1944 C-15A-Wire-5 Restoration

[Robert Bergeron]

Bob C. , i had to work on a project even on Xmas Day ! Intalled Gen 2 , the second Chorehorse today because i was dreaming about it last night ..... So this is option 1 with two 300 Watt 12 V Chorehorses . Connected the wires and the exhaust , turned on the proper switches and had BOTH generators running and charging BOTH battery banks ! The other option of course is one Chorehorse and one 110 V Onan 1000 Watts generator . Nice having both options available ... Merry Xmas !

[Wayne Hingley]

Nice work Robert. Im curious how loud it is with the generators running and all the compartments closed up?

[Robert Bergeron]

Thanks for your nice words . It’s noisy Wayne ! I made rubber pads for the supports so that reduces the noise considerably . The fact that they both exhaust outside helps also . The original had a muffler under the body so i installed one on the 1 inch line . It is bearable . I wish i knew how to post a video here it would be neat to let you hear it .

[Bruce Parker (RIP)]

Originally Posted by Robert Bergeron

I made rubber pads for the supports so that reduces the noise considerably ..

I ain't going rubber pads on my HUW chorehorse. It's metal on metal crankin' out the decibels all the way baby!!!

[Bob Carriere]

If you have ever been to an antique engine collector how you would see civilian Chore Horse running and fitted with a 20 foot section of flex pipe fitted with a cast iron ball type sound breaker.....which they usually buried in a few inches of loose dirt.

The noise level becomes quite subdued and muffled.

Any reason why the military would not have used a similar contraption????

Bob C.

[rob love]

The chorehorses did come with that flex line for burying into the dirt. I think you just transferred the regular muffler over to the flexpipe, but won't say for sure. It's been a lot of years since I worked with them.
It made them very very quiet.

[Robert Bergeron]

Reference picture of the correct Canadian Chorehorse for the 2K1 box. When operated on the move from the generator compartment they are noisy because you can’t obviously bury the flex exhaust in the ground to damper the noise . The flex hose is seen in the illustration with the small pancake muffler for ground station use when you pull it out of the truck . I was fortunate enough to find two of them in good working order . Both were made in 1943 and are almost identical except for a few minor details , probably replacement parts . Both have their protective covers . Much less common than the later Post-war 30 Volts conversions . British models had protective cages like the Post-war version .

[Chris Suslowicz]

Originally Posted by rob love

The chorehorses did come with that flex line for burying into the dirt. I think you just transferred the regular muffler over to the flexpipe, but won't say for sure. It's been a lot of years since I worked with them.
It made them very very quiet.

The BSA version that I have (still crated) comes with flex hose and muffler, but as far as I'm aware they were only ever used with the flex hose in the field: drag it away from the vehicle (downwind), extend and bury the hose, then recharge the spare set of batteries (do NOT float-charge the WS19 battery).

Unfortunately my crate was opened and is missing the tool/spares box with the manuals, cables, etc. (I have most of the spanners and am looking for the rest of the bits.)

If running them in the vehicle I'd fit a couple of carbon monoxide detectors - one in the generator compartment, and the other near the operator position, just to be on the safe side.

Chris.