MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 15-12-22, 04:15
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default Building a new shop

Hey all

I figured I should do up a thread on what I’ve been up to this past year. I’ve been pretty quiet on the forum and the vehicles have taken a bit of a back seat. For the past few years I’ve talked and talked about wanting a new shop. My old shop had a lot of character, being that it had been a century barn that had been dismantled and rebuilt around the time of the First World War. The other portion (red shed) was equally as old and had been in place since the 1920’s. Prior to that it had been a cheese factory on the other side of town. Anyway, back to today. The building had seen better days, my wife was worried it would come down on me one day in a windstorm and she also wanted some indoor parking. Although I always told her with so many holes in the walls and roof the wind just blows through. She had none of that and wanted a new shop built, even before we renovated the kitchen..have I said she is a keeper….


Many hours were spent coming up with ideas and sizes/layout and what my needs were and could be in the future. I settled on a 50’x36’ deep layout with 12’ high walls. I also wanted a second floor and a gambrel roof line to keep it in character of the old barns in our area. I took my ideas to a local engineering firm and went over what I was thinking and a few weeks later I had some stamped plans drawn up. I highly recommend using a firm like that. Namely you get stamped drawings and secondly they know and work with the municipal building department already. In January I applied for my building permit and a few weeks later it came back I needed a variance. The size of building both in foot print and height was larger then what the zoning allowed for. However since I already had a building and the new one was 200sq feet larger and 6’ taller it was an easy but slow process of going to a committee of adjustment meeting. However this added months of idle waiting to the process. By the end of May the variance was approved and then I had to wait 20days for anyone to object. Once that was over it was another 10 days until I had my permit.

During this waiting period I was busy ordering product and getting supplies staged. I also decided I was going to try and do most of the work myself with help from some of the guys I’m on the fire department with.

I hired my friend with his excavation company to do the demolition and foundation digging. With two days warning that he was coming it was a mad dash to get the shop fully emptied. He filled two huge bins with the barn and also peeled off all the metal and put it in a separate bin.
Attached Thumbnails
EBCA79A1-A5C4-4843-A0A3-DAF3007B57BC.jpg   92754A91-8C57-4BA9-921B-0E605634C683.jpg   BAB4E275-AD45-47F8-980C-728D88934B23.jpg   33AE6110-7F8C-4ABB-B52C-1A66CC3FBF87.jpg   99897348-096E-48A7-81C0-8EC4308FC5C9.jpg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #2  
Old 15-12-22, 04:21
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Within two days the old shop was gone, the site cleared up and the foundation hole was dug. The weather was great with hole nice and dry, then the rain and rain and more rain came.

With some help I was shown how to frame footings and get them squared up. A couple guys from work were able to come by and help pour the concrete. We used a local supplier who provided their 50’ conveyor truck. This was a life saver a d was able to get the concrete right to where we needed it. After 40min the footings were poured.
Attached Thumbnails
94A4853E-0049-45D7-9721-4F951FD994BB.jpg   EEA125B9-2CDD-472F-B09A-2546468511D3.jpg   85547821-81D2-4CE6-96AB-02EFA327DB4B.jpg   4993EE16-D12C-478A-9D13-3B5685AC5645.jpeg   DC4FC14C-BA49-4748-AB40-7109232EF301.jpg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #3  
Old 15-12-22, 04:31
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

For the foundation wall I wanted to use Insulated Concrete Forms or ICF. With wanting to do as much on my own as possible here seemed the best way to go. This also provided me with a fully insulated foundation wall with over 5” of insulation. This was important as I’ll will be doing infloor heating eventually and I didn’t want heat loss through the foundation wall. The other advantage of the ICF is that I was able to build the entire foundation on my own and get all the rebar in two days worth of work. Some help was done with wood bracing ….then everything ground to a halt with a concrete shortage. 3 weeks went by before I was able to get two trucks worth to get the walls poured. Once the walls were poured and sat for a few days I was able to the big hole all back filled. Finally after two months I was mostly out of the mud.
Attached Thumbnails
AF5AF602-F75B-4060-8895-C4820F14AD54.jpg   B7C12923-C539-48E4-A91D-0BE311DE25DA.jpg   63F58718-6E96-4E0A-A499-A5ED784173E2.jpg   2F745252-7BBD-4784-9863-08166E280A6F.jpg   6A39A37B-401B-416F-B669-78AA623F7BE7.jpeg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #4  
Old 15-12-22, 04:42
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

And by the time this was done, my load of lumber had arrived. Who knew that pile would build a building. After about a month of working away on it I had my walls all up. Most of the walls I put up on my own including 16’ long sections that were 12’ high. I do not recommend doing this but at the same time I enjoyed the challenge. Some help was sought for getting the LVL’s in place and a final squaring up.

