm truck so i need these to complete the CES. Photo credit : Bruce Parker .
Attached Thumbnails
0C74BC16-361F-4C39-831E-96EA6566BA34.jpeg   39336F2E-9E86-461B-B4CC-7FDFE7BCD824.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 17-01-22 at 00:49.
Reply With Quote
  #95  
Old 19-01-22, 20:26
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Tannoy speaker

Built a homemade Tannoy speaker today to listen to the WS No 19 set . Still looking for an amplifier to connect to one of the drop plugs but the search is narrowing .
Attached Thumbnails
04DD3013-1DE2-4668-ABCD-EEF2ACE8C84D.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #96  
Old 21-01-22, 23:48
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 775
Default

Quote:
Originally Posted by Robert Bergeron View Post
Built a homemade Tannoy speaker today to listen to the WS No 19 set . Still looking for an amplifier to connect to one of the drop plugs but the search is narrowing .
Looks good. Does the Tannoy speaker have a transformer attached to it?

There's a discussion of the Sexton SPG setup with Control Unit 190 that uses the WS19 IC amplifier to drive the loudspeaker. (This is not what you want, as it will be much too loud, being intended for 25 pdr gun crew instructions in a confined space, and the gun crew did not use headsets.)

It may provide a few pointers on how to do it, though.

(I recently bought a Canadian ALS No.2 Mk.2 loudspeaker (with added woodworm) that has the lower pair of terminals for the WS19 IC amplifier drive. That uses the 30 ohm tapping on the transformer (the ALS uses a higher impedance drive - I think what was known as "100 volt line" - to allow the use of field cable without excessive losses), and the loudspeaker switch selects 'A' 'Off" and 'B' on the Control Unit 190, with a resistance in series to prevent overloading the amplifier. (I intend to draw out the circuit diagram from the photographs in that thread, and match it with the parts list from EMER Tels FZ-256/3 in order to (a) see how it is supposed to work, and (b) construct something vaguely similar.)

The Sexton appears to be fitted with Control Unit No.2 for the Wireless Op,
No.190 for Commander (droplead) and gun crew (loudspeaker), plus a Junction Distribution No.3 for the driver intercom - though I need to check that.

On the move only the commander, wireless operator and driver would have headsets (intercom and wireless), maybe with the loudspeaker on when required. Deployed they could use wireless or lay wire and use the ALS for the GPO and four guns. (I think - I'm not an artillery person.)

Best regards,
Chris.
Reply With Quote
  #97  
Old 22-01-22, 17:01
Bruce MacMillan Bruce MacMillan is offline
a Canuck/Brit in Blighty
 
Join Date: Jul 2004
Location: Hell Fire Corner, Kent UK
Posts: 653
Default

Quote:
Originally Posted by Chris Suslowicz View Post
There's a discussion of the Sexton SPG setup with Control Unit 190 that uses the WS19 IC amplifier to drive the loudspeaker. (This is not what you want, as it will be much too loud, being intended for 25 pdr gun crew instructions in a confined space, and the gun crew did not use headsets.)
Best regards,
Chris.
The Canadian Army did approach PYE about producing a speaker for the 19 set. Quote was only a few (pounds, quid) per speaker. At that price it must have been only a box, speaker and maybe matching xfmr. They must have thought this was adequate enough volume to be useful. If you're not broadcasting to the neighbourhood you don't need much power.
Reply With Quote
  #98  
Old 22-01-22, 19:47
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Loudspeaker for No 19 WS

Thank you Chris and Bruce for your help and comments . Mystery solved gents . I had a two line telephone wire between the loudspeaker and the control box droplead and the speaker works fine on the A set and the IC . No need for an amplifier . Just plug the wires in the terminals at the bottom of the loudspeaker box . They are marked No 19 set …… I guess i could not go wrong . No more *@@&{}#*^ tight headsets for me !
Attached Thumbnails
3D1B3C41-E5A8-4C4A-BAC0-C2FF221FC463.jpeg   7789EFC0-D06D-4BBD-B22B-A9EF05EBC167.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 22-01-22 at 20:35.
Reply With Quote
  #99  
Old 26-01-22, 01:08
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Control panels

My friend Yves has finished making the control panels for the generators . Wow , so close to original ! Sourcing the parts was not easy . Bakelite or it’s modern equivalent , Phenolic is very expensive and difficult to source . Thanks again to Reg Hodgson for the electrical diagram .
Attached Thumbnails
52CDC511-7618-4E64-88CA-4A4648312FBF.jpeg   26F22BD1-0AE5-4BF3-A7A8-F8CD4064B4CE.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 26-01-22 at 02:25.
Reply With Quote
  #100  
Old 26-01-22, 20:24
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Behind the generator electrical control panel i am installing .Panel all wired up. It’s easy when everythink is all marked with codes as on the plan / diagram I will be looking for a smaller electrical box eventualy .
Attached Thumbnails
473A85CA-C991-435B-8AA2-423D7F6B1AFA.jpeg   F6F5B506-FD15-4CE2-8F34-BEF83F1AB8C4.jpeg   7226D22B-0CFD-4DED-838D-1EDF8B391049.jpeg   4AF4A128-6E92-4FBE-93B8-3812383C37F6.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 26-01-22 at 21:53.
Reply With Quote
  #101  
Old 02-02-22, 00:36
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Truck battery installed

