Info needed: M38A1 flasher/signal unit on the steering column

[rob love]

Go to this thread: http://www.mapleleafup.net/forums/sh...ad.php?t=21154

There will be the wiring diagram for the CDN3. Use that as your guide. By looking at the pin on the plug at the controller, you can then discern which wire they should be. Not sure why your harness has letters on the wires rather than the normal numbers.

[Les Kovacs]

Hi Rob....thanks for the link and diagram....although I do have that diagram from a pic off of google and like that one when zoomed in it becomes too blurry to read.

Yes, the harness (old & new)from the lever to the flasher has numbers eg: (460-22) but the harness which carries the wiring to the four signal lamps have letters...go figure?

Thanks,

les

[rob love]

Those letters are likely the pin numbers at the controller connector. I can see most of them on the diagram, along with their wire numbers, so it should be easy enough to translate them into the wire numbers.

Alternatively, you can contact Dave/302 trooper, who posted those diagrams and ask for the full size to be emailed to you. Again, check that thread.