Wireless Set No. 52 Canadian - Project

[David Dunlop]

The Front Panel assembly is mounted to the Coil Chassis assembly by eight round head, slotted, brass, zinc plated machine screws. See the first two photos.

The red highlighted ones in two vertical rows are made up of 10-32 x 3/8-inch screws with matching Shakeproof washers and hex nuts. The screws pass through two sets of holes in the brass angle frame of the sides of the coil chassis and are secured with the washers and hex nuts.

The two yellow highlighted screws across the lower edge of the front panel are 8-32 x 3/8-inch and thread directly into the two brass angle brackets mounted along the front edge of the bottom plate of the coil chassis. These two arrangements are shown in the 3rd photo of my spare parts coil assembly.



David