A Study Of Seals

[Hendrik van Oorspronk]

I am getting confused,

I have a C8A over here, with seals outer dia. 6.25" and inner 5.00" are they a different size then the C15A??
In the manual there are 2 sizes of joints, 5" or 6". with 4 or 6 studs at the steeringlink.
But no 4,5" ???? I can not find them.

Groeten

Hendrik

[Hanno Spoelstra]

Originally Posted by Hendrik van Oorspronk

I am getting confused,

I have a C8A over here, with seals outer dia. 6.25" and inner 5.00" are they a different size then the C15A??
In the manual there are 2 sizes of joints, 5" or 6". with 4 or 6 studs at the steeringlink.
But no 4,5" ???? I can not find them.

Groeten

Hendrik

Hendrik,

Is the old seal in the C8A the following dimensions: Shaft 5" and Bore 6.25"? If so, then use SKF 49998 http://www.skfextranet.com/catalogs/...il.asp?s=49998

If it measures Shaft 4.5" and Bore 6.25", then use SKF 45150: http://www.skfextranet.com/catalogs/...il.asp?s=45150

You can cross reference any seal via http://www2.chicago-rawhide.com/ > "Seals North America Part Lookup". Punching in Shaft and Bore diameters gives you a list of current seals.

HTH,
Hanno