Lynx II, hull # 4225

[Hanno Spoelstra]

Originally Posted by Alastair Thomas

Does any one sell copies of the WS19 Installation Instructions shown above?

Also, what are the dimensions of the tool bag in the tools illustration above?

Louis Meulstee’s web site Wireless for the Warrior may be of help?

http://www.wftw.nl/

Hanno

[Peter Duggan]

Alastair,

PM sent.

Peter

[Alastair Thomas]

With reference to Peter's post #791 showing the stowage diagram for the Lynx II, I thought readers might like to see the equivalent for the Lynx I.
The diagram acknowledges that a radio may be fitted (as was the case in all the Lynx I know about) but the diagram shows boxes of bren gun ammunition in its place.
Alastair
F60S
Lynx I MkIII*

[David Dunlop]

Interesting, Alastair.

The Lynx I setup is probably a direct, or very close to, match for how the Dingo was equipped.

David

[Peter Duggan]

Alastair,

Thanks for posting the stowage diagram for the Lynx 1. My stowage diagram for the Lynx 11 does not have a view of the interior of the front bin. I'm confident that radio equipped Lynx's have a different stowage arrangement but it provides some good hints.

Thanks again, Peter

[Peter Duggan]

Guys,

While I am confident that my Lynx was never equipped with a sun compass, the brackets that it mounted on were fitted based on all the evidence that I can find. Mine were missing until Alastair Thomas provided me with some great drawings that Andy used to fabricate them. Now primed and mounted. I've also been making some good progress on assembling on gathering the kit, again thanks to some good friends on MLU.

Peter


IMG_2150.jpg

IMG_2138.jpg

[Peter Duggan]

Guys,

Ever since I had an incident of front wheel shimmy after hitting a bump at speed, I had become uncomfortable on how I had set the front wheel bearings.

With Robin's assistance, I was able to persuade Gerry Foster to visit and reset the front wheel bearings "by the book". Next on my list is to have the wheel assemblies balanced by a heavy truck shop. Now looking forward to this spring's first run.

On a cosmetic note, I was able to source original hose clamps from Early Ford, SC. Took a total of 16, but the engine compartment certainly looks better.

Peter


IMG_2156.JPG

IMG_2161.JPG

IMG_2162.jpg