![]() |
|
#1
|
||||
|
||||
![]()
Colin,
Something else, on the dashboard in the centre is a socket for a 2-pin plug to use an inspection lamp, these 2-pin plugs and sockets were a common household item in my younger days, for table lamps, etc. Finding plugs and sockets was not so easy, but I did find one at home then some popped up on Ebay. I recall there is another socket on hull offside under the armour above engine bay, there was another in the turret which fed the spotlight, so the crew could unplug and use a inspection lamp if needed. The spotlamp is a commonly used Simms and they still appear at swapmeets and dealers at times. also fitted to Matilda. Here is a picture of the 2-pin plug, socket is identical shape: http://www.plugsocketmuseum.nl/GB/BS372_5A-2p_plugs.jpg
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#2
|
||||
|
||||
![]()
Nice brand new rubber and they did an excellent job.
|
#3
|
||||
|
||||
![]()
Colin, hope these are of some use.
George P6130075.jpg pic207.jpg TankLightMarkVIc71.jpg vickers_02.jpg vickers_03.jpg |
#4
|
||||
|
||||
![]()
This id from the IPL......if only we could track the original drawings with dimensions.....if only.
Sorry its a bit feint, I have better, but in larger format. George. cc409132017_0008.jpg |
#5
|
||||
|
||||
![]()
George, that's fantastic as you have just answered a bit more to the puzzle. The drawing here looks like a part of the collective group that I have but I never had that one. Do you have any other drawings.
|
#6
|
||||
|
||||
![]()
Hi Colin,
Looking at George's post with the two photos, I am sure these are of Platypus, I can see my cabling, and if you look at the photo looking back past the drivers seat, on the upper left is the air cleaner, which I think was fabricated to a pattern on the Bovington museum's Mk6B. According to the manual it should be rectangular filter, maybe George has illustrations in the parts list? also, just under the air filter you can just spot the Festoon lamp. Something else just come to mind, the oil cooler, that was made from a Saracen oil cooler if I recall and looked the part. cheers Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#7
|
||||
|
||||
![]()
Hi Richard, yes they are of platypus as I too have some very similar. Fortunately, I do have an original oil cooler is excellent condition and I do have a drawing of the air cleaner and it is round so perhaps the Bovington one is original. It is great to see a photo of the fuse box lid which I assume is original.
|
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Door Resto | Barry Churcher | The Restoration Forum | 13 | 15-05-22 15:36 |
FAT cab 13 No 9 resto | Mrs Vampire | The Softskin Forum | 27 | 29-09-21 06:11 |
C15A resto | harrygrey382 | The Restoration Forum | 9 | 08-06-15 09:40 |
another CAN m37 resto | Steve Wilson | The Restoration Forum | 11 | 25-08-12 15:57 |
m 37 resto in new brunswick | pauljboudreau | Post-war Military Vehicles | 118 | 07-03-11 22:29 |