I also was under constant supervision from the site supervisors
Attached Thumbnails
AC374D66-C013-4A54-A508-301B0253B0B4.jpeg   C1178E1A-42D2-4E6B-A620-2C4A67D96596.jpg   1FA93DCF-DE78-4F74-8844-6309C3D4709A.jpg   6C8B1F26-882D-4E46-A840-681287B9A57C.jpeg   6A4C009B-17DE-4EBC-BC25-0A84B6159460.jpeg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #5  
Old 15-12-22, 04:50
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Finally the big day came with the arrival of the trusses and the instal day for them. A boom truck was hired and I managed to get a crew of guys in from work to help with getting them all installed. 26 trusses to go up. We started at 0800 and by 1530 the last truss was up and by 1900 the last of the strapping and bracing had gone on. For the next month I worked away on getting all the plywood sheeting down on the second floor, more bracing and all the wall sheeting and tyvek on the exterior walls.
Attached Thumbnails
941FD9B7-33F8-4796-AB0F-16A0E2653901.jpg   BE9AAE8C-7AD6-41A5-A465-A3732DC4818D.jpg   A88E684F-B21F-459F-A0BC-B460F4B448CC.jpg   F258B669-22E0-4E62-9361-7B8B22C2B3C1.jpeg   EDD9BDFF-C961-41FE-B2DE-70AB9252EC00.jpg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #6  
Old 15-12-22, 04:59
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

I did hire a company to do all the metal installation. My wife was adamant no one would be going up on the roof to install anything. The weather was also getting colder now and it was nice to watch from inside the metal going on. This past week the metal work was finished and the doors got installed. Just in time for winter weather to finally arrive. I still need to move a lot back inside for a storage tent I set up in the yard.

The shop is far from done as but I now have a sealed up shop.

Finally some reorganization and some vehicle stuff can happen again.
Attached Thumbnails
F4BF2943-7075-4B38-B5D0-2720A1A307B9.jpg   B5CCDA92-F133-4DC6-A291-8A11F0BCABC4.jpg   C5CF9311-6D7C-4B7B-826A-ECB8E8523BE3.jpg   A0B7C065-B2C2-4F8F-BF6E-F635EF24948F.jpg   51DE4941-6203-47CA-B2AE-FDCAFC4CAC11.jpg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #7  
Old 15-12-22, 05:24
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default Congrats......

Fantastic job Jordan......

...and a big thanks to Vicky for supporting you.
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #8  
Old 15-12-22, 06:23
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Bob, the size is 50’x36’ deep. 12’ high walls for first floor. The second floor is 24’4”x50’ with 8’ high ceiling and 6’ at the knee walls. I used what is called a gambrel attic truss. Pretty cool engineered piece that gives me an uninterrupted full span on the first floor
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #9  
Old 15-12-22, 10:23
Allan L Allan L is offline
Registered User
 
Join Date: Apr 2014
Location: Victoria, Australia
Posts: 39
Default

Where's the Like button when you need one?
__________________
Allan Layton
Reply With Quote
  #10  
Old 15-12-22, 10:44
Kirk Armitage's Avatar
Kirk Armitage Kirk Armitage is offline
Registered User
 
Join Date: Sep 2003
Location: Ottawa valley
Posts: 98
Default New Shop

Congrats on the new building . In floor heating eventually, that will be a game changer . It's hard to believe now ,but from my experience , you will fill that shop and then some...lol.
I look forward to your Otter restoration , after your construction is done.
Regards K Armitage
Reply With Quote
  #11  
Old 15-12-22, 12:12
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,426
Default New Building

