Rear Hub Seal F60S LAAT

[Tony Smith]

Originally Posted by Lynn Eades

They should be found at lower prices than Jacques's listing?

New production: https://www.ebay.com/itm/26447757106...75.c101224.m-1
Original Ford: https://www.ebay.com/itm/293878255241

They are from the US, so you need to factor in shipping, but when combined with other purchases, they work out quite economical ( for EarlyFord2OK on Ebay, some good parts there, and their shipping is always overquoted, works out cheaper in the end.)

[Lynn Eades]

Rob. Interestingly The British manual (Chilwell 63/63. Jan.43) shows seals at all 3 locations. The tube seal is shown in a rebate as you say.
I have 3 axles made in the USA (1940) for the N.Z. govmint to go in the 40 Bren carriers built here in N.Z. (they don't have the rebate or the seals) These would have been Truck axles for use (I assume?)with the enclosed prop shaft. These 1938 pattern axles have the weld on mounts for the two arms that go forward to the prop shaft housing and have crown wheels that bolt to the diff carrier.
Back to topic.