Wanted: Ford 13 cab door

Kirk Armitage · #1 16-08-14, 01:47

Looking for a Driver's side (right) door with hinges, for a F15, 13 cab. Need to get my KL welder restoration underway again.
Thanks Kirk Armitage

Kirk Armitage · #2 07-09-14, 14:37

Still looking for a rht ( drivers door ) 13 can ford.
Thanks.

Maurice Donckers · #3 07-09-14, 22:31

This is the hardest part for 13 cab`s , most doors get mangled when reversing with an open door , I just put new outer panels on the doors , pressed the rib in the top , and folded the sides , and then over the inner panel.

Kirk Armitage · #4 07-09-14, 23:22

A re -skin wouldn't be to bad Maurice, unfortunately the door was missing, either it was banged up driving or somebody wanted the data plates. Lots left to do, one will turn up eventually.
K Armitage

Stew Robertson · #5 10-09-14, 20:03

HI Kirk
A chev door will fit,

and unless some one is real good no one will ever know

Kirk Armitage · #6 10-09-14, 23:33

We'll make that plan "B" , Stew ! If I was to sit my Ford underwear that close to a Chev door , might lead to severe chafing !
K Armitage

rob love · #7 11-09-14, 00:23

Quote:

Originally Posted by Kirk Armitage

We'll make that plan "B" , Stew ! If I was to sit my Ford underwear that close to a Chev door , might lead to severe chafing !
K Armitage

That or your engine would lose half it's oil pressure and start to leak oil.

Bob Carriere · #8 11-09-14, 19:04

KIRK ..... when did you start wearing underwear????

Cheers

Kirk Armitage · #9 11-09-14, 22:05

Bob , that's between you and me ! Still respect you as I know you drive a super duty !Looks like my door thread is going down hill fast. Still looking for a ford door, underwear optional ! K Armitage

Bob Carriere · #10 12-09-14, 17:00

Seriously I wish I could help you out but all our trucks and parts truck are Chev.

Your best luck would be West of Ontario .......... we have a few Ford running gear frames but no Ford sheet metal.

Shipping by Greyhound would not be to unreasonable it seems.

Cheers

rob love · #11 12-09-14, 17:38

Actually we have an Ontarioan out this way right now who is driving back at the end of the month. He says it is because the work will be done, but I suspect it is to avoid the cold. So a door out this way would be a possibility. There is more Ford out here than Chev.

Kirk Armitage · #12 12-09-14, 23:34

Thanks guys, you never know what will turn up.
K Armitage

chris vickery · #13 13-09-14, 02:16

Kirk
I did put out the word with Rob L when I dropped in the other day.
I am out here until approx Sept 24 or so and head back to Ontario then so possibilities exist
For a pickup anywhere between Brandon and the Hwy 17 corridor

Kirk Armitage · #14 13-09-14, 02:57

Thanks for the offer of transport Chris, we'll see if something comes along.
Regards Kirk

Gord Falk · #15 14-09-14, 05:26

Hi Kirk,

I have a decent CMP drivers door available, which I can send with Chris back to Ontario.

The door opening mechanism is not in it, do you have an old door to take it off from, if not I can go through the boxes of stuff I have and find one, same goes for the hinges. The door is in good shape and rust free.

While I am looking for the door parts are there any other parts you are looking for?

Gord Falk

Steinbach MB
15CWT Ford GS
15 CWT Chev Wireless
Ferret 2/3
M 38 & M100 trailer
Iltis
UC Mk2
M 274A5 mule

Kirk Armitage · #16 14-09-14, 12:24

PM sent Gord
Thanks Kirk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ford CMP door markings	derk derin	The Softskin Forum	5	20-10-09 16:24
Wanted Ford Driver's Door	Mike Timoshyk	For Sale Or Wanted	2	16-02-09 21:51
FS: NOS Safety Door Straps for Willys MB and Ford GPW	Prem	For Sale Or Wanted	0	17-06-08 00:33
Chev & Ford CMP Door Interior	Bob Moseley (RIP)	The Softskin Forum	7	01-01-04 09:41