11 Set stuff

[Chris Suslowicz]

Originally Posted by Ron Pier

Apart from the line drawing in post 531. This is all I have. Cheers Ron
PS I've no idea why they're not produced as thumbnail pictures, so just click on the attachment if they don't appear.

Ron, are you proposing to make battery boxes?

If it's any help I have two bottom sections of the 18-set battery boxes available. They are completely gutted and missing the lids because a previous owner got a lot of them as surplus, fitted knobs to the side, and used them for parts drawers.

You'd need to fill extra holes, blank off the 5-pin socket and work out how to fit the WS11 socket to the shell. The internal dividers were wooden. It's the same shell as the WS1 (and 11) battery box because someone had a WS18 box fitted with the earlier lid (which had the designation moulded into it.

They will need a good clean and polish, plus reproduction of the strap fixings, etc.

Let me know if this is useful.

(I have a WS48 battery box which will do for the WS18, and it's unlikely that I would get the bits to resurrect either of these units.)

Chris.