Nice building! I'd love to have that in my back yard, although the city of Ottawa might not like it as it would fill my whole back yard...
Reply With Quote
  #12  
Old 15-12-22, 13:30
Robert Bergeron's Avatar
Robert Bergeron Robert Bergeron is offline
Registered User
 
Join Date: Nov 2012
Location: East Central Canada
Posts: 1,483
Default

Only word that comes to mind is «*wow*» ! Well done ! Years of enjoyment Jordan . Congrats. Nice family too.
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 /
44 U.C. No-2 MKII* /
10 Cwt Cdn Brantford Coach & Body trailer X 2 /
94 LSVW
Reply With Quote
  #13  
Old 15-12-22, 19:54
Paul Singleton Paul Singleton is offline
Registered User
 
Join Date: Feb 2003
Location: Yarker Ontario Canada
Posts: 508
Default Ottawa

Quote:
Originally Posted by Ed Storey View Post
Nice building! I'd love to have that in my back yard, although the city of Ottawa might not like it as it would fill my whole back yard...
My brother sold his home in Ottawa three years ago. There was a 12X20 garage in the yard. Look what’s there now!
Attached Thumbnails
97E91B2E-F826-468F-91E6-A7E6F3400C79.jpg  
Reply With Quote
  #14  
Old 15-12-22, 21:53
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,534
Default

Nice big shed Jordan. Tell me about your floor please? It looks expensive? I assume you can't have concrete because of the winter freeze? In the northern warmer part of New Zealand's climate, everyone uses concrete. My house floor is concrete (all one pour with the shed) (no insulation and no heat) The concrete in the house is polished. It is now 13 years old. Currently a house concrete floor is generally built on styrene. That style of build is referred to as a Rib raft floor. Here we might get ice on our puddles once or twice a year (or not at all)
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #15  
Old 16-12-22, 00:45
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Nicely done, Jordan.

David
Reply With Quote
  #16  
Old 16-12-22, 01:44
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Lynn

The concrete floor will get poured in the spring. I will be putting in floor heating as well. I’ve got all the tubes and styrofoam panels and rebar....lots and lots of rebar. Speaking of rebar I added “L” pieces that go from
The foundation wall I to the floor every two feet. When the floor rebar goes in there will be a grid pattern spaced every two feet both lengthwise and widthwise. This should greatly help keep the floor together for a long time and also keep foundation wall from leaning or the floor heaving. However with the infloor heating frost should not be a concern.
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #17  
Old 16-12-22, 01:46
Paul Singleton Paul Singleton is offline
Registered User
 
Join Date: Feb 2003
Location: Yarker Ontario Canada
Posts: 508
Default New shop

Your building is coming along nicely. I know that you will be much happier in a well insulated draft free shop.
Reply With Quote
  #18  
Old 16-12-22, 01:56
Eric R. Eric R. is offline
Registered User
 
Join Date: Sep 2003
Location: VA, USA
Posts: 92
Default

Wow that is a nice looking shop. I have to fight with my dad between his woodworking stuff and my vehicle stuff on who gets priority in the shop but it only allows me to pull a CMP in for work in a drive through aisleway. Looks like you can get several CMPs in there at the same time.
__________________
_________
1944 C15A Wire-3
1944 Willys MB (parts pile)
Reply With Quote
  #19  
Old 16-12-22, 02:19
chris vickery's Avatar
chris vickery chris vickery is offline
3RD ECHELON WKSP
 
Join Date: Feb 2003
Location: Nipissing Ontario Canada
Posts: 2,955
Default

Looks great Jordan
Do yourself a favour- let the concrete cure and then seal it. You will thank me later lol.
I applied an epoxy coating to mine including anti slip additive. It looks great and cleans up nicely. No oil stains and very durable. Mines been done for over 8 years and going strong.
As tempting as it is, hold out from filling your shop with junk, thinking you will work around it to finish the interior.
My shop is fully insulated with R24 wall, and covered with steel liner siding. Once again, easy to clean, bright and now worries about smashing holes in drywall, upkeep or fire.
Lights, put plenty in. Same goes for power receptacles.
Include service for 220v items like your welder and air compressor.
Run service air throughout the shop, restractable hose reel and extension cords off the ceilings. Anyway to keep stuff off the floor.
Mine is a 30 x 40 and while I thought it was large enough, it isn’t. You’ll find out.
Keep it up, you’ll get there, good luck.
__________________
3RD Echelon Wksp

1968 M274A5 Mule Baifield USMC
1966 M274A2 Mule BMY USMC
1958 M274 Mule Willys US Army
1970 M38A1 CDN3 70-08715 1 CSR
1981 MANAC 3/4T CDN trailer
1943 Converto Airborne Trailer
1983 M1009 CUCV

RT-524, PRC-77s,
and trucks and stuff and more stuff and and.......

