Info needed: for a 13-3-53 CDN Jeep

[Bob Carriere]

Thanks Rob.

We have a spare 24v sending unit as well as a mechanical oil guage to start with...... then we will tackle the pump replacement.

At 61K on the clock, assuming it is the original block, it may be tired.

Thanks for the tips.....will post results.

Bob C

[rob love]

The serial number for the block should be on top of the water pump on a little flat surface there. If it is a military engine, it should start with MD

[Bob Carriere]

...area is smooth as a baby's bottom.... will try removing the grey paint but doubt there are any indentation/numbers...... which would mean?????

Will be tackling the pump, leaking oil line and a mechanical gauge next Wed.

The owner will prep. the patient by jacking up on stands, removing the fender and front tire..... then we get dirty!!!!

need to work on the photos we have taken today.

Cheers

[rob love]

No numbers means a replacement block, most likely post service.

[Bob Carriere]

will need to do in two postings.

[Bob Carriere]

Would appreciate comments on the ID tag...

...........thanks for all your help guys.

Next Wednesday we operate!!!!!

[Owen Evans]

The carb is a Carter YS950S; standard fitting for the M38A1.

Owen.