Brake rod covers

[RichardT10829]

Will check my stash Tom, may have a pair, or at least good patterns to make some more, I believe there should also be some springs under the rods which mount to the floor, my memory is a bit fuzzy on that detail though.

[Petr Brezina]

You are correct Richard, there should be spring underneath (at least on Mk.IIs). I have drawing somewhere, but Im almost sure that that drawing is also somewhere here on the forum. Try to dig it out Tom

[stephen crowhurst]

I think this is the spring you are looking for, I can't remember who was good enough to put it on here, but copied it for when I get round to making some.

[Michael R.]

Drawings for the cross tube grease gaiters were also posted... I believe by brengunman?

Have a peak here . . .

http://www.mapleleafup.net/forums/sh...35&postcount=3

[super dave]

Originally Posted by stephen crowhurst

I think this is the spring you are looking for, I can't remember who was good enough to put it on here, but copied it for when I get round to making some.

That was me that posted the dimensions, Here are the ones I made from some metal Banding.

[super dave]

Here are the covers I had made and you can see in the first pic where the spring plate mounts under the cover.

[Tom Millward]

Those are the ones I am looking for. Do you have any dimensions Dave?

[super dave]

Sorry I don't but you could try Doug Lavoie as he is a member here.