New battery and new gas tank installed today . Still working on sourcing brake parts . Now that i know they are Ford certainly helps. Thank you friends . Made an order with Mac’s .Went to pick up the newly overhauled radiator with new core .
Attached Thumbnails
6B99BDA3-A054-49C6-9D24-5651B604121E.jpeg   06A6CC2A-302B-4071-A963-8FA16BB52D78.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 02-02-22 at 01:03.
Reply With Quote
  #102  
Old 03-02-22, 01:19
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

OK Chevy / Ford Blitz fans out there : Why two sizes ( width ) of brake excentric washers on these trucks ? I noticed of course that the rear shoes are way larger but that does not explain everything . Bob Carriere posted that they are 2 dfferent part numbers . That must mean something .
Attached Thumbnails
F52D4EB8-0C5C-4B63-AF50-5BF7098F1576.jpeg   BA1A9A33-5FB6-4AE2-86E8-88D88753B8C5.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 03-02-22 at 01:35.
Reply With Quote
  #103  
Old 03-02-22, 02:02
Jordan Baker's Avatar
Jordan Baker Jordan Baker is online now
Registered User
 
Join Date: Feb 2003
Location: Hamilton, Ontario
Posts: 3,828
Default

Are the thickness of the shoes the same or Id assume match the thickness of these brass pieces?
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #104  
Old 04-02-22, 00:11
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Thanks Jordan , good idea . My shoes are currently away at a shop for relining with asbestos like material . When i get them back i will look up closely, take pictures and post them .
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #105  
Old 04-02-22, 00:18
Grant Bowker Grant Bowker is offline
Registered User
 
Join Date: Jul 2006
Location: Ottawa, Canada
Posts: 2,152
Default

This is only an idea - I have no way to say good or bad.

Keep in mind that parts may have been replaced by "close enough" at some time in the past. Though I know you are trying to be as original as practical, you may also end up doing this if you find the parts you ordered from Mac's better match your brake shoes than what you have.
Reply With Quote
  #106  
Old 05-02-22, 21:27
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

You are absolutely right Grant , thanks .A lot has been happening . Brakes , bearings , oil seals needed attention . Installed a brand new carburator , fuel pump , generator and water pump. Primed the inside of the box .
Attached Thumbnails
67361207-95B9-43FE-AEFF-2F430C86C6F1.jpeg   F291A46F-F34B-4B26-8A06-3D10AED2E80F.jpeg   6281B335-2632-497D-B293-61CF60690438.jpeg   14465ECB-3B5B-47B3-A8F1-9FF11166EDEA.jpeg   1A7DA66F-3FB9-4C57-9A3F-0A4B3265B150.jpeg  

__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #107  
Old 05-02-22, 23:32
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Next week , another coat of paint inside the box and maybe an engine start .
Attached Thumbnails
14ACD00E-FA35-4711-8D1B-129557B05299.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #108  
Old 09-02-22, 00:14
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

I polished the inside of the rear drums today . What a though job ! Tomorrow i will do the front ones , Dirty , noisy , dusty ( old asbestos dust ) and lots of sparks . Cleaned and primed the back plate of the left rear wheel . Man those rear wheels are big !
Attached Thumbnails
5E4E84B2-0AC4-426B-A6FC-C13D23144899.jpeg   529FCEAC-88D3-4EFC-AD84-7079D179FE25.jpeg   E5E4702C-7CB9-4135-85AB-93FD4F7DFC48.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #109  
Old 19-02-22, 01:53
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Brake job

Adjustments unseized . Brake shoes relined and installed with new cylinders . Grease seals installed . Wheels re-installed . Waiting for banjo nuts and hydraulic fittings to connect brakes hoses . Meanwhile i restored and had a MKII No 19 set work like a gem . A good week .
Attached Thumbnails
395AF890-0736-41E2-94B6-8853C54F4A71.jpeg   581DFC45-39EA-4FF8-9905-959BB6436F33.jpeg   8BDB24C7-7D42-41F0-88F6-3213FDD9F98D.jpeg   BE76B019-7DF1-47AB-B4F7-34A37DAD7292.jpeg   2320059F-892E-4BA2-80D2-26AD2E6F63D8.jpeg  