OMVA, MVPA, G503, Steel Soldiers
Reply With Quote
  #20  
Old 17-12-22, 16:18
Hanno Spoelstra's Avatar
Hanno Spoelstra Hanno Spoelstra is offline
MLU Administrator
 
Join Date: Feb 2003
Location: The Netherlands
Posts: 14,400
Default

Fantastic job, Jordan!

Quote:
Originally Posted by Jordan Baker View Post
She had none of that and wanted a new shop built, even before we renovated the kitchen..have I said she is a keeper….
I wonder if she thinks you are a keeper too... or that you will be relegated to the shop once it is finished?!?
Reply With Quote
  #21  
Old 17-12-22, 22:38
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,517
Default

Congratulations on being able to accomplish a permanent workshop at a relatively young age. You will get many many good years out of it.

As someone else said, watch out for the junk that inevitably fills a shop. Set a timeline...if you haven't used it in one, three or five years (pick one) then drag it out to one of the storage sheds.
Reply With Quote
  #22  
Old 17-12-22, 22:51
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Thanks all

its been a tremendous amount of work and time to get it to this stage. So many things to think about long before they are needed.

Chris, ill be adding a large number of outlets to the walls. My plan is to do a pair of outlets in the shop side walls every 4 feet. They will be wiring with 12/3 wire on two different circuits. Both will be on 20amp breakers. This way I should never be short of a outlet nor worry about tripping one. I will also be doing 220 plugs on every wall/corner of the shop.

Im not totally set on my workbench/tools layout but this will give me many options.

The air compressor will be inside the utility closet under the stairs and then plumbed across to the shop side.

As for shop lighting ive bought 8 of these LED lights off of ebay. They are incredibly bright and I should have no lighting issues with them. At 20,000 plus lumens from each unit, Ill be around 166,400 lumens.
https://www.amazon.ca/gp/product/B07...5iJyKKups&th=1
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #23  
Old 17-12-22, 22:55
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

This is the light from one of these units. The last two pictures are of the light unit just sitting on a table and point up.
Attached Thumbnails
8A36FE29-D59B-40EB-930B-67BD38B98B57.jpeg   DA977229-95F5-4461-B523-36A3DEA7847A.jpeg   67402656-2590-484C-B778-3E4ED7EAD1DB.jpg   08E24521-2D53-4A9F-8B49-AD2E750F0793.jpg  
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #24  
Old 18-12-22, 13:08
Robin Craig's Avatar
Robin Craig Robin Craig is offline
Registered User
 
Join Date: Jan 2006
Location: Near Kingston, ON, Canada
Posts: 2,153
Default

Jordan, great to see the progress as it has gone on. If you want a quick temporary solution to seal the door thresholds for winter make up a small dummy wall panel and set it into the gravel and allow the door to close onto that. That assumes nothing needs to come in and out daily.

I agree with Rob about being brutal on timeline of items in shop.

Congratulations
__________________
Robin Craig

Home of the Maple Leaf Adapter
2 Canadian Mk1 Ferrets
Kawasaki KLR250 CFR 95-10908 ex PPCLI
Canadair CL70 CFR 58-91588
Armstrong MT500 serial CFR 86-78530
Two Canam 250s
Land Rover S3 Commanders Caravan Carawagon 16 GN 07
Trailer Cargo 3/4 T 2WHD 38 GJ 62
Reply With Quote
  #25  
Old 18-12-22, 22:49
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default Any room for one more suggestions.......

As you will be enjoying the workshop for many more years you may fiond that the stairs are getting longer, steeper, phew!!!!

