How To: C15a Wire-3 restoration

[Mike Cecil]

Jordan,

Have you balanced the inflow through the nozzle with the outflow to the holding bucket, or are you just pumping from the holding bucket until it is empty? Can't see from the image.

If you have created a complete circuit where inflow = outflow, then you can use a two bucket system to settle the used liquid before re-using it. Outflow into bucket 1 where the larger sediment settles out to the bottom. Bucket 1 connects to bucket 2 via an overflow pipe near the top edge, with a baffle around the overflow pipe inlet. Pump to the nozzle draws liquid from bucket 2. It means you also have twice as much cleaning liquid in the system.

Just a thought.

Mike