Ford cmp clutch question

[Grant Bowker]

Based on the 8mm given by others above, I believe the rod and yokes are threaded 5/16-24 (fine thread).

[Jacques Reed]

Hi Grant,

Just checked my rod. That is correct. Threads are 5/16-24 UNF

Cheers,

[Alex van de Wetering]

Easy to make up what ever length you need two clevis ends, two lock nuts, and length of shaft.

Hi Phil. I intend to do so. I have got the rods and the clevis ends which are available at Macs and also the Chev parts suppliers. So, I have the parts to make something that works........however, the original is a rod with clevis as one part....and a seperate nut and clevis at the other end. The clevis that is part of the rod is shorter than the seperate clevis at the other end. So, i was interested to see if the rod-clevis part was an off-the shelve item available at one of the parts suppliers......just to get that bit more originality that the Pebble beach judges love....

Alex