Consider building a home made "dum waiter" elevator to the second floor...... nothing for people to ride in but something that will handle a motor on wheels, a tranny, T case...... All built of wood driven by a 110 Volts 1500 pounds winch mounted above.... you can check Phil Waterman's site for ideas as he built one ........ when you get to be 80 years old it will be a blessing .......

I use a PA 110 v. winch on the "I" beam that overrides the second floor doors.. it allows to store a full engine on a wheeled dolly...... safe and a back saver for sure. A 40x40 in. elevator floor would allow wheel on... wheel off..... one man job!!!

You are the envy of all MLU......
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #26  
Old 19-12-22, 14:25
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Elevator make such a good work bench

Hi All

Yes the elevator makes the storage in the loft so much more useful. Of course you have to have to the structure designed for the load. The company that built my shop could not understand why I wanted the second floor built with such a high load in mind, they usually built barns design for hay in the loft.

But the thing that makes the loft so much more useful is well designed and laid out storage shelves. You can easily double usable sq.ft. of storage space of the floor. The elevator is the key to getting those truck truck transmissions and engine store away.

The unexpected side benefit was using the elevator platform as an adjustable height work bench.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote
  #27  
Old 26-01-23, 05:41
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

Picked up three shelving units yesterday from a rather large warehouse yesterday just outside of Milton. I went with 96” long, 24” wide and 60” tall. Now I can finally get some organization going on with the “stuff”.

First picture is of the suppliers warehouse, and I thought my shop was pretty big.
Attached Thumbnails
6602547C-E6E8-4100-8AB8-6C3FCE7AA363.jpg   9DB6DE44-5362-4ED0-8B27-BDFEED642E64.jpg   8E7722F7-D9D9-489D-9193-D66D5E335BA6.jpg   CABC687F-831D-479F-8CB3-DA018437B23B.jpg   35E81BFE-031C-465D-B429-50312970E8F3.jpg  

__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #28  
Old 31-08-23, 18:39
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

It’s been a busy time getting the shop floor prepped for the concrete pour. About 20tons of gravel was brought in and levelled off. I then spent the better part of an evening running a compactor around and around getting everything packed down. HotRock insulation panels were put down followed by 2000’ of PEX and then about 100 pieces of rebar. Lots of time was spent by myself getting this all set and just right. The cement guys put in a couple of rebar spikes for height pins. They went in about 5” then stopped. Turns out I got the base compacted pretty good.

Today the guys showed up before 0630 to get ready for the concrete pour. The first truck rolled in at 7 and the last one left around 10am.

Finally the site supervisor wanted to come out of the house and take a look. After pointing at everything, he approved.
Attached Thumbnails
IMG_9891.jpg   IMG_9892.jpg   IMG_9893.jpg   IMG_9894.jpg  
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
  #29  
Old 01-09-23, 02:54
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default

Very nice, Jordan!

What length of cure time did they give you for that size of pour, and will you be sealing/coating it before rolling the vehicles in?


David
Reply With Quote
  #30  
Old 01-09-23, 04:22
Jordan Baker's Avatar
Jordan Baker Jordan Baker is offline
Moderator
 
Join Date: Feb 2003
Location: Hamilton, Ontario, Canada
Posts: 4,000
Default

David,

They told me to wear slippers if I go in tonight to turn off the lights and lower the doors a bit. They are coming back tomorrow to put some cuts in and also apply an acrylic sealer. Then it’s wait at least a week before anything heavy goes in.

After about 7-8 times around with the power trowel over the course of about 5hrs, they and myself were quite happy with the floor and it’s smoothness.
Attached Thumbnails
IMG_0150.jpeg   IMG_0151.jpeg  
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ont Regt / Oshawa Museum New building Robin Craig The Sergeants' Mess 5 09-01-18 03:35
Building the Alaska Highway!! Garry Shipton (RIP) WW2 Military History & Equipment 47 24-12-11 08:20
Landy 2A W'Shop Richard Coutts-Smith For Sale Or Wanted 2 05-03-08 10:04
Building bridges... Snowtractor The Sergeants' Mess 0 23-06-06 17:42
Building Tankers in the Field centurion The Softskin Forum 6 23-11-05 20:48


All times are GMT +2. The time now is 13:01.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016