Wireless Set No. 52 Canadian - Project

[David Dunlop]

The inside face of the plywood back panel had quite an accumulation of dust and dirt on it, but I found three or four wipes with a wet cloth took it all off quite nicely. I then let the panel dry for about 20 minutes and then gave it a good rub with a cloth soaked in Lemon Oil and let that soak in.

Looks pretty good before I put the panel back in place and when I had done so, I gave the outside face a good rub with the Lemon Oil as well.

Back in Post #1203, I had commented that the small rectangular stamp from Rogers Majestic on the end on one of the wooden battens was possibly a Part Number, but I found nothing else like it anywhere inside the switchboard, so I am now suspecting this was an Inspection Stamp.



David