How To: C8A restoration in Holland

[8threcce]

Hi everybody,

Again it has been a while but step by step I'm getting there.

I moved the chassis out of storage and last few weeks we rundown all the items that needed to be fixed and all where dealt with.
The Chassis now has breaking power, emergency brake is working and we fitted the oilfilter to the engine brakes and made some oil lines.
The both drive shafts where redone , completely balanced and one got a new tube (super job).

Main progress on the body.
Side panels are added to the frame and we are now working on the roof and specially the hatch opening.

I managed to reproduce the hatch structure and we are now in the progress of adding the hatch frame to the roof.

119676374_3334205493294917_8080587729867239815_o.jpg119725361_3334205669961566_1121555312091975621_o.jpg

114031912_3172083812840420_7932410904764833684_o.jpg

124037728_3489316501117148_1988132533143331074_o.jpg

[8threcce]

some more pictures

125053717_3492120934170038_5374262733080621456_o.jpg 124591229_3492120707503394_2546380215944984245_o.jpg

124831620_3492120300836768_5964644025794583867_o.jpg

124634328_3492120400836758_1376027018833152924_o.jpg

[Hanno Spoelstra]

Hi Pieter,

Great to see all the sheet metal work. Impressive project, hope to see it on the road sometime!

[8threcce]

Yesterday we entered the final stage of mounting the roof of the C8a

The piece that we mounted is the rear of a C60 Cabin roof cut to fit the C8a
In width we didn't ajust anything it just fits like a glove.

The hardest part of the body is now over and we get into the nitty gritty of grinding and detail work.

All sheet metal is Zinc coated

[8threcce]

some progress pictures on the HUM body

[8threcce]

Installed the front hatch