MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > Post-war Military Vehicles

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 25-06-23, 15:29
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,718
Default M-Gator

Rob,

Will you be mounting a C6 on your vehicle....?
Reply With Quote
  #2  
Old 25-06-23, 20:46
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,594
Default

I only have a brit made copy, L8 I believe. I do not have a c6.
I am only presenting this vehicle as an administrative vehicle, and not a fighting vehicle, so there will end up being just the personal weapons, webbing and kit if it goes on display. I will not be presenting it as a vehicle that was in Afghanistan, but rather as a vehicle of a type that was. It did go to Mali with the UN, so it has a bit more history than your average golf cart.

Been busy in the shop with wiring repairs. There is corrosion in a lot of the connectors, so they have to be disassembled and the terminals cleaned or replaced. I have found a circuit that could not have possibly worked (front marker lights), so a bit of rewiring is required there. I may also add an interlock so the regular lamps, including brake lights, won't illuminate when the blackout lighting is energized.
Reply With Quote
  #3  
Old 17-08-23, 05:22
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,594
Default

I took the cargo box apart and sandblasted most of it. Then I decided I needed the Gator for an event in the area, so quickly painted the box and re-assembled it. It also got a Canadian fire extinguisher bracket to replace the US type, but that may get reversed.



I also found the winch on kijiji. Cost more than I wanted to pay, but a lot less than from John Deere. I doubt I'll ever need it, but this vehicle was set up for it, so it is there.



I still have to remove the front grill and stretcher frame and repaint them. But as it stands now, the vehicle runs and it is a hoot around the yard. I do have to say that the lack of a suspension on the back makes it a little rough on poor terrain. I may try and lower the tire pressures some and see how that works out.
Attached Images
File Type: jpg Gator 12.jpg (196.0 KB, 1 views)
File Type: jpg gator 11.jpg (280.8 KB, 1 views)
File Type: jpg gator 10.jpg (509.4 KB, 2 views)

Last edited by rob love; 17-08-23 at 05:55.
Reply With Quote
  #4  
Old 19-08-23, 00:04
derk derin's Avatar
derk derin derk derin is offline
Registered User
 
Join Date: Oct 2005
Location: West st. Paul,Manitoba
Posts: 846
Default I’ve been waiting but…………..

Still no picture with a stretcher on it!
Derk
__________________
1942 Ford universal carrier Mk 1
1943 Ford 60 cwt long CMP ambulance
1943 Ford GPW 1/4 ton stretcher jeep
1943 Bantam T-3 1/4 ton trailer
BSA folding airborne bicycle ser#R5325 (early)
Reply With Quote
  #5  
Old 26-08-23, 04:18
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,594
Default

So just for Derk, here are a couple shots with the stretchers affixed. I talked the wife into playing one of the casualties, and my Santa Claus dummy who has been residing in the quonset filled the other stretcher.
The literature says it can transport two stretchers, however two will fit neatly onto the cargo box with the third on the front rack.

In the one photo you can see the tail-lamps I ended up going with. The originals were damaged, and did not appear available separately. You had to by the complete $350 USD deluxe lighting kit from John Deere to get the originals. I ended up getting two of the LED sealed taillights along with markers, in the steel boxes for $40 Cdn from Amazon. The problem with them is they look a little too fancy for a military vehicle.



I may take the gator to the last cruise night of the year. I don't think I can talk the wife into laying on the stretcher for 3 hours in public, so I'll likely take the mannequin that is dressed up in the arid cadpat.
Attached Images
File Type: jpg 20230825_180025.jpg (543.7 KB, 1 views)
File Type: jpg 20230825_181200.jpg (717.8 KB, 5 views)
File Type: jpg 20230825_181217.jpg (464.8 KB, 3 views)
Reply With Quote
  #6  
Old 24-12-23, 04:29
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,594
Default

So a little update to the project. First the tires: I had found some nos of the original p-tracker tires when I started this project, but settled for some non-original tires for the back. I did buy two used ones thanks to superdave, and had located a few pairs out east. But after keeping an eye on ebay for a while, a stack of the proper p_tracker run flat tires became available on ebay for a very decent price so I bought a set of 4 new ones. The fellow at the border place commented that they were as heavy as light truck tires. Anyway, they will wait for spring before getting installed.

The other update is on the rear lights. The original lights were in poor shape, with one cracked lense and both brackets bent. The rear light kit from John deere is several hundred USD. I had replaced them with sealed LED light in steel. Ones which I had mounted underneath the cargo box. But I was not happy with them not being original. I had tried to locate lenses from speaker, whose name was on the lenses but had no luck looking over their inventory. I had resigned myself to paying john deeres price along with the 3 hour round trip to the US border and back. But a google search led me to photos of some taillights for a polaris atv from around the same time period as the gator. I got some from a company here in canada for $15 ea with free shipping and they were a perfect fit. I straightened an repainted the original brackets, cleaned up the wiring harness, and have everything reinstalled and working. As these lights are now the widest part of the gator, I can see them possibly getting damaged one day, and I am not quite loving the look of them, but they are oem and that is what matters most.

One last job will be to replace all the rubber lines along with the fuel filter housing over the winter. She loses a little prime over a few days and has to crank about 10 times to start. She used to start almost instantly....I want that back.
Attached Images
File Type: jpg ptrack.jpg (277.6 KB, 0 views)

Last edited by rob love; 24-12-23 at 04:58.
Reply With Quote
  #7  
Old 31-12-23, 20:26
Marc Montgomery's Avatar
Marc Montgomery Marc Montgomery is offline
aut viam inveniam aut fac
 
Join Date: Feb 2003
Location: Canada
Posts: 608
Default

Another excellent resto Rob. I am highly impressed.


It is interesting that the CF is looking into these modified ATV things for tactical, recce /special forces duty. such as the MRZR and the Polaris Alpha.


Seems from the requirements that the Iltis would fit the role although these military ATVs might be somewhat quicker, but not necessarily faster?
__________________
I see you stand like greyhounds in the slips,
Straining upon the start. The game's afoot!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 03:59.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016