__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 19-02-22 at 19:12.
Reply With Quote
  #110  
Old 19-02-22, 04:08
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Wireless No 19 MKII

Friends , i have just restored a MKII WS No 19 to operating condition . Is it period correct for a Wire-5 truck ? Should i stick to a MKIII ? Thanks .
Attached Thumbnails
50CA854D-31D9-4DB2-A801-D1729ED0DD90.jpeg   81482F24-7B0A-4AD0-BAD1-7D11AE7C6626.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 19-02-22 at 19:10.
Reply With Quote
  #111  
Old 20-02-22, 00:43
Bruce Parker Bruce Parker is offline
GM Fox I
 
Join Date: Feb 2003
Location: SW Ontario, Canada
Posts: 2,528
Default

Quote:
Originally Posted by Robert Bergeron View Post
Friends , i have just restored a MKII WS No 19 to operating condition . Is it period correct for a Wire-5 truck ? Should i stick to a MKIII ? Thanks .
My 2 cents. By the time the WIRE-5 came out Mk.III 19 sets would have been the norm. Operationally I expect these would have been installed unless not available. It would give all the wireless trucks the same radio with the same capabilities, characteristics and consumption of spares. Perhaps crates full of lesser-able Mk.II sets would have been used in second line units and training perhaps.

On the other hand, it takes a pretty keen eye to spot the difference from a few feet away so I wouldn't cast aside that Mk.II just yet.
Reply With Quote
  #112  
Old 11-03-22, 21:50
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Radiator installed . Carburator linked to the gas pedal . Coolant in the radiator , no leaks . Brakes functional , no leaks . Transmission forks were stuck . Got them unstuck . We should be ready for first engine start soon . Stay tuned . and wish me luck.
Attached Thumbnails
68D0C71F-6828-45EC-9636-D2B31D65C9BA.jpeg   9183F1B5-1D45-4974-97CD-5B4B0220D96C.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #113  
Old 15-03-22, 02:06
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

We have engine start ! Video posted on the FB page .
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 05-04-22 at 03:02.
Reply With Quote
  #114  
Old 05-04-22, 02:58
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Exact size of box windows

For the historical record here are the exact measurements of the windows on the box . Original inscription found today while replacing a broken one . Also , it was dated 1/44 . Maybe its a seven so that would be 7/44 .
Attached Thumbnails
B57AA978-2CA6-4DFE-BA8C-47DB06AE3230.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #115  
Old 05-04-22, 03:01
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default Trademark

Also found the Autolite trademark on the window ! It mentions it is safety glass like in the cars of the day . Two pieces of glass sandwiched together with a thin layer in between to prevent shards of glass injuring users .
Attached Thumbnails
B619A617-AA95-4786-A50D-2AA4F5E99A0B.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW

Last edited by Robert Bergeron; 05-04-22 at 15:09.
Reply With Quote
  #116  
Old 06-04-22, 23:45
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Today finished painting the windows i installed yeaterday . Installed the super structure : Guardrails and antenna protectors . The exterior is almost finished but it is never finished .
Attached Thumbnails
EBD560CF-AD9F-4C7E-8A94-D3926A943EF8.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #117  
Old 06-04-22, 23:46
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

Sideview of the super structure .
Attached Thumbnails
A98EBD86-30CC-4606-9601-5D52F0A74A4E.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #118  
Old 20-04-22, 01:21
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default antenna base

Working on the antenna base to be mounted on the roof of the truck. It should go on top in the next few days . I intend to make the Wireless set No 19 operationnal by next week .
Attached Thumbnails
6DDC0417-A096-4336-B5F0-DE369E8CF20B.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #119  
Old 21-04-22, 03:24
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

The mount seen from the underside .
Attached Thumbnails
F0B8C4E4-A6E8-4B4F-AF2E-5A14070856E6.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
  #120  
Old 21-04-22, 03:26
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,796
Default

The connection underneath .Aerial lead C6 .
Attached Thumbnails
DAB62BD4-93CA-462B-8F55-35F89771EC6D.jpeg  
__________________
44 GPW 44 C-15-A Cab 13 Wireless 5 with 2K1 box
44 U.C. No-2 MKII*
10 Cwt Cdn Brantford Coach & Body trailers
94 LSVW
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Communication Wire David Dunlop The Wireless Forum 11 29-04-15 07:56
wire 5 box jason meade The Softskin Forum 12 21-06-14 00:59
FOR SALE/TRADE: 1944 CHOREHORSE PROJECT for Signal Corps Wireless Power Unit Project Alain For Sale Or Wanted 1 21-02-07 00:11
Comms wire f/s chris vickery For Sale Or Wanted 4 03-02-07 19:39
Wire 5 Project Craig Tanner The Restoration Forum 16 27-06-06 17:05


All times are GMT +2. The time now is 06:05.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016