|
|
#15
15-03-05, 19:53
|
||||
|
||||
Phil, I remade the windshields for my 12 cab myself.
It is actually quite easy, especially if you have an old junk one for a pattern. I aquired some NOS M37 windshield frames (easy in the USA) and reworked them. I discarded the brackets etc from them and cut them up into the proper shape. You will need to make a couple pieces from flatstock for the center piece. I built a jig on a piece of 3/4" plywood and used woodscrews to secure in place. Once all the pieces were secured and doublechecked for accuracy against the original, I simply tack welded it together using a TIG welder. I had the glass cut and mounted at a local glass shop.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode