2pdr. Scope Questions?

[rob love]

There was a quantity of the eyecups sold in a lot at the recent auction, and more sprinkled throughout the auction lots. They do not seem to have surfaced on ebay yet, so may well be stashed away in someone else's inventory.

I managed to get 3 or 4 in a lot of other misc items. None for sale unfortunately...I have that many scopes that need them.

[ChaseR83]

Thank you for the replies,

Has anybody tried to disassemble one of these scopes for cleaning? I assume that they are not nitrogen filled like later rifle scopes?

[rnixartillery]

I think I have a few of the black Eye cups left if anyone needs one.

Rob.................rnixartillery

[ChaseR83]

Originally Posted by rnixartillery

I think I have a few of the black Eye cups left if anyone needs one.

Rob.................rnixartillery

I'd be interested in one if you don't mind shipping across the pond...

[Mike Cecil]

Can't quite read the nomenclature on the scope in the image.

The 2-pdr in the Matilda used either a No.30 or No.33 telescope, or in Aust, the No.133 (Aust) Mk.1.

The 2-pdr A/T used the No.24B Mk.3 scope or, in Australia, the No.124 (Aust) Mk.1 Scope.

The 25-pdr also listed the No.24B Mk.3 and the No.124 (Aust) Mk.1 as alternatives.

As marked, this is an Australian scope manufactured by J.W. Handley Pty Ltd in Victoria, Australia. Company also manufactured dial sights and other optics. It is dated 1941, so most likely for the 2-pdr A/T or 25-pdr guns. Matilda didn't start arriving in Aust until first half of 1942.

Mike

[ChaseR83]

Originally Posted by Mike Cecil

Can't quite read the nomenclature on the scope in the image.

The 2-pdr in the Matilda used either a No.30 or No.33 telescope, or in Aust, the No.133 (Aust) Mk.1.

The 2-pdr A/T used the No.24B Mk.3 scope or, in Australia, the No.124 (Aust) Mk.1 Scope.

The 25-pdr also listed the No.24B Mk.3 and the No.124 (Aust) Mk.1 as alternatives.

As marked, this is an Australian scope manufactured by J.W. Handley Pty Ltd in Victoria, Australia. Company also manufactured dial sights and other optics. It is dated 1941, so most likely for the 2-pdr A/T or 25-pdr guns. Matilda didn't start arriving in Aust until first half of 1942.

Mike

I pulled it back out and checked it, it's a No. 124 L.P. Mk.1 scope

[Mike Cecil]

Good: early nomenclature for the No.124 (Aust) Mk.1. The LP stands for 'Local Pattern' ie Australian design or modified for Australian manufacture. 'LP' was dropped by early 1942, replaced by 'Aust'.

Mike