![]() |
#4
|
||||
|
||||
![]()
hi Bob ,
I have been using this method for some years with good results , it is particularly good for delicate parts that would disintegrate under sandblasting . You can use Caustic Soda in the electrolyte solution as well as washing soda , it will remove paint as well as the rust . Caustic soda is a bit nasty and it burns skin so you have to be carefull . It would be possible to use one of those kids plastic swimming pools and try doing a whole chassis . The great thing is , it is so cheap . You have to keep an eye on the charger to check it isn't overheating . Also , I would not leave it un - guarded overnight in a shed . Mike ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Thread Tools | |
Display Modes | |
|
|